• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.84-91
• /
• 2015

The purpose of this study is to suggest the reasonable model of the caliber in suction nozzle, the pressure of suction nozzle, and the flow rate about foam system of line proportioner type using in the pumpcar. To test this, the experimental study was accomplished on the ground of the standards for the Performance Certification and Product Inspection of Foam Fire-extinguishing Chemical Mixing Machine. Aqueous Film Forming Foam in 3% and pipe type air foam nozzle with line proportioner FE 40 type were used. Test result showed that the pressure of suction nozzle within the limits between 0.25 MPa and 0.35 MPa was appropriate when the caliber in suction nozzle is 4 mm. Also, the pressure of suction nozzle within the limits between 0.45 MPa and 0.60 MPa was appropriate in the higher pressure than 4 mm when the caliber in suction nozzle is 5 mm.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.811-823
• /
• 2019

Slip form method is applied to many cases of a shaft these days because it is safer, more economical and faster than cast-in-place method. Slip-up height of the method is approximately 2.5 to 4.0 m/day. If the temperature of concrete is outside the range of 10 to 30℃, the effects of changes in strength or elastic characteristics are significant. Therefore, it is difficult for slip-up speed to be higher than 3 m/day during winter construction. In addition, concrete has heat caused by hydration, which causes temperature cracking of hardened concrete. Therefore, temperature control of concrete curing is necessary for the continuous slip-up of slip form. In this study, the rebound hardness, time of ultrasonic waves propagation, heat of hydration, and external temperature are measured by developing heating panels and test devices for the continuous slip-up. Based on this, heating slip form is manufactured; this was applied to "Kimpo sites" and "Sinwol sites". The compared slip-up speed samples were 1.9 m/day or 0.200 m/hr on average at Gimpo sites (08:00~17:30) and 2.0 m/day or 0.210 m/hr at Sinwol sites.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.30-37
• /
• 2018

This study is an analysis of combustion characteristics of synthetic insulation materials such as houses and warehouses. Using combustion cone calorimeter and SEM, the researching has experimented combustion characteristics of four kinds of materials such as flame retardant styrofoam, general styrofoam, urethane and gypsum board. And analyzed. As a result of the test, the ignition time (TTI) for the thermal insulation material was found at 27 s~43 s, and the flame retardant styrofoam was ignited at the lowest TTI at 27 s and disappears at 28 s. In addition, the maximum heat release rate (peak HRR) and average heat release rate (mean HRR) of each material were expressed in the following order: urethane> flame retardant styrofoam> styrofoam> gypsum board. Also, the total smoke release ($m^2/m^2$) was the largest at $30.798m^2/m^2$ in flame-retardant styrofoam. The general CO concentration of styrofoam was 0.275 kg/kg and the emission concentration was 12.807 kg/kg. The residues showed the highest 0.029 g in the gypsum board among the above materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.133.2-133.2
• /
• 2010

Fischer-Tropsch synthesis (FTS) was carried out in heat-exchanger typed reactor with cobalt metallic foam catalyst. Considering the heat and mass transfer limitations in the cobalt catalyst, a Co-foam catalyst with an inner metallic foam frame and an outer cobalt catalyst was developed. The Co-foam catalyst was highly selective toward liquid hydrocarbon production and the liquid hydrocarbon productivity at $203^{\circ}C$ reached to $52.5ml/(kg_{cat}{\cdot}h)$, which was higher than that obtained by the Co-pellet. Furthermore, the heat-exchanger typed reactor was developed to efficiently control the highly exothermic reaction heat. The reaction heat generated in the FTS reaction on the cobalt active site was easily transferred to reactor wall by the metallic foam in the catalyst and the transferred reaction heat was directly removed by the hot oil which circulated the wall side of the heat-exchanger typed reactor.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.219-230
• /
• 2020

This study was conducted to determine the optimum medium and humidification period for the strawberry (Fragaria × ananassa Duch. cv. Maehyang) cutting seedling production. The cuttings were planted in coir (CO), rockwool (RW), phenolic foam (PF), and organic foam medium (OFM) with fogging treatment in 0, 3, 6, 9, or 12 days on February, 2019. And, as the field verification examination research, cuttings were planted in CO, RW, PF, and OFM, with misting treatment in 0, 6, 9, 12, or 15 days on June, 2019. In fogging treatments, rooting and survival rates of seedlings tended to increase with longer fogging periods, and rooting and survival rates were showed significantly higher in CO medium with more than 9 days of fogging periods. In misting treatments, rooting rate was significantly higher in CO and RW medium with more than 9 days of misting periods, and survival rate was significantly higher with more than 12 days of misting periods. There was no significantly difference by growth medium and humidification period in shoot and root growth. Therefore, when considering the rooting and survival rate the CO medium with 9 days of humidification period could be beneficial for the production of the 'Maehyang' strawberry cutting seedlings.

