• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.347-356
• /
• 1992

Various kaolin samples with different alumina content were prepared from calcined admixture of kaolin and ammonium sulfate by varying the treatment time in sulfuric acid. Samples were nitridated under N2 or N2-H2 atmosphere with changing the amount of added carbon, the reaction time and temperature. As the alumina content lowered, the size of kaolin particles decreased and the specific surface area increased. XRD analysis indicated that ${\alpha}$-quartz remained by decomposition of halloysite and meta-halloysite. Experimental results of nitridation behavior are summerized as follows; 1) Nitridation under N2 atmosphere. With the increase of C/SiO2 ratio and with the decrease of Al2O3 content, disappearance of XRD pattern peaks of mullite, ${\alpha}$-quartz and ${\alpha}$-Al2O3 were accelerated at 1300$^{\circ}C$. SiC was the main phase in the reaction product of acid-treated kaolin samples nitridated at 1300$^{\circ}C$ for 10 hours regardless of C/SiO2 ratio. But the XRD peak intensities of ${\beta}$-Si3N4, ${\beta}$-sialon and SiC did not show much difference when untreated raw kaolin was fired at the same condition. When the ratio of C/SiO2 was 3.5, ${\beta}$-sialon and ${\beta}$-Si3N4 existed in the reaction product of about 22% alumina containing kaolin sample fired at 1350$^{\circ}C$ for 7 hours. Only ${\beta}$-sialon existed in the same sample fired at 1400$^{\circ}C$ for 10 hours. ${\beta}$-sialon was obtained from all of the acid-treated kaolin samples fired at 1400$^{\circ}C$ for 40 hours, but AlN and SiC remained in the untreated kaolin sample. Z value of the ${\beta}$-sialon obtained from the 22% alumina containing kaolin sample fired at 1400$^{\circ}C$ for 40 hours was about 1.3(XRD) and 1.5(EDS). 2) Nitridation under 80N2+2OH2 mixed gas atmosphere with the C/SiO2 ratio of 1 Mullite was not found, but ${\alpha}$-Si3N4, and ${\beta}$-sialon were present in the reaction product of about 22% alumina containing kaolin sample fired at 1300$^{\circ}C$ for 10 hours. When untreated kaolin sample was nitridated at the same condition, mullite remained. AlN and SiC were not found in the reaction product of about 22% alumina containing kaolin sample fired at 1350$^{\circ}C$ for 5 hours. On the other hand, AlN and SiC remained in the product of untreated kaolin fired at the same condition.

• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.99-105
• /
• 2018

본 연구에서는 단결정 실리콘 제조수율에 영향을 미치는 것으로 알려진 석영도가니 표면의 불균일한 결정화를 피하기 위해, 결정화촉진제로 Ba이 포함된 코팅용액을 제조하여 분무열분해법으로 코팅 후, 열처리에 따른 석영도가니 표면의 결정화를 조사하였고, 다음과 같은 결과를 얻었다. 코팅하지 않은 도가니의 경우 온도가 상승함에 따라 $1350^{\circ}C$에서부터 결정화가 진행되는 것을 알 수 있었으며, $1450^{\circ}C$가 되어서야 균일하게 결정화가 되는 것을 확인하였으며, 결정상은 ${\beta}$-cristobalite로 확인되었다. Ba이 코팅된 도가니는 $1000^{\circ}C$부터 결정화가 진행되고 $1300^{\circ}C$에서 전체적으로 도가니 표면에 균일하게 결정화가 진행되는 것을 알 수 있었다. Ba이 코팅된 도가니는 결정상으로 ${\alpha}$-cristobalite와 침상 결정의 $BaSi_2O_5$이 생성되었다가 소멸하며, ${\beta}$-cristobalite 상이 최종적으로 균일한 결정상으로 남는 것을 알 수 있다.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.68-72
• /
• 2002

