• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.174-176
• /
• 1996

In the YBCO matrix, 10wt.% Y$_2$BaCuO$\_$5/ (211 phase) was added, the final 211 content of YBCO made by MTG process could reach about 20wt.% which was the optimum value for the critical current density. And also 10wt.% Ag was added in the matrix of YBCO, which was nearly about the saturate solubility of silver in textured YBCO. SmBaCuO crystal was grown by the melted-condensed process. A 5${\times}$5${\times}$2㎣ single crystal of SmBaCuO was used to be the seed in the preparation of YBCO. It was proved the orientation of YBCO was the same as the orientation of the SmBaCuO seed. The oxygen absorption of bulk oriented YBCO was studied and the heat treatment of oxygen absorption would be in flowing oxygen, at 400$^{\circ}C$ for about 24 hours. the magnetic hysteresis loops were measured by Vibrating Smaple Magnetometer and the J$\_$c/ was calcuated by means of Bean's model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.351-354
• /
• 1998

The formation of the $YBa_2Cu_30_{7_\delta}$(Y123) thick films has been investigated by a surface diffusion Imcess between $3BaCu0_2$+2CuO composite coating powder and a $Y_2BaCuO_5$(Y211). This reaction has been studied in the temperature of $930^{\circ}C$ and $940^{\circ}C$ for 2h to 10h in an oxygen atmosphere. The Y211 substrates becomes covered by co-precipitation of Y123 grains and CuO inclusions. X-ray diflractotnctn. revealed that the lager consisted of an orthorhombic crystal structure. The maximum Jc of $400A/\textrm{cm}^2$ is abtained when the specimen was heat-treated at $930^{\circ}C$ for 6h on the Y211 substrate.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.211-219
• /
• 2010

This paper designs the dynamic symbol automatic trading system in Korean option market. This system is based on Multichart program which is convenient and efficient system trading tool. But the Multichart has an important restriction which has only one constant symbol per chart. This restriction causes very useful strategies impossible. The proposed design uses global variables, signal chart selection and position order exchange. So an automatic trading system with dynamic symbol works on Multichart program. To verify the proposed system, BS(Buythensell)-SB(Sellthenbuy) strategies are tested which uses the change of open-interest of stock index futures within a day. These strategies buy both call and put option in ATM at start candle and liquidate all at 12 o'clock and then sell both call and put option in ATM at 12 o'clock and also liquidate all at 14:40. From 23 March 2009 to 31 May 2010, 301-trading days, is adopted for experiment. As a result, the average daily profit rate of this simple strategies riches 1.09%. This profit rate is up to eight times of commision price which is 0.15 % per option trade. If the method which raises the profitable rate of wining trade or lower commission than 0.15% is found, these strategies make fascinated lossless trading system which is based on the proposed dynamic symbol automatic trading system.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2002

This study was performed to evaluate an applicability of the SMMCMAS system for reuse of the sewage from spa area and was operated to HLR(Hydraulic loading rate) of 211.3 to 126.8 $\ell$/㎥/d. The operating HRT(Hydraulic retention time) ranges were 2.5 to 1.5 hours. Conclusions are as follows; At the optimum HLR of 158.5 $\ell/\m^2$/d (HRT of 2.0 hours), the maximum BOD removal efficiency was 94% and the effluent BOD concentration was 1.1mg/$\ell$ in result. As the HLR was increased to 211.3 $\ell/\m^2$/d, BOD removal efficiency was decreased to 75% and BOD removal efficiency was also reduced to 74% at lower HLR of 126.8 $\ell/\m^2$/d. It shows that the maximum BOD removal efficiency occurs at an optimum HLR value and that the removal efficiency decreases when the HLR is either higher or lower than the optimum value. Sludge production rates were ranged 0.01 to 0.24gVSS/gBODrem/d and accomplished to 0.01gVSS/gBODrem/d at the optimum HLR of 158.5 $\ell/\m^2$/d.

