• Resources Recycling
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2013

Mineral carbonation has been proposed as a possible way for $CO_2$ sequestration. The electric arc furnace slags consist of calcium, magnesium and aluminum silicates in various combinations. If they could be used instead of natural mineral silicates for carbonation, considerable energy savings and $CO_2$ emissions reductions could be achieved. Indirect aqueous carbonation of the slags consists of two steps, extraction of calcium and carbonation. Acetic acid leaching of electric arc furnace slags had been already studied to extract Ca in them, but it was reported that the carbonation of the extracted $Ca^{2+}$ in the leached solution would suffer from too slow kinetics, even at high pressure of $CO_2$. In this work, to develop more efficient extraction of the electric arc furnace slags, hydrochloric acid leaching to separate calcium from them was studied, and the results were compared with the acetic acid ones. The phase boundary between $Ca^{2+}$ and $CaCO_3$ in the solution with pH was determined by thermodynamic calculations. Hydrochloric acid was more effective than acetic acid for the extraction of Ca in electric arc furnace slag, and there is a possibility to recycle an unreacted hydrochloric acid in the leached solution by electrolysis or evaporation.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.427-432
• /
• 2004

The purpose of this study is to investigate the feasibility of a cosolvent-modified supercritical $CO_2\;(scCO_2)$ extraction technique for the production of licorice extracts with high levels of glabridin. The effects of various parameters such as the type and amount of modifiers, extraction temperature ($40{\sim}80^{\circ}C$) and pressure ($10{\sim}50.0\;MPa$) on the extraction efficiency were examined at a fixed flow rate of 1 mL/min. The organic solvent extraction with pure methanol was also conducted for a quantitative comparison with the $scCO_2$ extraction. The recovery of glabridin from licorice was found to be extremely small for pure $scCO_2$. However, the addition of modifiers such as ethanol and acetone to $scCO_2$ resulted in a significant improvement in the recovery of glabridin. The recovery of glabridin was observed to increase with pressure at a constant temperature. Furthermore, the purity of the glabridin obtained from the $scCO_2$ extraction was higher compared with the organic solvent extraction.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.51-57
• /
• 2020

Separation of Co and Ni over Mg from the sulfuric acid solutions using Cyanex272, PC88A and Versatic acid 10 as an extractant was carried out. From the comparative studies about the extraction behavior of Co, Ni and Mg, Versatic acid 10 was superior to Cyanex272 and PC88A for the selective extraction of cobalt and nickel from the mixed solutions. About 98% of Ni and Co were extracted at equilibrium pH 7.0 and less than 5% of Mg was co-extracted by Versatic acid 10. McCabe-Thiele diagram indicated two stages requirement for Co and Ni extraction by 10% Versatic acid 10 at pH 7.0 and phase ratio (A/O) of 2.0. The loaded Co and Ni in organic phase was stripped effectively the sulfuric acid concentration above 70 g/L. 99.78% of cobalt and 98.42% of nickel were stripped.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.303-310
• /
• 2013

Velvet deer antler (VDA) is well known oriental medicine claimed to have tonic activities as improving bone mineral density (BMD), immune-enhancing, rejuvenating and many other medicinal activities. Ossified deer antler (ODA) is bony product produced by over-calcification of deer antler due to late harvesting. The extraction efficiency of ODA by conventional boiling in water must be very poor due to bony nature, hence the reputations for the medicinal efficacies of ODA has been highly under-evaluated compared to that of VDA without any experimental evidences. Employing our new efficient water extraction process ($135^{\circ}C$), the extracts of ODA and VDA were analysed to compare the contents of bioactive components and the potencies of pharmacological activities. The results showed that; 1) The $135^{\circ}C$ extraction (autoclaving) of ODA gave highly increased amount of biomass, 120% more than the conventional extraction by 100-boiling, whereas the same treatment for VDA showed only 15% increased amount of biomass. 2) Feeding the ODA- or VDA-extracts to oophorectomized rats showed very potent BMD-recovering activity. 3) During the ossification of deer antler, the total collagen content was found to be increased by addition of type-1 to pre-existing type-2 collagen, but not replacement of type-2 to type-1 collagen. High titer of peptide hormones like growth hormone and IGF-1 were detected in the ODA- and VDA-extracts and also in the serum of ODA- or VDA-treated oophorectomized animals dose-dependently. Present experimental data will give a conclusion that folkloric poor reputations on ODA must be concerned only with poor extraction efficiency of conventional $100^{\circ}C$ water extraction and not based on the composition of bioactive substances of ODA.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.329-337
• /
• 2005