• Journal of Sericultural and Entomological Science
• /
• v.54 no.1_2
• /
• pp.17-22
• /
• 2016

Rearing environment direct effects on oviposition preference of black soldier fly(Hermetia illucens). In this study, the number of egg-filled flutes was surveyed according to the size of adult rearing cages and oviposition media of black soldier fly (BSF). The height of the adult rearing cages were fixed at 2 m and provided different sizes of width and length and released 20,000 BSF adults in the rearing cages. The mean number of BSF egg-filled flutes was 895.4 at $4{\times}4m$ cage, 876.3 at $2{\times}1m$ cage and 62.3 at $1{\times}1m$ cage. Comparison of egg-filled flutes was according to cages material of adult BSF. The mean number of egg-filled flutes were 820.7 and 604.3 at different cage materials such as mosquito net and green house film. The mean numbers of egg-filled flutes were 326.6 in green floral form, 135.2 in green corrugated cardboard and 41.0 in brown corrugated cardboard. And the mean number of egg-filled flutes were similar floral form with the corrugated cardboard was overlapped by floral form such as 57.7 and 64.7. The mean number of egg-filled flutes was 29.0 and 48.2 in 6 mm and 4 mm diameter of oviposition hole.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2524-2528
• /
• 2013

Cell opening characteristics dependent on the cell openers for the conventional formulation of a closed-cell polyurethane foam (PUF) was studied using 1-butanol and lithium salt of 12-hydroxystearic acid (Li-12HSA) as the reactive cell opening agents. While cell openining content of only 10.5 % was obtained for the sample with 4 phr of 1-butanol as the single reactive cell opener, that of 98.0% could be obtained for the sample with 2 phr of Li-12HSA as the reactive co-cell opener. As the results, it showed that a fully open-cell rigid PUF could be obtained by introducing a novel reactive cell opener, having a functional group able to form a bulky side-chain on the urethane networks, without severe loss of mechanical properties of the closed-cell PUF like cell size, bulk density, and thermal conductivity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.287-297
• /
• 2019

This study was carried out to evaluate the antioxidant, anti-inflammation, and whitening effect of Hordeum vulgare L. extracts and their fractions. Total polyphenol and flavonoid contents in fractions were varied from 13.58 to 40.06 mg GAE/g and 7.67 ~ 13.67 mg CE/g, respectively. Among the three fractions(chloroform, hexane, and water), $400{\mu}g/mL$ of the chroloform fraction showed similar antioxidant activity to ascorbic acid ($30{\mu}M$) against the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical. The chloroform and hexane fractions inhibited the NO production of RAW 264.7 cells similar to quercetin ($15{\mu}M$) and the chloroform fraction of $100{\mu}g/mL$ significantly reduced IL-6, iNOS and COX2 gene expression. Additionally, the chloroform fraction inhibited ${\beta}$-hexosaminidase degranulation, IL-4, and IL-13 gene expression in RBL-2H3 cells. All of the fractions inhibited tyrosinase activity in a concentration-dependent manner, and the hexane fraction at $50{\mu}g/mL$ and the chloroform fraction at $100{\mu}g/mL$ significantly inhibited melanin production of B16F10 cells. These results indicated that H. vulgare L. can be used as an effective cosmetic ingredient having anti-inflammation and whitening activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.17-25
• /
• 2016

In this study, the air quality of underground and overground railway stations was evaluated focusing on the degree of influence of the outside air quality. The measured components were particulate matter ($PM_{10}$), carbon dioxide ($CO_2$), carbon monoxide (CO), nitrogen dioxide ($NO_2$), formaldehyde (HCHO), ozone ($O_3$), total airborne bacteria (TAB), total volatile organic carbon (TVOC), and Radon (Rn), which are included in the maintenance standards and recommended standards of the Indoor Air Quality Management Act. Also, the indoor/outdoor concentration ratios of $PM_{10}$, $NO_2$, and $O_3$ were calculated to estimate the influence of the outdoor air quality. The concentrations of $PM_{10}$ HCHO, TVOC, $NO_2$, and Rn in the underground stations were found to be higher than those in the overground stations. These results indicate that the (present) generation of contaminants are caused by the indoor source of the underground station. The ozone concentration of the overground stations was higher than that of the underground stations, which indicates that the outdoor ozone concentration influenced that of the overground stations directly. Thus, methods of improving the IAQ should take into consideration the types of contamination.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.115-123
• /
• 2011

Because buildings recently built have been highly insulated and highly airtight, it is impossible to emit toxic substances from interior finishing materials only by natural ventilation. Therefore, they cause indoor air pollution and it may threaten the user"s health such as atopic dermatitis, bronchial asthma and (allergic) rhinitis. Domestically, users spend indoors 80 percent of their time of a day. With the increased interest in indoor air quality, the introduction of forced ventilation system for new-built apartment buildings has been legislated. However, toxic substances from indoor are mostly below there commended standard approximately 23 months later. Thus, this study has assumed the status of the apartment buildings 23 months later through a simulation, regarded $CO_2$ as an exclusive indoor air pollution source. In the process of effectively eliminating the $CO_2$, this study has also been conducted on an operating plan that can provide superior performance from the energy side.