• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.766-771
• /
• 2008

We fabricated single cells with a cathode consisting of a $LaNi_{0.6}Fe_{0.4}O_3-Ce_{0.8}Sm_{0.2}O_{1.9}$ composite (LNF-S20DC composite) active layer and an LNF current collecting layer on a ${0.89ZrO_2}-{0.10Sc_2}{O_3}-0.01{Al_2}{O_3}$ electrolyte sheet. The cathode layers were prepared by the screen-printing method. The cathode properties of these cells were measured by the AC impedance method at $800^{\circ}C$. The cathodes with the ceria-LNF composite active layer exhibited high power performance prior to current loading. We investigated the influence of the mixture ratio of LNF and S20DC on the cathodes properties. The Sm in the ceria particles of the composite cathode was substituted with other rare-earth elements. Cathodes with Pr and Gd co-doped ceria in the active layer provided the better performance than those with Sm- or Gd-doped ceria.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.787-792
• /
• 2005

A symmetrical LSCF $(La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta})\;ScSZ(89ZrO_2-10Sc_2O_3-1CeO_2)/LSCF$ electrochemical cell with a GDC (Gadolinium-Doped Ceria, $90CeO_2-10Gd_2O_3$) interlayer that was inserted between the LSCF cathode and ScSZ electrolyte was fabricated, and the electrochemical performance of these cells was evaluated. The GDC interlayer was deposited on a ScSZ electrolyte using a screen-printing technique. The GDC interlayer prevented the unfavorable solid-state reactions at the LSCF/ScSZ interfaces. The LSCF cathode on the GDC interlayer had excellent electrocatalytic performance even at $650^{\circ}C$. The Area Specific Resistance (ASR) was strongly dependent on the thickness and heat-treatment temperature of the GDC interlayer. The impedance spectra showed that the cell with a $15\~27{\mu}m$ thick GDC interlayer heat-treated at $1200^{\circ}C$ had the lowest ASR.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1553-1555
• /
• 1999

Recently, $SrBi_2Ta_2O_9$(SBT) and $Pb(ZrTi)O_3$(PZT) were much attracted as materials of capacitor for ferroelectric random access memory(FRAM) showing higher read/write speed, lower power consumption and nonvolartility. Bi-layered SBT thin film has appeared as the most prominent fatigue free and low operation voltage for use in nonvolatile memory. To highly integrate FRAM, SBT thin film should be etched. A lot of papers on SBT thin film and its characteristics have been studied. However, there are few reports about SBT thin film due to difficulty of etching. In order to investigate properties of etching of SBT thin film, SBT thin film was etched in $CF_4$/Ar gas plasma using magnetically enhanced inductively coupled plasma (MEICP) system. When $CF_4/(CF_4+Ar)$ is 0.1, etch rate of SBT thin film was $3300{\AA}/min$, and etch rate of Pt was $2495{\AA}/min$. Selectivities of SBT to Pt. $SiO_2$ and photoresist(PR) were 1.35, 0.6 and 0.89, respectively. With increasing $CF_4$ gas, etch rate of SBT thin film and $P_t$ decreased.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.690-695
• /
• 2007

Scandia stabilized zirconia (ScSZ) is adapted for electrolyte material of solid oxide fuel cell (SOFC) because of its high ionic conductivity and chemical stability. ScMnSZ1 powder having a composition of $((ZrO_2)_{0.89}(Sc_2O_3)_{0.1}(MnO_2)_{0.01})$ is synthesized by ultrasonic spray pyrolysis (USP) method. Porous ScMnSZ1 powder is obtained by using a pore forming agent. Microstructure and morphology, particle size distribution of porous powder synthesized with 3wt% pore forming agent are investigated. Sintered ScMnSZ1 sample with ground fine powder are also investigated their microstructure and electrical conductivity. The electrical conductivity of sintered ScMnSZ1 samples with ground fine powder was 0.082 S/cm, 0.127 S/cm and 0.249 S/cm at $750^{\circ}C$, $800^{\circ}C$ and $900^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.86-89
• /
• 2004

Organic thin film transistors (OTFTs) are fabricated on the plastic substrate through 4-level mask process without photolithographic patterning to yield the simple fabrication process. And we herewith report for the effect of dielectric surface modification on the electrical characteristics of OTFTs. The KIST-JM-1 as an organic molecule for the surface modification is deposited onto the surface of zirconium oxide $(ZrO_2)$ gate dielectric layer. In this work, we have examined the dependence of electrical performance on the interface surface state of gate dielectric/pentacene, which may be modified by chemical properties in the gate dielectric surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1661-1663
• /
• 2000