Because of their unique properties, supercritical fluids have been known as one of the most promising materials for the future technology. Supercritical fluid technologies have been widely applied to various operations such as extraction, impregnation, nano-particle generation, oxidation, reaction etc. Industrial applications, especially their successful usage of supercritical fluid, have been reviewed. A special case for the first successful industrial application of supercritical $CO_2$ extraction in Korea was reviewed. Its unique characteristics of enriched antioxidant, $'\grmma-tocopherol'$ enabled this industrial application in Korea in spite of its low market price. Also its size and operation conditions were known as world records.

• Advances in nano research
• /
• v.10 no.3
• /
• pp.295-312
• /
• 2021

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.1-5
• /
• 1998

A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.33-40
• /
• 1999

The extraction characteristics of lipids from powdered sea mustard have been investigated by the use of supercritical carbon dioxide($SC-CO_2$) and cosolvents. The extraction rate was increased as the particle size of the sea mustard is smaller, the pressure is higher, the temperature is lower, and the quantities of the fluid is more. However, the extraction yield of lipids from sea mustard was almost constant at a given condition. The optimum extraction condition was determined with the extraction yield of $1.45wt\%$ at 300um of particle size, 313K of $SC-CO_2$ temperature, 13.8MPa of pressure, and 30L/min of flow rate. Ethanol was the most efficient cosolvent among ethanol, methanol, and hexane. The extraction yield was increased at about 2.21times by the addition of ethanol as a cosolvent to $SC-CO_2$. As the residence time and the average concentration of lipids were decreased, the mass transfer parameter($k_fa$) was increased. But the opposite result was obtained when the ethanol was used as cosolvent.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.285-295
• /
• 2014

Citrus essential oil were extracted from citron peel of cultivated in Gohong (CCP) using environmentally friendly supercritical carbon dioxide method. Antioxidant activity and aroma composition of the essential oils extracted by the SC-$CO_2$ method were evaluated by comparing with those extracted by organic solvent method. Fatty acid composition, DPPH scavenging, and antioxidant activity of the oils obtained by different extraction condition of SC-$CO_2$ method were investigated and their antioxidant activities were compared with commercially available lavender, eucalyptus and tea tree oils. As the results, linoleic acid was most abundantly found from CCP oil extracted by the SC-$CO_2$ method and cis-11,144-eicosadienoic acids was second abundantly found. Radical scavenging ability of DPPH was 98% when the concentration of CCP oil was 50 mg/mL. This scavenging ability increased with the increase of oil concentration. On the other hand, flavonoids content (84 mg/100g) of the CCP oil extracted by the SC-$CO_2$ method was slightly higher than that (75 mg/100g) by hexane extraction. The results, obtained from CCP oil by GC-MS, indicated that, among 66 components, the content of terpenes was 55.8% and limonene was 27.3%.

• Resources Recycling
• /
• v.10 no.2
• /
• pp.20-26
• /
• 2001

Sulfuric acid leaching of Mn, Co and Fe from spent petrochemical catalyst was performed using hydrogen peroxide as a reducing agent. Low extraction of Mn, Co and Fe was obtained by only sulfuric acid. When hydrogen peroxide were added as a reducing agent, the high extraction of these metals could be obtained. Different from ordinary leaching, the extraction per-centages of metal components decreased with elevating leaching temperature in this process. Under the optimum condition, the extraction percentages of Mn, Co and Fe were 93.0% , 87.0% and 100% respectively.