• 제목/요약/키워드: $(CH_2CH_2OH)_2NH$

검색결과 94건 처리시간 0.03초

용매와 반송가스가 초음파 분무 열분해에 의한 불소 도핑 이산화 주석 투명전도막의 성장속도와 특성에 미치는 영향 (The Effect of Solvent and Carrier Gas on the Deposition Rate aid the Properties of Pyrosol Deposited $SnO_2$ : F Transparent Conducting Films)

  • 윤경훈;송진수;강기환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.174-177
    • /
    • 1991
  • Fluorine-doped $SnO_2\;(SnO_2:F)$ films were prepared in ordinary atmosphere on borosilicate glass substrates using pyrosol deposition method starting from the solutions composed of $SnCl_4-5H_2O-NH_4F-CH_3OH-H_2O-HCl$ in an attempt to develop transparent conductors for use in amorphous silicon (a-Si) solar cello. The deposition rate of films increased with the increase in the content of $H_2O$, whereas it decreased with increasing the content of $CH_3OH$. When air was used as the carrier gas, the lowest electrical resistivity was obtained from a solution having $CH_3OH/H_2O$ mol ratio of about $2{\sim}3$ in the solution. The use of $N_2$ of the same flow rate as the carrier gab resulted always in the high resistive films, but the resistivity of the films decreased continuously with the increase in the content of $H_2O$. The surface morphology and preferred orientation of films were also affected by the solvent composition and the content of HCl in the solution. The room-temperature resistance of the films were fairly stable after heat-treatments up to $600^{\circ}C$.

  • PDF

유도결합 플라스마-질량분석법에 의한 혈청, 생우유 및 사료첨가제중 요오드의 분석에 관한 연구 (A Study on Determination of Iodine in Serum, Fresh Milk, and Feed Additive by Inductively Coupled Plasma-Mass Spectrometry)

  • 이원;박경수;김선태;김영만
    • 분석과학
    • /
    • 제12권6호
    • /
    • pp.528-533
    • /
    • 1999
  • 유도결합 플라스마-질랑분석법을 이용하여 혈청, 생우유 및 사료첨가제 중 요오드를 정량하였다. 시료를 매트릭스 변형제인 $NH_4OH$(0.5% v/v)+$CH_3OH$(5% v/v) 혼합용액으로 25배 묽힌 다음, m/z=127에서 이온세기를 측정하였다. 이 방법에 대한 요오드의 검정곡선은 $0-100{\mu}g/L$ 범위에서 상관계수($R^2$)가 0.99인 직선관계를 나타내었으며, 검출한계는 $0.084{\mu}g/L$이었다. 최적 분석 및 기기 조건에서 분유 표준시료를 분석한 결과 상대오차는 2.30-4.73% 범위이었다. 또한 혈청, 생우유, 동물의 사료 첨가제 등과 같은 실제시료를 분석한 결과 요오드의 함유량은 각각 $12.4-40.2{\mu}g/L$, < 0.01-3.11 mg/L,< $10^{-7}-2.60g/kg$ 범위이었다.

  • PDF

Scanning Tunneling Microscopy (STM)/Atomic Force Microscopy(AFM) Studies of Silicon Surfaces Treated in Alkaline Solutions of Interest to Semiconductor Processing

  • Park, Jin-Goo
    • 한국표면공학회지
    • /
    • 제28권1호
    • /
    • pp.55-63
    • /
    • 1995
  • Alkaline solutions such as $NH_4$OH, choline and TMAH (($CH_3$)$_4$NOH) have been introduced in semiconductor wet processing of silicon wafers to control ionic and particulate impurities following etching in acidic solutions. These chemicals usually mixed with hydrogen peroxide and/or surfactants to control the etch rate of silicon. The highest etch rate was observed in $NH_4$OH solutions at a pH in alkaline solutions. It indicates that the etch rate depends on the content of $OH^{-}$ as well as cations of alkaline solutions. STM/AFM techniques were used to characterize the effect of alkaline solutions on silicon surface roughness. In SC1 (mixture of $NH_4$OH : $H_2$$O_2$ : $H_2$O) solutions, the reduction of the ammonium hydroxide proportion from 1 to 0.1 decreased the surface roughness ($R_{rms}$) from 6.4 to $0.8\AA$. The addition of $H_2$$O_2$ and surfactants to choline and TMAH reduced the values of $R_{p-v}$ and $R_{rms}$ significantly. $H_2$$_O2$ and surfactants added in alkaline solutions passivate bare silicon surfaces by the oxidation and adsorption, respectively. The passivation of surfaces in alkaline solutions resulted in lower etch rate of silicon thereby provided smoother surfaces.s.ces.s.