Iodine ($I_2$)을 이용한 기상성장법(chemical vapour transport CVT)으로 상용 FeSi$_2$분말로부터 $\beta$-$FeSi_2$ 및 $\alpha$-$FeSi_2$단결정을 제조하였다 $FeSi_2$ 분말은 iodine과 함게 석영 ampoule에 넣은 후 진공배기하여 two-zone 전기로 내에서 기상성장 시켰다. CVT법에 의한 기상성장시 고온부분의 source측 온도는 $1050^{\circ}C$이었으며 $\beta$-$FeSi_2$와 $\alpha$-$FeSi_2$ 단결정이 얻어지는 성장측 온도는 각각 $750^{\circ}C$ 및 $950^{\circ}C$이었다. 이때 얻어진$\alpha$-$FeSi_2$ 단격정은 $l0\times10 \textrm{mm}^2$크기의 판상결정이었고 orthorhombic 구조의 $\beta$-$FeSi_2$, 단결정은 길이 10mm의 needle형 결정임을 알 수 있었다. $\alpha$-$FeSi_2$ 단결정의 조성을 EPMA로 조사한 결과 Si이 화학양론비보다 많은 $FeSi_{2.58}$ 이었다. CVT법으로 합성된 $\beta$-$FeSi_2$ 격정의 승온에 따른 상의 안정성을 조사한 결과 $930^{\circ}C$ 이상에서 $\alpha$-$FeSi_2$로 상변태함을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.605-608
• /
• 2004

A novel blue-green emitting aluminum complex was developed by employing 8-hydroxyquinoline as co-ligand for enhancement of electron transport and light emission abilities so that the electroluminescent (EL) devices do not need additional electron transport layer. The aluminum complex (PAlQ) of 8-hydroxyquinoline and ${\alpha}$-pyridoin was synthesized The structure of the PAlQ was elucidated by FT-IR, UV-Vis and XPS. The PAlQ complex showed thermal stability up to 350$^{\circ}C$ under nitrogen flow by TGA. The photoluminescence (PL) was measured from solid film of the PAlQ complex on quartz substrate. The EL device was fabricated by the vacuum deposition. The device having the structure of ITO/TPD/PAlQ/Al was studied, where N,N-bis(3-methylphenyl}-N,N'-diphenyl-benzidine (TPD) was used as a hole transporting layer. The EL device emitted a blue-green light.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.958-966
• /
• 2001

This study has examined the microstructural development in the Bridgman type directional solidification of hyper-peritectic Sn-Cd alloys, and the temperature and flow field have been numerically simulated to see if there is any change induced by convection. The directional solidification experiments carried out in quartz tubes with inside diameters of 0.4∼6mm showed that the resulting microstructures are clearly dependent on the size of tube diameters. The bigger ampoules where the effect of convection is highly expected produced saw-like structures resulting from the primary $\alpha$ and peritectic $\beta$ phase growing together at a planar solid-liquid front, with the former being surrounded by the latter. In the smaller ampoules, where the effect of convection is expected low however, the saw structure disappears, and as is understood from the theoretical prediction based on diffusion-controlled solidification the initial growth of the primary $\alpha$ phase is replaced by the nucleation of the peritectic $\beta$ phase whose growth continues to the end of the solidification.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1834-1839
• /
• 2018

A tabletop ultrafast soft x-ray has been generated from the laser-produce plasma with a femtosecond pulsed Ti:Sapphire laser. The estimated total flux of Al $K{\alpha}$ is of $2.2{\times}10^9photons/sec$ in $4{\pi}$ radian and the parameters related to the optical performance were obtained. The tungsten/silicon multilayer, flat quartz and bent thallium acid phthalate (TLAP) crystal were used for monochromatization of soft x-ray to refine the aluminum $K{\alpha}$ radiation and compared the respective value of $E/{\Delta}E$. To estimate the size of the x-ray source beam generated by a fs laser, the approximation using the FWHM obtained from the x-ray beam scan near the focal point was discussed, and the size of the diameter was about $9.76{\mu}m$.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.460-465
• /
• 2007

