• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.359-366
• /
• 2005

Most engineering optimization are based on numerical linear and nonlinear programming methods that require substantial gradient information and usually seek to improve the solution in the neighborhood of a starting point. These algorithm, however, reveal a limited approach to complicated real-world optimization problems. If there is more than one local optimum in the problem, the result may depend on the selection of an initial point, and the obtained optimal solution may not necessarily be the global optimum. This paper describes a new harmony search(HS) meta-heuristic algorithm-based approach for structural size optimization problems with continuous design variables. This recently developed HS algorithm is conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary. Two classical space truss optimization problems are presented to demonstrate the effectiveness and robustness of the HS algorithm. The results indicate that the proposed approach is a powerful search and optimization technique that may yield better solutions to structural engineering problems than those obtained using current algorithms.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.332-343
• /
• 2022

To address the problems of the gravitational search algorithm (GSA) in which the population is prone to converge prematurely and fall into the local solution when solving the single-objective optimization problem, a sine map jumping gravity search algorithm based on asynchronous learning is proposed. First, a learning mechanism is introduced into the GSA. The agents keep learning from the excellent agents of the population while they are evolving, thus maintaining the memory and sharing of evolution information, addressing the algorithm's shortcoming in evolution that particle information depends on the current position information only, improving the diversity of the population, and avoiding premature convergence. Second, the sine function is used to map the change of the particle velocity into the position probability to improve the convergence accuracy. Third, the Levy flight strategy is introduced to prevent particles from falling into the local optimization. Finally, the proposed algorithm and other intelligent algorithms are simulated on 18 benchmark functions. The simulation results show that the proposed algorithm achieved improved the better performance.

• 소성∙가공
• /
• 제6권5호
• /
• pp.416-424
• /
• 1997

In the present study, a contact search and check algorithm for general tool surface described by triangular FE patch is proposed. To improve numerical stability, SEAM element using the linear Coons interpolation has been used. To check the proposed algorithm, both clover cup and L-shape cup deep drawing processes are calculated. The computed results shows that the proposed contact algorithm can be successfully applied for sheet metal forming processes with general shaped tools.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.598-606
• /
• 2003

본 논문에서는 비동기 WCDMA 시스템의 빠른 셀 탐색을 위해 제안된 극성변조(PCM. Polarization Code Modulation) 셀 탐색 기법의 성능을 분석하고자 한다. 극성변조 셀 탐색 기법은 비동기 WCDMA 시스템의 표준 셀 탐색 알고리즘의 셀 탐색 시간을 단축하고 또한 수신기의 복잡도를 줄일 수 있는 기법으로, 홀드 코드를 이용하여 생성된 새로운 그룹 코드를 정의하고 이를 WCDMA P-SCH에 극성 변조하여, 기존 WCDMA의 2단계에서 사용되던 S-SCH의 그룹 코드(RS code)를 대체한다. 따라서 WCDMA 표준에 정의된 2개의 동기 채널을 하나로 줄일 수 있기 때문에 기존 WCDMA 셀 탐색 알고리즘에 비해 기지국 신호의 이득을 얻을 수 있는 기법이다. 본 논문에서는 극성변조 셀 탐색 알고리즘의 성능을 평가하기 긴하여 수학적 모델을 정의하고, 이를 통해 셀 탐색 성공 확률과 평균 탐색 시간을 이론적으로 분석하였다. 그 결과 극성변조 셀 탐색 알고리즘은 WCDMA 표준 셀 탐색 알고리즘의 성능에 비해 수신기 복잡도 측면과 셀 탐색 시간 측면에서 장점을 가지는 것을 확인할 수 있었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권7호
• /
• pp.448-453
• /
• 2006

본 논문은 평면 그래프를 위한 병렬 depth-first search (DFS) 알고리즘 [SIAM J. Comput., 19 (1990) 678-704]을 비 평면일 (non-planar) 수 있는 grid 그래프의 한 종류인 solid grid 그래프에 대해서도 수행 가능하도록 확장된 알고리즘을 제안한다. 제안 알고리즘은 Priority PRAM 모델에서 $O(n/sqrt{log\;n})$개의 프로세서로 수행했을 때 O(log n)의 병렬 시간이 소요된다. 우리의 지식으로, 이는 비 평면 그래프를 위한 첫 번째 결정적 NC (deterministic NC) 알고리즘이다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 학술대회
• /
• pp.217-220
• /
• 1996

