• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.105-109
• /
• 2008

In our country, limiting nutrient is known as phosphorus in the most lakes. Therefore, the removal of phosphorus is a very important process in sewage treatment. However, many of the sewage treatment plants employ the conventional activated sludge process, known to remove $10{\sim}30%$ of phosphorus. Thus, additional phosphorous removal process will be needed. Oyster shells have been known to remove phosphorus in water. The removal efficiency of phosphorus was highest at smallest size of oyster shells and at the highest pH for batch test. The phosphorous removal rate with various calcium concentrations was increased by increasing calcium concentration. At the 20 mg/l of calcium, more than 90% of phosphorous was removed in two hours. The removal efficiency of phosphorous was increased greatly at 300% of recirculation rate. With 300% of recirculation rate, the removal efficiency reached 80% at pH 11. The negative effects of bicarbonate on crystallization were observed in oyster shells. The effects of bicarbonate on rate constant were also investigated by applying these results to experimental equation. The rate constant was decreased at the inverse logarithm bicarbonate concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.852-859
• /
• 2006

The novel microbial process such as Anammox(anaerobic ammonium oxidation) and Canon(completely autotrophic nitrogen removal over nitrite) processes is promising biotechnology to remove nitrogen from ammonium-rich wastewater like anaerobic sludge digester liquid. In this research, a new Canon-type nitrogen removal process adopting upflow granular sludge bed type configuration was investigated on its feasibility and process performance, using synthetic wastewater and sludge digester liquids. Air as an oxygen source was provided in an external aeration chamber with flow recirculation. In the first experiment using the synthetic wastewater(up to 110 mg $NH_4$-N $L^{-1}$), the ammonium removal was about 95%(92% for T-N) at effective hydraulic retention time(HRT) for 3.8 days. In the second experiment using the sludge digester liquids($438{\pm}26$ mg $NH_4$-N $L^{-1}$), the total nitrogen removal was $94{\pm}1.7%$ at HRT for 5.4 days and $76{\pm}1.5%$ at HRT for 3.8 days, respectively. Little nitrite and nitrate were observed in the effluent of both experiments. The process revealed quite a lower oxygen($0.29{\sim}0.59$ g $O_2$ $g^{-1}N$) and less alkalinity($3.1{\sim}3.4$ g $CaCO_3$ $g^{-1}N$) consumption as compared to other new technology in microbial nitrogen removal. The process also offers the economical compact reactor configuration with excellent biomass retention, resulting in lower cost for investment and maintenance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.655-655
• /
• 2013

그래핀은 높은 전자 이동도, 열전도도, 기계적 강도, 유연성 등의 고유한 특성으로 다양한 분야에 응용하기 위한 연구가 수행되고 있으며, 특히 전자 소자에의 적용에 관한 연구가 활발히 이루어지고 있다. 전자 소자에 적용하기 위해서는 성장 및 물성에 관한 규명, 응용 소자에 따른 특성 평가가 필요하다. 이러한 소자 특성은 그래핀 물성에 의한 영향이 기본적이지만 에칭, 전사 등의 공정 중 발생하는 오염, 표면 특성, 잔여물 등에 의한 물성 변화 또한 분석 및 제어에 관한 연구가 필요하다. 열화학증착법(thermal chemical vapor deposition)을 이용한 그래핀 합성은 구리 기판을 사용하며, 합성된 그래핀의 에칭, 박리 및 전사 공정이 있다. 이러한 공정 중 발생하는 오염 입자가 그래핀 표면에 흡착되거나, 제거되지 않은 PMMA 잔여물이 그래핀의 특성에 영향을 미치게 된다. 따라서 본 연구에서는 $CO_2$ 클러스터의 표면 충돌을 이용하여 이러한 오염 물질 및 잔여물을 제거하고 그래핀 표면을 평탄화하는 것에 관한 연구를 수행하였다. 가스 클러스터란 작동기체의 분자가 수십에서 수백 개 뭉쳐 있는 형태를 뜻하며 이렇게 형성된 클러스터는 수 nm 크기를 형성하게 된다. 그리고 짧은 시간의 응축에 의해 수십 nm 크기 까지 성장 하게 된다. 클러스터를 이용한 표면 처리는 충돌에 의한 제거에 기반 한다. 따라서 생성 및 가속되는 클러스터로부터 대상으로 전달되는 운동량의 정도가 세정 특성에 영향을 미치며 이는 생성되는 클러스터의 크기에 종속적이다. 생성 클러스터의 크기 분포는 분사거리, 유량, 분사 각도, 노즐 냉각 온도 등의 변수에 관한 함수이다. 본 연구에서는 이러한 변수들을 제어하여 클러스터를 이용한 그래핀 표면 처리 실험을 수행하였다. 평가는 클러스터 표면 처리 전과 후의 특성 비교에 기반 하였으며, 광학 현미경을 이용한 표면 형상 측정, 라만분광 분석, AFM을 이용한 표면 조도 측정, 그래핀 면저항 측정 결과를 비교하였다. 평가 결과를 통하여 표면 처리를 하지 않은 그래핀에 비하여 면저항과 표면 조도가 낮아지는 것을 확인 할 수 있었다. 또한 클러스터 세정은 300 mm 웨이퍼 크기 이상의 대면적을 짧은 시간에 건식으로 세정할 수 있다는 장점이 있어 향후 최적화를 통해 그래핀 양산 시 특성 향상을 위한 후처리 방법으로 사용될 수 있음을 확인하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.362-368
• /
• 2005