• Korean Journal of Adult Nursing
• /
• v.16 no.2
• /
• pp.183-190
• /
• 2004

Purpose: The purpose of this study was To exam the skin and pressure sore and To evaluate the predictive validity for the new pressure sores risk assessment scale. Method: There was finally 211 neurosurgery subject admitted in Chung-Ang Univ. Hospital from Nov, 11, 2002 to Feb, 11, 2003. Data was collected three times per week from 48-72hr after admission until incidence of pressure sores or discharge or die. Inclusion criteria were; (1) no pressure sores at admittance, (2) at least 3 times assessment, (3) adults older than 16yrs, (4) patients consent to participate in study. Result: 1. 34 case of 211 developed pressure sores(11.6%). 2. The coccyx area was the most common occurrence site of pressure sores. 3. At the cutoff point 23 of sensitivity 100%, specificity 76.3% was higher in 2003 than specificity 63.8% at the cutoff point 26 of sencitivity 100% in 1991. 4. "Moisture" of subscale for pressure sores risk factor was the strongest predictor. Conclusion: This study shows that the New Pressure Sores Risk Assessment Scale still predict the risk of developing pressure sores in neurosurgical subject.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.211-216
• /
• 2012

Fires are the most common disaster and early fire detection is of great importance to minimize the consequent damage. Simple sensors including smoke detectors are widely used for the purpose but they are able to sense fires only at close proximity. Recently, due to the rapid advances of relevant technologies, vision-based fire sensing has attracted growing attention. In this paper, a novel visual sensing technique to automatically detect fire is presented. The proposed technique consists of multiple steps of image processing: pixel-level, block-level, and frame level. At the first step, fire flame pixel candidates are selected based on their color values in YIQ space from the image of a camera which is installed as a vision sensor at a fire scene. At the second step, the dynamic parts of flames are extracted by comparing two consecutive images. These parts are then represented in regularly divided image blocks to reduce pixel-level detection error and simplify following processing. Finally, the temporal change of the detected blocks is analyzed to confirm the spread of fire. The proposed technique was tested using real fire images and it worked quite reliably.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.85-93
• /
• 2012

We study on the distribution characteristics of antifouling agents such as Sea-nine 211, Irgarol 1051, Diuron using HS-SPME method in southwestern coast of Korea. Short half-life of Sea-nine 211 was distributed in very low concentrations and/or below detection limits in all of the sampling points, both water and sediments samples. Irgarol 1051 was detected to have the highest concentration respectively $6.98{\mu}g/L$, 28.50 ng/g-dry wt in the seawater and sediments, and regional distribution characteristics did not appeared. Strong bioaccumulation and long half-life of Diuron was distributed higher concentration than in all sampling point and was analyzed to have the highest concentration(3882.22 ng/g-dry wt) Mo7(Mokpo)'s sediment. Irgarol 1051 and Diuron distributed in the shipbuilding industry and ship marina are located just at the point to found in high concentrations. In addition, the distribution of the antifouling agent materials were lower in concentration than in inner bay to outter bay in sediments. Antifouling agent materials from these results were contaminated high potential from port and shipbuilding industry located in inner bay.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.211-217
• /
• 2004

The oxidation behaviors of Ti-10Ta-10Nb alloy and Ti-6Al-4V alloy were studied in dry air atmosphere. Specimens were melted in consumable vacuum arc furnace and homogenized at $1050^{\circ}C$ for 24 h. Hot rolling was performed at $1000^{\circ}C$. Specimens of the alloys were oxidized as the temperature range $400~650^{\circ}C$ for 30 min. The oxidation behavior of the alloys was analysed by optical microscope, SEM/EDX, XRD, XPS and TGA. Immersion test was performed in 1% Lactic acid. In the microscope observation, oxide layer of Ti-10Ta-10Nb alloy was denser and thinner than Ti-6Al-4V's. The weight gains during the oxidation rapidly increased at the temperature above $600^{\circ}C$ in Ti-6Al-4V's alloy and$ 700^{\circ}C$ in Ti-10Ta-10Nb alloy. According to XRD results, oxide layers were composed of mostly $TiO_2$(rutile) phase. It was analysed that the passive film of the Ti alloys consisted of $TiO_2$ through X-ray photoelectron spectroscopy(XPS) analysis.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.211-215
• /
• 2017

The individual Maillard reactions of glucose, glucosamine, cyclohexylamine, and benzylamine were studied at a fixed temperature of $120^{\circ}C$ under different durations by monitoring the absorbance of the final products at 425 nm. Glucosamine was the most individually reactive compound, whereas the reactions of glucose, cyclohexylamine, and benzylamine were not significantly different from each other. Maillard reactions of reaction mixtures consisting of glucosaminecyclohexylamine, glucosamine-benzylamine, glucose-cyclohexylamine, and glucose-benzylamine were also studied using different concentration ratios under different durations at a fixed temperature of $120^{\circ}C$ and pH 9. Maillard reactions in the pairs involving glucosamine were observed to be more intense than those of the pairs involving glucose. Finally, with respect to the concentration ratios, it was observed that in most instances, optimal activity was realized, when the reaction mixtures were in the ratio of 1:1.