This paper describes a new hierarchial block matching algorithm especially appropriate for a large search area. The proposed algorithm consists of higher level search for an initial motion vector estimate by using a new matching criterion over the evenly subsampled search points, and lower level search for the final motion vector refinement. In the higher level matching criterion, mean absolute differences at the search points (or motion vector candidates) similar to motion vectors of causally neighboring blocks, are weighted properly so that these points can have a higher chance to being selected. The proposed algorithm outperforms existing hierarchical block matching algorithms, and its computational regularity makes hardware implementation simple.

• 산업공학
• /
• 제17권spc호
• /
• pp.97-102
• /
• 2004

AGV flowpath layout design is one of the most important steps for efficient AGV systems design. Since it was formulated by Gaskins & Tanchoco (1987), a unidirectional AGV flowpath layout design problem has been tackled by many researchers. However, the solution methods were traded off between the solution quality and the computational time. In this paper, a tabu search technique is applied to obtain a good solution for a relatively large problem in reasonable computational time. Specifically, fast construction algorithm for feasible initial solutions, long-term memory structure and neighbor solutions generation are adapted to the problem characteristics and embedded in the tabu search algorithm. Also, sets of computational experiments show that the proposed tabu search algorithm outperforms to the Ko and Egbelu's algorithm (2003).

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.478-487
• /
• 2002

This paper presents a hybrid method to compute the solutions of an optimization Problem. The present hybrid algorithm is the synthesis of an artificial life algorithm and the random tabu search method. The artificial life algorithm has the most important feature called emergence. The emergence is the result of dynamic interaction among the individuals consisting of the system and is not found in an individual. The conventional artificial life algorithm for optimization is a stochastic searching algorithm using the feature of artificial life. Emergent colonies appear at the optimum locations in an artificial ecology. And the locations are the optimum solutions. We combined the feature of random-tabu search method with the conventional algorithm. The feature of random-tabu search method is to divide any given region into sub-regions. The enhanced artificial life algorithm (EALA) not only converge faster than the conventional artificial life algorithm, but also gives a more accurate solution. In addition, this algorithm can find all global optimum solutions. The enhanced artificial life algorithm is applied to the optimum design of high-speed, short journal bearings and its usefulness is verified through an optimization problem.

• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.1-8
• /
• 2009

The objectives of this study are to apply univariate search and genetic algorithm to tank model, and compare the two optimization methods. Hydrologic data of Baran watershed during 1996 and 1997 were used for correction the tank model, and the data of 1999 to 2000 were used for validation. RMSE and R2 were used for the tank model's optimization. Genetic algorithm showed better result than univariate search. Genetic algorithm converges to general optima, and more population of potential solution made better result. Univariate search was easy to apply and simple but had a problem of convergence to local optima, and the problem was not solved although search the solution more minutely. Therefore, this study recommend genetic algorithm to optimize tank model rather than univariate search.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.86-94
• /
• 1998

본 논문에서는 기존 고속 블럭 알고리즘보다 성능이 우수하고 하드웨어 구현에 적합한 새로운 MFSS(Modified Four-Step Search) 알고리즘을 제안한다. 제안하는 알고리즘의 추정 과정은 일정한 규칙을 갖기 때문에 하드웨어 구현에 적합하고, 모의실험을 통해 거의 FS(Full Search) 성능에 근접할 정도로 기존의 고속 움직임 추정 알고리즘보다 성능의 우수함을 확인하였다. 본 논문에서는 이러한 MFSS(Modified Four-Step Search) 움직임 추정 및 보상기 설계에서 중요한 고려 사항은 설계 결과의 하드웨어적인 크기와 출력이 나오기 까지의 필요한 지연 시간인데, 본 논문에서는 9개의 PE(Process Element)만을 이용하여 구현함으로써 전체 로직의 양을 최적화 하였고, 움직임 추정기와 보상기를 결합함으로써 메모리를 공유하고 필요한 지연시간도 줄이는 구조를 제안한다.