• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2022

This study aimed to increase the targeting ability against PSMA in cell therapy using metabolic glycoengineering and biorthogonal chemistry and to visualize cell trafficking using PET imaging. Cellular membranes of THP-1 cells were decorated with azide(-N₃) using Ac₄ManNAz by metabolic glycoengineering. Engineered THP-1 cells were conjugated with DBCO-bearing fluorophore (ADIBO-Cy5.5) for 1 h at different concentrations and analyzed by confocal fluorescence microscopy and flow cytometry. For PSAM ligand conjugation to THP-1 cells, Ac₄ManNAz treated THP-1 cells were incubated with DBCO-PSMA ligand (ADIBO-GUL) at a final concentration with 100 µM for 1 h. To evaluate the effect on cell recognition, PSMA ligand conjugated THP-1 cells(as effectors) were co-cultured with PSMA positive 22RV1 (as target cells) at 3 : 1 a effector-to-target cell (E/T) ratio. The interaction between THP-1 and 22RV1 was monitored by confocal fluorescence microscopy. For preparing the radiolabeled THP-1, the cells were treated at the activity of ~ 740 kBq of [⁸⁹Zr]Zr(oxinate)₄/5 × 10⁶ cells. Radiolabeled cells were analyzed for determination of cell-associated radioactivity by gamma counting and viability using MTS assay. In the cytotoxicity assay, THP-1 cells did not have any cytotoxicity even when the Ac₄ManNAz concentration was 100 µM. In confocal microscopy and flow cytometry, THP-1 cells were efficiently labeled ADIBO-Cy5.5 in a dose-dependent manner, and the dose of 100 µM was the optimal concentration for the following experiments. The clusters of PSMA ligand-conjugated THP-1 cells and 22RV1 cells were identified, indicating cell-cell recognition over the cell surface between two types of cells. Cell radiolabeling efficiency was 54.5 ± 17.8%. THP-1 labeled with 0.09 ± 0.03 Bq/cell showed no significant cytotoxicity compared to unlabeled THP-1 up to 7 days. We successfully demonstrated that Ac₄ManNAz treated cells were efficiently conjugated with ADIBO-GUL for preparing the PSMA-targeting cells, and [⁸⁹Zr]Zr(oxinate)₄ could be used to label cells without toxicity. It suggested that PSMA-ligand conjugated cell therapy could be improved cell targeting and be monitored by PET imaging.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.2
• /
• pp.103-112
• /
• 2017

The combination of nanoparticle with radioisotope could give the in vivo information with high sensitivity and specificity. However, radioisotope labeling of nanoparticle is very difficult and radioisotopes have different physicochemical properties, so the radioisotope selection of nanoparticle should be carefully considered. $^{18}F$ was first option to be considered for labeling of nanoparticle. For the labeling of $^{18}F$ with nanoparticle, Prosthetic group is widely used. Iodine, another radioactive halogen, is often used. Since radioiodine isotopes are various, they can be used for different imaging technique or therapy in the same labeling procedures. $^{99m}Tc$ can easily be obtained as pertechnatate ($^{99m}{TcO_4}^-$) by commercial generator. Ionic $^{68}Ga$ (III) in dilute HCl solution is also obtained by generator system, but $^{68}Ga$ can be substituted for $^{67}Ga$ because of the short half-life (67.8 min). $^{64}Cu$ emits not only positron but also ${\beta}-particle$. Therefore $^{64}Cu$ can be used for imaging and therapy at the same time. These radioactive metals can be labeled with nanoparticle using the bifunctional chelator. $^{89}Zr$ has longer half-life (78.4 h) and is used for the longer imaging time. Unlike different metals, $^{89}Zr$ should use the other chelate such as DFO, 3,4,3-(LI-1,2-HOPO) or DFOB.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.263-268
• /
• 2013

In this study, we prepared poly(ethylene-ter-1-hexene-ter-divinylbenzene) using bridged rac-$Et[Ind]_2ZrCl_2$ metallocene catalysts. The effect of 1-hexene on the terpolymerization rate was evaluated. When cocatalyst/catalyst molar ratio was 3,000, catalytic activity indicated more than 8,000 which was very remarkable value. As polymerization time increased, the weight-average molecular weight of the terpolymer gradually increased to some degree. In case of a polymerization time of 50 minutes, the terpolymer became amorphous state. The molecular weight distribution and densities of the terpolymer were 110,000-200,000 and $0.85-0.89g/cm^3$, respectively. Thermal properties and structure of the terpolymer were also identified.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3352-3358
• /
• 2023

Nuclear medicine seems to be a decent choice of medicine in the recent decade. The radioactive isotopes ⁵¹Cr, ⁸⁹Sr, ⁹⁹Tc, ¹³¹I, ¹³³Xe, ¹³⁷Cs and ¹⁵³Sm are extremely essential in nuclear medicine. The excitation functions of the ⁵⁴Fe (n, α) ⁵¹Cr, ⁹²Zr (n, α) ⁸⁹Sr, ¹⁰²Rh (n, α) ⁹⁹Tc, 134Cs (n, α) ¹³¹I, ¹³⁶Ba (n, α) ¹³³Xe, ¹⁴⁰La (n, α) ¹³⁷Cs and ¹⁵⁶Gd (n, α) ¹⁵³Sm reactions were calculated in this study using the EMPIRE 3.2.3 and TALYS 1.95 nuclear codes. Additionally, the cross sections at 14-15 MeV were calculated using empirical formulae and the experimental data. The computer codes were compared to the experimental data and Empirical formulas as well as the evaluated data (TENDL 2021, JENDL 3.3, JENDL 5, JEFF 3.3, EAF 2010, CENDL 3.1, CENDL 3.2, ROSFOND 2010, FENDL 3.2 b, and BROND 3.1).