  • PDF

IDENTIFICATION AND DETERMINATION OF GINSENG SAPONINS, PROSAPOGENINS AND SAPOGENINS FROM CRUDE DRUG PREPARATIONS FOR QUALITY CONTROL

  • Choi Kang Ju;Ko Sung Ryong;Kim Seok Chang;Kim Man Wook
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1993년도 학술대회지
    • /
    • pp.206-214
    • /
    • 1993
  • Ginseng saponins have been known as main active principles and analyzed as the index components in ginseng and its products for quality control. But it is generally difficult to analyze the saponins in crude drug preparations. Saponins, Prosapogenins and sapogenins of crude drug preparation were identified by TLC and determined quantitatively by HPLC. $Prosapogemins-Rg_3\;-Rg_2\;and\;{\Delta}^{20}-prosapogenin$ were extracted with ethyl acetate from $50\%$ acetic acid hydrolyzates of saponin fractions and identified by TLC with lower phase of $CHCl_3/MeOH/H_2$ O\65:35:10. v/v)on silica gel plate, and quantified by HPLC on $Lichrosorb-NH_2$ column with $CH_3CN/H_2O(90:10,\;v/v).$ Sapogenins. panaxadiol and panaxatriol. were extracted with ethyl ether from $7\%-sulfuric$ acid hydrolyzates of saponin fractions and identified by TLC with chloroform/acetone(1 : 1 v/v) on silica gel plate. and quantified by HPLC on u - Bondapak $C^{18}$ column with $CH_3CN/MeOH/CHCl_3(83:10:7.\;v/v).$ These analyses of prosapogenins and sapogenins are more useful for quality control than those of saponins in crude drug preparations such as So - Shi - Ho - Tang(소시호탕), Sa - Kun - Ja - Tang(사군자탕), Yook - Kun - Ja - Tang(육군자탕), and In - Sam -Tang(인삼탕)

  • PDF

NH4OH 수용액 하에서 Cu 호일의 산화를 통해 합성한 CuO 나노벽의 가스센싱 특성 (Gas sensing properties of CuO nanowalls synthesized via oxidation of Cu foil in aqueous NH4OH)

  • 슈엔하이엔뷔엔;팜티엔헝;풍딘호앗;이시홍;이상욱;이준형;김정주;허영우
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.141-141
    • /
    • 2018
  • Copper is one of the most abundant metals on earth. Its oxide (CuO) is an intrinsically p-type metal-oxide semiconductor with a bandgap ($E_g$) of 1.2-2.0 eV 1. Copper oxide nanomaterials are considered as promising materials for a wide range of applications e.g., lithium ion batteries, dye-sensitized solar cells, photocatalytic hydrogen production, photodetectors, and biogas sensors 2-7. Recently, high-density and uniform CuO nanostructures have been grown on Cu foils in alkaline solutions 3. In 2011, T. Soejima et al. proposed a facile process for the oxidation synthesis of CuO nanobelt arrays using $NH_3-H_2O_2$ aqueous solution 8. In 2017, G. Kaur et al. synthesized CuO nanostructures by treating Cu foils in $NH_4OH$ at room temperature for different treatment times 9. The surface treatment of Cu in alkaline aqueous solutions is a potential method for the mass fabrication of CuO nanostructures with high uniformity and density. It is interesting to compare the gas sensing properties among CuO nanomaterials synthesized by this approach and by others. Nevertheless, none of above studies investigated the gas sensing properties of as-synthesized CuO nanomaterials. In this study, CuO nanowalls versus nanoparticles were synthesized via the oxidation process of Cu foil in NH4OH solution at $50-70^{\circ}C$. The gas sensing properties of the as-prepared CuO nanoplates were examined with $C_2H_5OH$, $CH_3COCH_3$, and $NH_3$ at $200-360^{\circ}C$.