This study was to measure the dielectric characteristics of 0.05Pb($Al_{0.5}Nb_{0.5}$)-0.95Pb($Zr_{0.52}Ti_{0.48})O_3$[PAN-PZT] system ceramics according to the variation of $Cr_{2}O_3$, $Fe_{2}O_3$ addition amount. 0.0$\sim$1.2[wt%] and according to sintering temperature after creating the specimens with a general sintering way. The results of this study were summarized as follows : the dielectric constant at 20[$^{\circ}C$] reduced dy increasing additive on the whole. The dielectric loss was minimum value of 12.77[%], sintered at 1200[$^{\circ}C$], dopped with $Cr_{2}O_3$ 0.3[wt%] and minimum value of 10.89[%], sintered at 1200[$^{\circ}C$], dopped with $Fe_{2}O_3$ 0.6[wt%]. The variation rate of dielectric constant according to the change of frequency was decreased slowly by increasing frequency. The temperature coefficient of capacitance turned out increasing the stability of the temperature, decreased $Cr_{2}O_3$ 0.3wt% showed its minimum value 0.59[%/$^{\circ}C$], the maximum value 0.9[%/$^{\circ}C$] with $Cr_{2}O_3$ 3wt%.

• 대한방사성의약품학회지
• /
• 제8권1호
• /
• pp.45-49
• /
• 2022

With the development of monoclonal antibodies, therapeutic or diagnostic radioisotope has been successfully delivered at tumor sites with high selectivity for antigens. Different approaches have been applied to improve the tumor-to-normal ratio by considering the in vivo stability of radioimmunoconjugates as a prerequisite. Various stable and inert antibody radiolabeling techniques for radioimmunoconjugate preparation have been extensively evaluated to enhance in vivo stability. Antibody radiolabeling techniques should be rapid and easy; they should not disrupt the immunoreactivity and in vivo behavior of antibodies, which are coupled with a bifunctional chelator (BFC) to stably coordinate with a radiometal. For the design of BFCs, radiometal coordination properties must be considered. However, various diagnostic radionuclides, such as ⁸⁹Zr, ⁶⁴Cu, ⁶⁸Ga, ¹¹¹ln, and ^99mTc, or therapeutic radionuclides, such as ¹⁷⁷Lu, ⁶⁷Cu, ⁹⁰Y, and ²²⁵Ac, have been increasingly used for antibody radiolabeling. In addition to useful radionuclides, ⁶⁴Cu and ¹⁷⁷Lu with the most accessible or the highest production rates in many countries should be considered. In this review, we mainly discussed antibody radiolabeling techniques and conditions that involve ⁶⁴Cu and ¹⁷⁷Lu radiometals.

• 대한방사성의약품학회지
• /
• 제9권1호
• /
• pp.23-33
• /
• 2023

Prostate cancer ranks as the world's second most frequently diagnosed cancer among men, and is responsible for the fifth highest number of cancer-related deaths in this population. The development of effective diagnostic and therapeutic approaches for prostate cancer remains a major challenge in the field of oncology. Over the past few years, the prostate-specific membrane antigen (PSMA) has raised as a hopeful tracer for the diagnosis and treatment of prostate cancer.Various radioisotopes, such as ¹³¹I, ^99mTc, ⁶⁸Ga, and ¹⁷⁷Lu, have been used to label PSMA analogues, with varying degrees of success. Among these, ⁶⁸Ga-PSMA-11 and ¹⁷⁷Lu-PSMA-617 have emerged as the most promising radioligands for clinical use. Recently, researchers have been exploring the use of other radioisotopes, such as ²¹¹At, ⁸⁹Zr, ^64/67Cu, and ^203/212Pb, for the labeling of PSMA-targeted radioligands. These radioisotopes have unique properties that may offer advantages over existing radioligands, such as longer half-lives, higher specific activities, and different emission profiles. Efforts are currently underway to develop these radiopharmaceuticals and make them more widely available for clinical use. These exciting developments highlight the potential of PSMA-targeted radioligands for the diagnosis and treatment of prostate cancer, and provided significant implications for the management of this disease in the future. The current study aims to provide a comprehensive summary of the latest research and clinical applications of radiolabeled PSMA inhibitors for diagnoses and therapy of prostate cancer, emphasizing the exciting developments in the field and their potential impact on clinical practice.

