• 대한전자공학회논문지SD
• /
• 제43권11호
• /
• pp.1-7
• /
• 2006

이상적인(ideal) 이중-게이트(double-gate) 벌크(bulk) FinFET의 3차원(3-D) 시뮬레이션을 수행하여 전기적 특성들을 분석하였다. 3차원 시뮬레이터를 이용하여, 게이트 길이($L_g$)와 높이($H_g$), 핀 바디(fin body)의 도핑농도($N_b$)를 변화시키면서 소스/드레인 접합 깊이($X_{jSDE}$)에 따른 문턱전압($V_{th}$), 문턱전압 변화량(${\Delta}V_{th}$), DIBL(drain induced barrier lowering), SS(subthreshold swing)의 특성들을 살펴보았다. 게이트 높이가 35 nm인 소자에서 소스/드레인 접합 깊이(25 nm, 35 nm, 45 nm) 변화에 따라, 각각의 문턱전압을 기준으로 게이트 높이가 $30nm{\sim}45nm$로 변화 될 때, 문턱전압변화량은 20 mV 이하로 그 변화량이 매우 적음을 알 수 있었다. 낮은 핀 바디 도핑농도($1{\times}10^{16}cm^{-3}{\sim}1{\times}10^{17}cm^{-3}$)에서, 소스/드레인 접합 깊이가 게이트전극보다 깊어질수록 DIBL과 SS는 급격히 나빠지는 것을 볼 수 있었고. 이러한 특성저하들은 $H_g$ 아래의 ${\sim}10nm$ 위치에 국소(local) 도핑을 함으로써 개선시킬 수 있었다. 또한 local 도핑으로 소스/드레인 접합 깊이가 얕아질수록 문턱전압이 떨어지는 것을 개선시킬 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.671-676
• /
• 2005

A total of 50 individual catfish, the Tra (Pangasius hypophthalmus) cultivated in either floating cages (Tra-c) or in ponds (Tra-p) and the Basa (Pangasius bocourti) raised in three floating cages, were collected in two of the Mekong Delta provinces. The caudal fin of each individual fish was used for protein electrophoresis employing the SDS-PAGE method. The one fillet sides were used as a representative sample to determine the dry matter (DM), crude protein (CP), ether extract (EE) and amino acids (AAs). The catfish oil was extracted from the belly fats, and the fatty acid (FA) composition was analyzed. There were 21 bands of the Tra and the Basa. Protein bands of the two varieties were 28.6-33.3% polymorphic, while polymorphic individuals of the Tra ranged from 80.0 to 100.0%, and the Basa was 90.0% polymorphic. The phenotypic diversity (Ho) of the Tra ranged from 1.71 to 1.80, while the Basa ranged as high as 2.14%. Diversity values (H$_{EP}$) for genetic diversity markers were equal in the Tra and the Basa. The sum of the effective number of alleles (SENA) of both varieties ranged from 3.40 to 3.83 for the Basa and the Tra, respectively. The lower values of Ho and SENA, as compared with those of the fresh water prawn (Macrobrachium equidens) in the area, would suggest that the species with the low values will become extinct due to inbreeding; the gene pools of each observed population were below a suitable threshold. Many of the differences in the nutritional values of the Tra-c, the Tra-p and the Basa were measured; their nutrient values were comparable to fishmeal or fish oil. Most of the DM, CP, and EE were higher in the Tra, especially in the Tra-c. The essential AA content, especially that of lysine, was highest in the Tra-c, next highest in the Tra-p, and lowest in the Basa. Therefore, the amino acid patterns were closer to the ideal patterns in the same sequences. In contrast, the essential FAs were concentrated in the Basa fish oil. It was found that suitable selection of parents for seed production is required to avoid inbreeding. Catfish may be valuable sources of nutrition for both humans and animals, and the differences in their nutritional values by variety and/or management must be taken into account.