  • PDF

2009~2010년 제주지역 강우의 오염 특성 연구 (Pollution Characteristics of Rainwater at Jeju Island during 2009~2010)

  • 김기주;부준오;김원형;이윤상;현동림;강창희
    • 한국대기환경학회지
    • /
    • 제29권6호
    • /
    • pp.818-829
    • /
    • 2013
  • The collection of rainwater samples was made at Jeju area during 2009~2010, and the major ionic species were analyzed. In the comparison of ion balance, conductivity, and acid fraction for the validation of analytical data, the correlation coefficients showed a good linear relationship within the range of 0.966~0.990. The volume-weighted mean pH and electric conductivity were 4.9 and $17.8{\mu}S/cm$, respectively, at the Jeju area. The volume-weighted mean concentrations of ionic species in rainwater were in the order of $Cl^-$ > $Na^+$ > $nss-SO_4{^{2-}}$ > $NH_4{^+}$ > $NO_3{^-}$ > $Mg^{2+}$ > $H^+$ > $nss-Ca^{2+}$ > $HCOO^-$ > $K^+$ > $PO_4{^{3-}}$ > $CH_3COO^-$ > $NO_2{^-}$ > $F^-$ > $HCO_3{^-}$ > $CH_3SO_3{^-}$. The ionic strength of rainwater was $0.26{\pm}0.21$ mM during the study period. The composition ratios of ionic species were such as 50.1% for the marine sources ($Na^+$, $Mg^{2+}$, $Cl^-$), 30.9% for the anthropogenic sources ($NH_4{^+}$, $nss-SO_4{^{2-}}$, $NO_3{^-}$), and 4.7% for the soil source ($nss-Ca^{2+}$), and 3.1% for organic acids ($HCOO^-$, $CH_3COO^-$). From the seasonal comparison, the concentrations of $NO_3{^-}$, $nss-Ca^{2+}$, and $nss-SO_4{^{2-}}$ increased in winter and spring seasons, indicating a reasonable possibility of long range transport from Asia continent. Especially, the acidifying contributions by major inorganic acids ($nss-SO_4{^{2-}}$ and $NO_3{^-}$) and organic acids ($HCOO^-$ and $CH_3COO^-$) were 87.6% and 12.4%, respectively. In comparison by sectional inflow pathway of air mass during the rainy sampling days, the concentrations of $nss-SO_4{^{2-}}$ and $NO_3{^-}$ were relatively high when the air mass was moved from the China continent into Jeju area.

화합물내에서의 수소원자의 이상적 위치계산 (Calculation of the Ideal Positions of Hydrogen Atoms in Compounds)

  • 서일환;김경한;오미란;박균하;김문집
    • 한국결정학회지
    • /
    • 제8권1호
    • /
    • pp.59-63
    • /
    • 1997
  • 화합물내에 존재하는 다음 7가지 수소원자의 이상적인 위치들의 한가지 계산법을 보였다. (1) 3급 C-H, (2) 2급 C-H, (3) 1급 C-H, (4) 방향환 C-H와 N-H, (5) 수산기 O-H, (6) 말단평면내의 2개의 수소 (7) 선형인 X-C-H를 갖는 아세틸렌 C-H.

  • PDF

ICP를 이용한 MTJ stack 위의 Ta 박막의 식각 특성 연구 (Dry etch of Ta thin film on MTJ stack in inductively coupled plasma)

  • 김동표;우종창;김창일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.29-29
    • /
    • 2009
  • 현재 고집적 비휘발성 메모리 소자로는 MRAM (Magnetic Random Access Memory)과 PRAM (Phase Magnetic Random Access Memory)이 활발하게 미국과 일본, 한국 등에서 다양한 연구가 진행되어 오고 있다. 이 중에서 MRAM은 DRAM과 비슷한 10 ns의 빠른 읽기/쓰기 속도와 비휘발성 특성을 가지고 있으며, 전하를 저장할 커패시터가 필요 없고, 두 개의 자성충에 약 10 mA 정도의 전류를 가하면 그때 발생하는 약 10 Oe의 자장을 개개의 비트를 write하고, read 시에는 각 비트의 자기저항을 측정함으로써 데이터를 저장하고 읽을 있으므로, 고집적화가 가능성하다 [1]. 현재 우수한 박막 재료가 개발 되었으나, 고집적 MRAM 소자의 양산에는 해결 하여야 하는 문제점이 있다. 특히 다층 박막으로 구성되어 있으므로 식각 공정의 개발이 필수적이다. 지금까지 MRAM 재료의 식각은 주로 Ion milling, ICP, ECR등의 플라즈마 장치를 되었고, 식각 가스로는 할로겐 기체와 금속카보닐 형성을 위한 Co/$NH_3$$Ch_3OH$ 기체가 이용되고 있다. 그러나 할로겐 계열의 기체를 사용할 경우, 식각 부산물들의 높은 끓는점 때문에 식각 부산물이 박막의 표면에서 열적 탈착에 의하여 제거되지 않기 때문에 높은 에너지를 가지는 이온의 도움에 의한 식각이 필요하다. 또한 Cl 계열의 기체를 사용할 경우, 식각 공정 후, 시료가 대기에 노출되면 대기 중의 수분과 식각 부산물이 결합하여 부식 현상이 발생하게 된다. 그러므로 이를 방지하기 위한 추가 공정이 요구된다. 최근에는 부식 현상이 없고, MTJ 상부에 사용되는 Ta 또는 Ti Hard mask와의 높은 선택비를 가지는 $CH_3OH$ 또는 CO/$NH_3$가 사용되고 있다. 하부 박막에 따른 식각 특성에 연구와 다층의 박막의 식각 공정에 발생에 관한 발표는 거의 없다. MRAM을 양산에 적용하기 위하여서는 Main etch 공정에서 빠른 식각 공정이 필요하고, Over etch 공정에서 하부박막에 대한 높은 선택비가 요구된다. 그러므로 본 논문에서는 식각 변수에 따른 플라즈마 측정과 표면 반응을 비교하여 각 공정의 식각 메커니즘을 규명하고, Main Etch 공정에서는 $Cl_2$/Ar 또는 $BCl_3$/Ar 가스를 이용하여 식각 실험을 수행하고, Over etch 공정에는 낮은 Ta 박막 식각 속도를 가지는 $Ch_4/O_2$/Ar 또는 $Ch_3OH$/Ar 가스를 이용하고자 한다. 플라즈마 내의 식각종과 Ta 박막과의 반응을 XPS와 AES를 이용하여 분석하고, 식각 공정 변수에 따른 식각 속도, 식각 선택비와 식각 프로파일 변화를 SEM을 이용하여 관찰한다.