The pH, alkalinity and calcium hardness could be adjusted by $CO_2$, $Ca(OH)_2$, and $Na_2CO_3$ addition in the water treatment process for corrosion protection of the water pipes. This research was performed to investigate the effect on the variation of water quality on the unit process by addition $CO_2$, $Ca(OH)_2$, and $Na_2CO_3$ in water treatment process. Carbon dioxide and lime were added before the coagulation basin and soda ash was added after the BAC process. pH and aklainity were increased at coagulation basin then after the water qualities had sustained similiarly to BAC process. There was no effect on turbidity and DOC removal efficiency during experimental period by addition\ $CO_2$, $Ca(OH)_2$, and $Na_2CO_3$ solution was added into clear well, the last process for optimum control of CCPP and is used mainly to control pH and alkalinity. In this research, average pH, alkalinity, and calcium hardness in treated water were 8.39, 61.4 mg/L as $CaCO_3$, 59.4 mg/L as $CaCO_3$, respectively and CCPP of treated water was higher than 29.5 mg/L to BAC process water, so adjusted water was expected to prevent internal corrosion of water pipe.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.214-223
• /
• 2020

This study evaluated CO₂ removal efficiency, monitoring data analysis / evaluation efficiency and energy reduction efficiency in the liquor factory by L-alanine applied scrubber. The average removal rate of the scrubber was 90.45%, and it was confirmed that the removal efficiency was excellent above 10,000ppm of inlet CO₂ concentration. After the scrubber operation, the CO₂ concentration in the workplace was maintained under 2,000ppm(the carbon dioxide reduction efficiency was about 74%). and the energy saving efficiency was calculated to 7.26% by reducing the power consumption. As a result of applying the developed product, it was possible to improve the working environment of workers by reducing the carbon dioxide concentration in the workplace at low concentration without ventilation, and to reduce the energy consumption. Therefore, it is expected that the scrubber will be useful as a high CO₂ removal process in food and liquor factories.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.243-251
• /
• 2010

Nitrogen oxides (NOx) in combustion flue gas are currently mitigated by chemical processes such as catalytic reduction, absorption and adsorption. However, development of environmentally sustainable biological processes is necessary in the near future. In this paper, the up-to-dated R&D trend of biological methodologies regarding NOx removal was reviewed, and their advantages and disadvantages were discussed. The principles and applications of bacterial system including nitrification and denitrification and photosynthetic microalgae system were compared. In order to enhance biological treatment rate and performance, the insoluble nitric oxide (NO) should be first absorbed using a proper solubilization agent, and then microbial degradation or fixation is to be followed. The use of microalgal system has a good prospect because it can fix $CO_2$ and NOx simultaneously and requires no additional carbon for energy source.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.335-342
• /
• 2018

Various technologies to cope with the energy and environmental issues related to the chemical and electric power industry are in development and demonstration stage. Especially, the absorption process of carbon dioxide ($CO_2$) using amine solution is a key technology of the $CO_2$ capture and storage (CCS). In this study, we identify the major risk factors and suggest strategies for safety improvement by analyzing and assessing commercial the amine-based $CO_2$ separation process. HAZOP method was used to assess the risk for the process. We provide facilities and operational strategies to mitigate or eliminate major risk factors by assessing the relative ranks of identified risk factors using a risk matrix.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.391-392
• /
• 2003

한전 원자력 환경기술원에서는 중ㆍ저준위 방사성폐기물 유리화 기술의 상용화 가능성을 입증하기 위한 유리화 실증설비를 건설하여 시험 중에 있으며 이 유리화 기술은 유도 가열식 저온로(Cold Crucible Melter, CCM)에 폐기물을 투입하는 기술로서 폐기물의 부피 축소 효과와 더불어 최종 고화물로 생성되는 폐기물의 침출율이 매우 낮은 장점을 지닌다. 이와 같은 유리화 공정은 기존의 소각처리에서와 같이 폐기물의 열적 산화과정에 의해 유해오염가스와 입자성 물질이 발생된다. 따라서 이를 처리하기 위해배기체 처리공정(Off Gas Treatment System, OGTS)을 설치하여 환경 배출기준(SO$_2$300ppm, NO$_2$ 200ppm, CO 600ppm, HCI 50ppm, 분진 100mg/Nm$^3$ 등)을 만족하도록 하였고 특히 입자성 물질은 후단 OGTS나 배관내 침적으로 인한 방사성 오염을 막기 위해 CCM 후단에서 효율적으로 제거되어야만 한다. (중략)

• Clean Technology
• /
• v.24 no.3
• /
• pp.157-165
• /
• 2018

In this study, the removal of $Si_3N_4$ particles from the surface of a silicon wafer was investigated by using supercritical carbon dioxide, the IPA co-solvent and cleaning additive chemicals. First, the solubility of several surfactants and binders in supercritical carbon dioxide solubility and particle dispersibility in the binders were evaluated in order to confirm their suitability for the supercritical cleaning process. Particle removal experiments were carried out with adjusting various process parameters and reaction conditions. The surfactants used in the experiment showed little particle removal effect, producing secondary contamination on the surface of wafers. On the other hand, 5 wt% (with respect to $scCO_2$) of the cleaning additive mixture of trimethyl phosphate, IPA, and trace HF resulted in 85% of particle removal efficiency after $scCO_2$ flowing for 4 minutes at $50^{\circ}C$, 2000 psi, and the flow rate of $15mL\;min^{-1}$.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.99-106
• /
• 2015

Polysulfone (PSF) hollow fiber membrane was prepared to separate $CO_2$ from the flaring gas. Fabricated PSF membrane system was fulfilled under 1 stage, 2 stage membrane process and simulation in order to confirm the operating condition for 99% of $CH_4$ and 1% of $CO_2$ concentration. Also, $25Nm^3/h$ bench scale $CO_2$ separation membrane system was operated under 1% of $CO_2$ concentration during 100 hr, and $CH_4$ recovery ratio was 98%.