• Korean Journal of Radiology
• /
• 제24권6호
• /
• pp.574-589
• /
• 2023

Radiopharmaceuticals targeting prostate-specific membrane antigens (PSMA) are essential for the diagnosis, evaluation, and treatment of prostate cancer (PCa), particularly metastatic castration-resistant PCa, for which conventional treatment is ineffective. These molecular probes include [⁶⁸Ga]PSMA, [¹⁸F]PSMA, [Al¹⁸F]PSMA, [^99mTc]PSMA, and [⁸⁹Zr]PSMA, which are widely used for diagnosis, and [¹⁷⁷Lu]PSMA and [²²⁵Ac]PSMA, which are used for treatment. There are also new types of radiopharmaceuticals. Due to the differentiation and heterogeneity of tumor cells, a subtype of PCa with an extremely poor prognosis, referred to as neuroendocrine prostate cancer (NEPC), has emerged, and its diagnosis and treatment present great challenges. To improve the detection rate of NEPC and prolong patient survival, many researchers have investigated the use of relevant radiopharmaceuticals as targeted molecular probes for the detection and treatment of NEPC lesions, including DOTA-TOC and DOTA-TATE for somatostatin receptors, 4A06 for CUB domain-containing protein 1, and FDG. This review focused on the specific molecular targets and various radionuclides that have been developed for PCa in recent years, including those mentioned above and several others, and aimed to provide valuable up-to-date information and research ideas for future studies.

• 자원환경지질
• /
• 제40권6호
• /
• pp.727-738
• /
• 2007

운봉지역 하상퇴적물에 대한 지구화학적 특성규명을 통해, 주성분원소 및 미량원소에 대한 자연 배경치를 제시하고, 그 기반암(압쇄상화강암, Kim et al., 1992)과의 비교를 통해 지구화학적 재해에 대해 예견하고자 한다. 73개의 하상퇴적 물시료를 물이 흐르고 있는 1차 수계를 대상으로 채취하였고, XRD, XRF ICP-AES, NAA를 이용하여 주성분원소 및 미량성분원소를 분석하였다. 운봉지역의 주성분원소 함량은 $SiO_2\;36.94{\sim}65.39 wt.%,\;Al_2O_3\;10.15{\sim}21.77wt.%,\;Fe_2O_3\;3.17{\sim}10.90wt.%,\;CaO\;0.55{\sim}5.27wt.%,\;MgO\;0.52{\sim}4.94wt.%,\;K_2O\;1.38{\sim}4.54wt.%,\;Na_2O\;0.49{\sim}3.36wt.%,\;TiO_2\;0.39{\sim}1.27wt.%,\;MnO\;0.04{\sim}0.22wt.%,\;P_2O_5\;0.08{\sim}0.54wt.%$의 범위를 보이며, 미량성분 및 희토류원소 함량은, $Cu\;4.8{\sim}134ppm,\;Pb\;24.2{\sim}82.5ppm,\;Sr\;95.9{\sim}739ppm,\;V\;19.9{\sim}124ppm,\;Zr\;52.9{\sim}145ppm,\;Li\;25.2{\sim}3.3ppm,\;Co\;3.87{\sim}50.0ppm,\;Cr\;17.4{\sim}234ppm,\;Hf\;3.93{\sim}25.2ppm,\;Sc\;4.60{\sim}20.6ppm,\;Th\;3.82{\sim}36.9ppm,\;Ce\;45.7{\sim}243ppm,\;Eu\;0.89{\sim}2.69ppm,\;Yb\;1.42{\sim}5.18ppm$의 범위를 보인다. 주성분원소의 함량비교에서 CaO, $Na_2O,\;K_2O$ 함량은 하상퇴적물에서 기반암(압쇄상화강암류, Kim et al., 1992)인 압쇄상화강암류보다 높게 나타난다. 그리고 $Al_2O_3$와 $SiO_2$는 하상퇴적물과 기반암(압쇄상화강암류, Kim et al., 1992) 모두에서 높은 상관관계를 보인다. 하상퇴적물에서는 $SiO_2$ 함량이 높아질수록 희토류원소 함량도 같이 증가하는 특징을 보이나, 압쇄상화강암류에서는 $SiO_2$ 함량이 높아질수록 희토류원소 함량은 감소하는 특징을 보인다.