  • PDF

공중화장실 복합악취 및 개선에 관한 연구 (대전광역시 동구) (A Study about Improvement of Multiple Odor of Public Toilet (Dong-gu, Daejeon))

  • 조수준;신재영;오상수;유대영;이성재
    • 대한환경공학회지
    • /
    • 제37권4호
    • /
    • pp.240-245
    • /
    • 2015
  • 본 연구에서는 대전광역시 동구를 중심으로 공중화장실에 대하여 악취강도를 공기희석관능법과 기기분석을 통하여 공중화장실관리 및 악취저감대책 수립에 기초자료로 제공하고자 하였다. 악취희석배수는 소변기실에서 10~669, 대변기실에서는 31~464까지 다양하게 나타났다. 한편 민원이 발생할 수 있는 악취강도 2.5도 이상의 악취가 발생하는 곳은 6개소(33%)로 조사되었다. 수세식 발효식 재래식처리방식의 대변기실과 설치년도에 따라 악취강도는 차이가 있으나, 화장실 면적은 차이가 없다. 악취원인물질 확인을 위한 6개 공중화장실을 대상으로 기기분석결과 NH3 최대농도는 2.04 ppm, 평균농도는 0.67 ppm이며, $H_2S$, $CH_3SH$, $(CH_3)_3N$는 검출되지 않았다. 발효식과 재래식공중화장실에는 비누, 방향제, 쓰레기통이 없었다. 화장지는 수세식 화장실의 50%에만 있었다.

Kinetics and Mechanism of the Addition of Benzylamines to α-Cyano-β-phenylacrylamides in Acetonitrile

  • Oh, Hyuck-Keun;Ku, Myoung-Hwa;Lee, Hai-Whang
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권6호
    • /
    • pp.935-938
    • /
    • 2005
  • Nucleophilic addition reactions of benzylamines (BA; $XC_6H_4CH_2NH_2$) to $\alpha-cyano-\beta$-phenylacrylamides (CPA; $YC_6H_4CH=C(CN)CONH_2$) have been investigated in acetonitrile at 25.0 ${^{\circ}C}$. The rate is first order with respect to BA and CPA and no base catalysis is observed. The addition of BA to CPA occurs in a single step in which the addition of BA to $C_{\beta}$ of CPA and proton transfer from BA to $C_{\alpha}$ of CPA take place concurrently with a four-membered cyclic transition state structure. The magnitude of the Hammett ($\rho_X$) and Bronsted ($\beta_X$) coefficients are rather small suggesting an early tansition state (TS). The sign and magnitude of the crossinteraction constant, $\rho_XY$ (= −D0.26), is comparable to those found in the normal bond formation processes in the $S_N2$ and addition reactions. The normal kinetic isotope effect ($k_H/k_D\;{\gt}$ 1.0) and relatively low ${\Delta}H^{\neq}$ and large negative ${\Delta}S^{\neq}$ values are also consistent with the mechanism proposed.