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.760-765
• /
• 2008

In this study, the effects of small amounts (${\leq}3\;mol%$) of Li doping on the sintering characteristics and electrochemical performance of $(ZrO_2)_{0.89}(ScO_{1.5})_{0.1}(CeO_2)_{0.01}$ (ScSZ) were investigated. By adding 3 mol% lithium, the densification temperature of ScSZ was reduced from the conventional temperature of $1400^{\circ}C$ to $1200^{\circ}C$. It was found that Li doping also led to changes in the Zr:Sc ratio at the grain boundaries. Correspondingly, the dispersion of lithium zirconia at the grain boundaries accelerated the growth of ScSZ grains and increased the grain boundary resistance at temperatures below $450^{\circ}C$. At elevated temperatures of $450{\sim}750^{\circ}C$, the electrical conductivity of the ScSZ after doping remained almost unchanged under air and reducing atmospheres. These results suggest that the addition of lithium is promising for use in low temperature co-firing of ScSZ-based components for intermediate temperature solid oxide fuel cells.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.236-242
• /
• 2014

Isospecific propylene polymerization behavior of meta- and para-Lewis base (E) functionalized unbridged zirconocenes ($[1-(E_n-Ph)-3,4-Me_2C_5H_2]_2ZrCl_2$, E = $NMe_2$, OMe; n = 1 or 2) was investigated under bulk conditions. Catalytic activity of the zirconocenes, and molecular weight and isotacticity of polypropylenes are found to be dependent on the position and number of the Lewis base functional groups in the zirconocenes. All the crude polypropylenes possess a broad molecular weight distribution and multi-melting transitions, indicating an involvement of multi-catalytic active species in the polymerization. The highest [mmmm] value of an isotactic portion of the polypropylenes reached 89%, which is higher than that (85%) from the well-known $C_2$-symmetric EBIZr (rac-$Et(Ind)_2ZrCl_2$) catalyst. These results support that the in situ generated, rigid rac-like cation-anion pair through the Lewis acid-base interactions between the functional groups of zirconocenes and methylaluminoxane anion is effective in the formation of isotactic polypropylene under bulk propylene polymerization conditions.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.536-544
• /
• 1997

본연구는 45 BaO-20B$_{2}$O$_{3}$-35Fe$_{2}$o$_{3}$(wt%)의 조성의 유리에 핵형성제로서 TiO$_{2}$또는 ZrO$_{2}$를 첨가한 조성에서는 barium ferrite(BaFe$_{12}$O$_{19}$)가 결정화되었다. TiO$_{2}$를 9wt%첨가한 조성에 대하여 활성화에너지와 진동수는 각각 235.45kJ/mol, 진동수 6.89x$10^{17}$S$^{-1}$이었으며, Avrami지수는 1$\leq$n $\leq$로서 일방향의 결정성장으로 나타났다. 또한, ZrO$_{2}$9wt% 첨가 조성에서는, 활성화에너지와 진동수는 각각 173.86kJ/mol, 2.65x$10^{14}$S$^{-1}$이었으며, Avrami지수는 2$\leq$n$\leq$3로서 이방향의 결정성장을 나타내었다.내었다.

• 한국해양학회지
• /
• v.1
• /
• pp.1-15
• /
• 1971

Some major and minor geochemical contents, such as Zr, Br, Ni, Sr, Zn, Mn, Ti and Fe, of ninety-seven sediment samples from the sea off eastern Korea have been analyzed by the fluorescence spectrometric techniques. Concentrations of elements showed 22-962ppm Zr(averaging 194.4ppm), tr-220 ppm Br(averaging 138.2ppm), 31-141ppm Ni(averaging 89.1ppm), 118-3,494ppm Sr(averaging 448.6ppm) 27-134ppm Zn(averaging 92.5ppm), 38-1,043ppm Mn(averaging 664.2ppm), 0.04-0.42% Ti(averaging 0.29%) and 0.57-4.02% Fe(averaging 2.76%). The ratios of Zn/Ti 10$\^$3/, An/Fe 10$\^$3/ and Ti/Fe were 0.27-6.43(averaging 3.27), 2.25-7.76 (averaging 3.46) and 0.04-0.18(averaging 0.11), respectively. From the results of geochemical analyses of sediments from the sea off eastern Korea represented the different types of sediment pattern are considered between the southern part and the northern part of the sea. The bottom sediments of the southern part were characterized with higher Sr and lower Zn, Br contents; higher Zr and lower Br contents; lower Br and lower Zn, Ti and Fe contents; and lower Zn and lower Ti and Fe contents.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.89-91
• /
• 2006

An analysis of a multi-pin remote welding for a DUPIC fuel fabrication was made to establish the optimum welding processes in a hot cell environment. An initial investigation for hands-on fabrication outside the hot cell was performed, and the constraints of a hot cell welding were considered. Preliminary welding performances to improve the RW process were also examined. The RW process was determined to be the best in a hot cell environment for joining the end plate to the end caps. This paper presents an outline of the developed RW machine for a DUPIC fuel fabrication and compares the characteristics of a Zr-4 end plate welding by using electrical resistance and LB methods. The weld nuggets of RW specimens and torque strengths of resistant and LB welded zones were also investigated.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.195-199
• /
• 2011

The effect of copper oxide on migration and interaction of protons in barium zirconate was investigated using density functional theory. One copper atom was substituted for a zirconium atom site, and a proton was added to a $3{\times}3{\times}3$ barium zirconate superstructure. An energy barrier of 0.89 eV for proton migration was the highest among several energy barriers. To investigate the interaction between multiple protons and a copper atom, two protons were added to the superstructure. Various proton positions were determined by the interaction between the two protons and the copper atom.