• 한국광물학회지
• /
• 제13권3호
• /
• pp.164-170
• /
• 2000

중성자 단결정 및 분말회절실험을 이용하여 이트리아를 첨가한 저코니아 (yttria-stabilized airconia, Zr0.73Y0.27O1.87) 결정의 구조 분석을 수행하였다 시료는 입방정계로써, 공간군 Fm/equation omitted/ a=5.155(2)$\AA$, V=136.99(5), Z=4로 결정화되었고, 중성자 단결정 회절실험의 결과로 얻어진 70개의 브라그 회절반점을 이용한 최종신뢰도 R(F) 및 $\omega$R(I) 값은 각각 0.0576, 0.1057 이었다. Zr과 Y 원자 들은 이상적인 형석 (CaF2) 구조의 cation 위치에 불규칙하게 배열되어 있었으며, 산소 원자들의 대부분 (95%)은 (1/4,1/4,1/4) 위치에서 <110> 방향으로 $\Delta$/a~0.033의 크기만큼 이동하였고, 나머지 산소 원자들은 <100> 방향으로 $\Delta$/a~0.033의 변위가 존재하였다. Rietveld 분석법을 이용한 중성자 분말회절실험의 결과는 단결정 회절실험에서 보여주었던 결정학적 정보와 모든 면에서 잘 일치하고 있었으며, 정방정계의 구조에서 기인되는 몇 개의 불순상의 존재가 최종 분석된 분말 회절상에서 확인되었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2201-2208
• /
• 2014

In this research, the characteristics of Brush-less DC (BLDC) motor in accordance with winding connection method, both Y-connection and D -connection, has been identified with design methodology simply. BLDC motor has been designed for both winding connections, and their torque analysis has been performed considering ideal current source analysis and voltage source analysis with 6-step control. In addition, to reduce torque ripple of BLDC motor, caused by coil inductance, on voltage source analysis with 6-step control, we have proposed suitable control method which is Phase Advance Control. It is verified that the torque ripple has been decreased by virtue of phase advance control, advancing and widening conduction angle of switching, via performance analysis by Finite Element Analysis.

• Composites Research
• /
• 제29권5호
• /
• pp.269-275
• /
• 2016

Multiscale hybrid composites, which consist of polymeric resins, microscale fibers and nanoscale reinforcements, have drawn significant attention in the field of advanced, high-performance materials. Despite their advantages, multiscale hybrid composites show challenges associated with nanomaterial dispersion, viscosity, interfacial bonding and load transfer, and orientation control. In this paper, carbon nanotube(CNT)/carbon fiber(CF)/polycarbonate(PC) multiscale hybrid composite were fabricated by a solution process to overcome the difficulties associated with controlling the melt viscosity of thermoplastic resins. The dependence of CNT loading was studied by varying the method to add CNTs, i.e., impregnation of CF with CNT/PC/solvent solution and impregnation of CNT-coated CF with PC/solvent solution. In addition, hybrid composites were fabricated through surfactant-aided CNT dispersion followed by vacuum filtration. The morphologies of the surfaces of hybrid composites, as analyzed by scanning electron microscopy, revealed the quality of PC impregnation depends on the processing method. Dynamic mechanical analysis was performed to evaluate their mechanical performance. It was analyzed that if the position of the value of tan ${\delta}$ is closer to the ideal line, the adhesion between polymer and carbon fiber is stronger. The effect of mechanical interlocking has a great influence on the dynamic mechanical properties of the composites with CNT-coated CF, which indicates that coating CF with CNTs is a suitable method to fabricate CNT/CF/PC hybrid composites.

• 한국지구과학회지
• /
• 제23권1호
• /
• pp.52-58
• /
• 2002

A colorless and transparent zirconium oxide ($Zr_{0.73}Y_{0.27}O_{1.87}$) crystal has been synthesized by the Bridgman-Stockbager method. The gem-quality material is produced by adding 20${\sim}$25 wt.% $Y_2O_3$ (stabilizer) and 0.04 wt.% $Nd_2O_3$ (decolorising agent) to the $ZrO_2$ powder. It shows a vitreous luster with a slight oily appearance. Under a polarizing microscope, it shows isotropic nature with no appreciable anisotropism. Mohs hardness value and specific gravity is measured to be 8${\sim}$$8{\frac{1}{2}}$ and 5.85, respectively. Under ultraviolet light it shows a faint white glow. The crystal structure of yttria-stabilized zirconia with 0.27 at.% Y has been re-investigated, using single crystal X-ray diffraction, and confirmed to be a cubic symmetry, space group $Fm{\overline{3}}m$ ($O^5_h$) with a=5.1552(5) ${{\AA}}$, V=136.99(5) ${{\AA}}^3$, Z=4. The stabilizer atoms randomly occupy the zirconium sites and there are displacements of oxygen atoms with amplitudes of ${\Delta}/a{\sim}$0.033 and 0.11 along <110> and <111> from the ideal positions of the fluorite structure, respectively.