엔도설판류(${\alpha}$, ${\beta}$, sulfate)를 UV 및 초음파에너지를 조사하여 분해하였다. 물질의 분해과정은 가스크로마토그래프(GC)와 총유기탄소(TOC)를 분석하여 검토되었다. UV 원으로서 low pressure mercury multilamp(8Wx2)와 초음파발생기를 이용하였으며, 초기농도는 10 mg/L로 하였다. 단일성분에서의 실험결과 엔도설판류(${\alpha}$, ${\beta}$, sulfate)의 UV 광분해도는 순서대로 48.2%, 50.0%, 76.5%였으며, 초음파를 이용한 분해에서는 각각 66.9%, 55.8%, 72.7%였다. 3성분 혼합용액에서는 단일성분용액의 분해효율과 달리 엔도설판-sulfate의 분해속도가 급감하여 가장 낮았고 엔도설판 -${\alpha}$, -${\beta}$들은 두드러진 차이를 보이지 않았다. 혼합용액에서 엔도설판-sulfate의 분해속도 감소로부터 엔도설판-${\alpha}$, -${\beta}$와 엔도설판-sulfate 사이의 낮은 평형상수값을 갖는 가역적 반응을 가정할 수 있었다. TOC 분석자료는 엔도설판류의 무기질화가 약 20%~40% 수준으로 진행되었음을 보여주며, 동시에 두 고도처리법이 라디칼분해반응을 유도하면서 상당한 분율의 중간산물을 생성함을 추정할 수 있었다. 또한 엔도설판류의 분해는 유기물 및 TOC 분석자료에 의거하면 모두 겉보기 1차 속도식과 잘 부합되었다.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1103-1109
• /
• 2003

Crystalline carbon nitride films have been deposited by RF reactive magnetron sputtering system with negative DC bias. The carbon nitride films deposited on various substrates showed ${\alpha}$- C$_3$N$_4$,${\beta}$-C$_3$N$_4$ and lonsdaleite structures through XRD and FTIR We can find the grain growth of hexagonal structure from SEMI photographs, which is coincident with the theoretical carbon nitride unit cell. When nitrogen gas ratio is 70 % and RF power is 200 W, the growth rate of carbon nitride film on quartz substrate is about 2.1 $\mu\textrm{m}$/hr.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.241-249
• /
• 1982

Two dinnerware porcelain bodies involving partial replacement of feldspar and kaoline by about 35wt% domestic GYUNGJU-pottery stone were developed and their properties such as shrinkage, porosity, firing range, linear thermal expansion, pyroplastic deformation, degree of whiteness and mechanical strength were compared with those of a traditional clay-flint-feldspar body. The experimental results showed that one of the clay-flint-feldspar-pottery stone body with 1% ZnO addition had the firing range of 115$0^{\circ}C$~121$0^{\circ}C$, whereas the traditional body had the firing range of 12$25^{\circ}C$~129$0^{\circ}C$. The linear drying shrinkage and linear dry-to-fired shrinkage of all bodies were 2.5~4.5% and 15~18%, respectively. And the major crystalline phases of sintered bodies were $\alpha$-quartz and secondary mullite surrounded by glassy phases. The modulus of rutpture of sintered bodies was ranged from 860 to 870kg/$\textrm{cm}^2$, and the microhardness of sintered bodies was 680 kg/$\textrm{cm}^2$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.159-162
• /
• 2000

The purpose of this study is to develope an accurate procedure for measuring the glass content of fly ash produced by bituminous coal to assist in predicting their behavior in concrete. Quantitative mineralogical compositions of fly ashes were obtained by internal standard method using powder X-ray diffraction analysis. In the X-ray diffraction method, the specimen and standard fluorite were cautiously mixed and pulverized to 22$\mu$m in wet process so as to avoid the prefered orientation of the crystal and microabsorption effect of X-ray. calibration curve were fitted for several references peaks of four phases:$\alpha$-quartz. mullite, magnetite, hematite. The amount of glass was calculated by subtracting the amount of crystal phase and loss on ignition from the total amount. Glass content determined with this method ranged from 66.7 to 75.wt%.