Despite the high cost of memory and CPU time required to resolve the boundary layer, a viscous unstructured grid solver has many advantages over a structured grid solver such as the convenience in automated grid generation and vortex capturing by solution adaption. In present study, an unstructured Cartesian grid solver is developed on the basis of the existing Euler solver, NASCART-GT. Instead of cut-cell approach, immersed boundary approach is applied with ghost cell boundary condition, which can be easily applied to a moving grid solver. The standard $k-{\varepsilon}$ model by Launder and Spalding is employed for the turbulence modeling, and a new wall function approach is devised for the unstructured Cartesian grid solver. Developed approach is validated and the efficiency of the developed boundary condition is tested in 2-D flow field around a flat plate, NACA0012 airfoil, and axisymmetric hemispheroid.

Spar platforms have been installed as a competitive alternative offshore production structure for deepwater oil field. Since the first spar platform was constructed, its configuration has evolved to the so-called the truss spar and then the cell spar. This paper describes the dynamic analysis and fatigue life assessment of steel catenary riser (SCR) connected to cell spar platform. Two different cell spar platforms are considered herein; the original cell spar and the modified one. The original cell spar was modified by introducing an additional damping plate at its bottom in order to reduce wave-frequency motions. Firstly the wave-frequency motions of cell spar platforms are calculated based on the potential theory. Then, the dynamic responses of SCR induced by platform motions are computed. Finally the fatigue life of SCR is estimated by spectral method and the performance of two spar platforms are compared in terms of the fatigue life. Through the present study, it is found that the fatigue life of the modified cell spar increases only slightly.

The static stability of a high-speed hovercraft is estimated by model tests, simplified restoring moment equations and CFD. Well-known methods to increase the stability of hovercrafts are introduced. Roll and pitch moments of a scaled model with a skirt system are measured over inclination angles. The tests are performed on cushion at zero speed both on-land and over-water. To predict the static stability performance, simple restoring moment equations and CFD approach are introduced. Both shows a quantitative difference from the model test results, however, could be used as a design tool for relative comparison prior to model tests.

The train ferry, accommodating trains roll on and off, is often called as 'Railway on the Sea' or 'Blue High-way' since she can connect the railways or roads segregated by the sea and improve the accessibility and continuity of land transport systems. The ferry is especially appropriate to the intermodal transport routes mostly passing through the land but have relatively short sea segment. As the train ferry can considerably reduce the cost and time for cargo handling and modal shift and unnecessitates excessive initial investment on infrastructures such as large harbor cranes or vast container yards, introduction of train Ro-Ro ferries lessen the total transport cost for door-to-door transportation with full exploitation of the existing railway system. All the ports placed in Shandong, Liaoning and Jiangsu provinces of China are connected to the hinterlands via well developed railway and road systems. Therefore, realization of the Incheon-Yantai train ferry system will link Korea railways to TCR and the 4,131-kilometer-long Longhai-Lanxin Railway, along the famous Eurasian Continental Bridge. In the present paper, the Incheon-Yantai train ferry will be introduced as a good example of an efficient multimodal short sea shipping system for Northeast Asia.