• 공업화학
• /
• 제9권7호
• /
• pp.968-973
• /
• 1998

양이온성 계면활성제인 cetylpyridinium chloride(CPC)와 비이온성 계면활성제인 Triton X-100(TX-100)의 혼합계면활성제에 염(KCl과 $Na_2CO_3$)과 부탄올 이성질체(tert-부탄올, iso-부탄올과 n-부탄올)를 첨가하였을 때 변화되는 임계미셀농도값($CMC^*$)을 UV 분광광도법으로 측정하였다. 이들 $CMC^*$값들로부터 여러 가지 열역학적 함수값들을 유사상태분리모델(pseudo-phase separation model)을 이용한 식에 의해 계산하였으며 그 값들을 상호 비교하였다. 그 결과 염 및 부탄올 이성질체들을 첨가하였을 때 CPC/TX-100 혼합계면활성제의 미셀화는 순수 물에서의 경우보다 열역학적 함수값($X_1$, $\beta$, ${\gamma}i$, $ai^M$, $C_i$ 및 ${\Delta}H_{mix}$)들이 큰 차이를 보였으며, 또한 모두 비이상적 혼합미셀모델에 잘 일치하였으며 이상적 혼합미셀모델과는 음방향으로 크게 벗어남을 보였다.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.148-159
• /
• 2003

Statement of problem Metal-ceramic restorations have been used extensively by dental clinicians for nearly 40 years. Strength an functional ability of metal-ceramic restorations are proved to be satisfying, However esthetics and biocompatibility of metal alloy which is used in metal-ceramic restoration is not ideal. Using pure gold as an alternative, have advantage of esthetics, biocompatibility over conventional metal alloy. But there had been little article which studied on the color effect of pure gold on fual porcelain color. Purpose The purpose of this study was to spectrophotometrically evaluate the difference between color of metal alloy(Au-Pt, Ni-Cr) and pure gold, during color masking procedure with opaque porcelain and to analyze the differences, Material and Methods Three types of metal - base metal(Ni-Cr), high gold alloy(Au-Pt), pure gold(GES) - specimen were fabricated 1cm in diameter. Four steps were established - after finishing, after pre-coditioning, after application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness)- and tested color with spectrophotometer every each steps and analyzed with $CIEL^*a^*b^*$ color order system. One-Way ANOVA test was used to and out if there were significant differences between groups tested and Shaffe multiple comparison was used to identify where the differences were. Results 1. After finishing and pre-conditioning, pure gold(GES) group showed most high values in $L^*,a^*,b^*$. 2. After application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness), pure gold(GES) group showed the least difference in $L^*,a^*,b^*$ values and the lowest ${\Delta}E$ value(${\Delta}E$=0.63). 3. After application of first opaque porcelain and after application of second opaque porcelain differences that were significant (P<0.05) between groups were found only in $a^*$ values. 4. Base metal alloy group showed the lowest $a^*$ value in test after application of first opaque porcelain and the highest value in test after application of first opaque porcelain Conclusion Pure gold group and high gold group showed higher $a^*$ values than base metal group when tested after 0.08mm thickness of opaque porcelain was applied and pure gold group showed much similar $L^*,a^*,b^*$ values between 0.08mm thickness and 0.15mm thickness of opaque porcelain. This meant that pure gold was more easily masked by opaque porcelain than the other two groups.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• 공업화학
• /
• 제19권5호
• /
• pp.547-553
• /
• 2008

도막의 기능은 피도물의 노출 환경 및 요구되는 물성에 따라 수지종류와 경화제는 적절하게 설계되어야 그 기능을 충분히 발휘할 수 있다. 본 연구에서는 동일한 OH 함량을 가진 알키드 폴리올, 폴리에스테르 폴리올, 폴리에스테르 변성아크릴 폴리올 등과 $T_g$ 및 OH 함량이 다른 아크릴 폴리올 수지 등 6가지 폴리올수지를 사용하고, 경화제는 알리파틱 이소시아네트와 아로마틱 이소시아네트를 사용하였다. 총 12종류의 투명도료를 제조 후, 화학적, 기계적 물성시험과 DMA 및 Rheometer를 이용하여 폴리올 수지타입 및 경화제 타입에 따른 폴리우레탄 도료의 종류별 도막물성 및 작업성을 관찰하였다. 그 결과 폴리올수지에 있어서 각각 다른 물리적, 화학적 성질을 가지는 도료개발 및 도장작업성의 개선 시 적절한 폴리올수지 종류 및 경화제를 선택하여 상 하도의 물성 및 도장 시스템에 합리적으로 응용할 수 있는 결과를 얻었다.