한국기술사회와 일본기술사회가 자매결연을 맺은지 30여 년이 지나고 있다. 그 동안 상호간의 정보교환으로 도움을 받고 또 주고 있는 가운데 격년별로 양국간을 왕래하면서 개최되는 한일 Symposium은 해를 거듭할수록 좋은 결실을 맺고 있다. 따라서 한국기술사회가 主管하고 있는 FEISEAP 관계를 일본에서는 어떻게 대처하고 있으며 일본기술사회에서 주관하고 있는 APEC HRD 관계는 어떻게 하고 있는지, 상호협조에 대한 협의사항과 일본기술사회의 기술사 자격시험운영실태 등에 대하여 간추려보고자 한다.

A Study of Improvement in Reactor Thermal Power Measurement Method using Kalman Filter. The objectives of the safety analysis of nuclear power plants are to maintain the surface temperature of fuel and fuel cladding within limit value in case of Loss of Coolant accident (LOCA) so that it ensures the safety and reliability of nuclear power plants. The new technique evaluating the reactor power and improvement of existing plant system increase the safety margin of nuclear power plant operation, and accordingly, economic effect will be anticipated. Hereby, 1 would like to introduce reactor power measurement method using Kalman filter that enables to calculate the reactor power more precisely combining the parameters, for example, turbine output as the 1 st stage pressure of high pressure turbine, and reactor power using energy equilibrium relation. It is expected that the new technique will enhance the accuracy of measurement of reactor power and maintain the reliability of nuclear power operation by increasing operational safety margin, and gain the economic benefit

This study analyze industrial safety and health planning report for manufacture. The purpose of accident analysis is to obtain accurate and objective information about the causes of accidents in order to prevent accidents from reoccurring. This study investigated the causes and conditions of occupational accidents in Korean industry. As the most accidents are occurred in lifting material, the questionnaire analyses about injuries are operated for occur to deal with the Manual Materials Handing. The results show that there are some characteristics in the accidents of Korean industry since 1986: (1) accidents rates tend to have lower since 1983(1994-1.18%, 1995-0.99%, 1996-0.88%), (2) larger companies tend to have lower accident rates than the smaller ones, (3) inexperience is related to high accident rates(1995-51.26%, 1996-48.82%1, because of the careless education for freshman such as OJT which in order to prevent accident, and (4) the body sites most vulnerable to injury are the hands and fingers and increased the back(caused of Back pain). The results of questionnaire analysis show that operator(n= 104) interested in reinforce the back & belly(42.86%). These finding identified in this study can be used to prevent the industrial accidents, and used to improving directions based on analyzed result.