Perceiving the depth of space in the spatial organization of architecture is perceiving spaces as well three dimensions as the fourth dimensions -perceive the time-. Physical depth in architectural space differs from perceptional depth in aspects of not only dimension but also perceptional effects. In this study, the perceptional depth is defined as visual depth and physical depth is depth of space. These purposes of this study are classifying the perceptional effects of visual depth -visual access, sense of variety, dynamic and cubic effect... - and the methods of spatial composition which causes visual depth in architectural space.

The purpose of this study is to find out organizing strategy of de-composition works in modern plastic arts. Through investigating the development process of De Stijl painters and Rietveld's early works and analyzing the composition and disposition type of elements such as point, line, plane, color in the selected works, we can draw some conclusions. First, Rietveld pursues the dissolution of traditional volume and the de-composition of elements as Mondrian does through crossing-connection of three listels with quadrangular section. Second, Rietveld reorganized de-composition elements with detached lines and color planes. Third, Rietveld experimented possibility of new plastic space through displacing elements, opening space, making anti-gravity space.

The purpose of this study was to analyze basic conditions for the demand estimation erection of lifetime sports facilities. This is described the whole concept of lifetime sports(sport for all) for helping the understanding of its concept correctly. Firstly, second chapter was examined the significance, function and role of lifetime sports in modern society. Secondly, third and forth chapter was examined demand and participation of lifetime sports activities for demand estimation of lifetime sports facilities. Participation rate is on the rise by the increase in income and leisure time to some extent, but after that it stops rising. In other words, the same participation rate persists without additional increase in participation by the changes in time deepening and in the patterns of demand for lifetime sports activities.

In spite of The exterior design of buildings has a remarkably significant value in terms of public aspect some exposed architectural equipments spoil the appearance of building. The design elements of exposed architectural equipments were partially changed and assessed in the semantic differential method. Thus the aesthetically favorable impression and values of public interest were able to be increased. The reasons why those hideous exposed architectural equipments were constructed, seemed to be as follows; the builders' selfishness, the citizens' ignorance and the immature social institutions that cannot restrict undesirable design efforts. Building equipments located outside are not classified as major elements in building regulations and thus can be installed and altered without any limitations even though they have great effects on the shape and colors of a building. So we have more interest in exposed architectural equipments and more deliberation of exterior design of a building.

The articles on building height limitation are very important to form buildings to be. The application of the articles is based on the surface of the building site ground, that is, the definite judgment of ground level should ensure the correctness of building height limitation. This study surveyed the recognition degree of practitioners about the building height limitation regulations by questionnaires, and analyzed its results and compared them to related building laws and letter of reply from the office to practitioners' inquiry on related regulation. The study summarized the results as follows; 1. It is not clear to judge the ground level. Especially in cases of pilotis structure, there would be various interpretations to define its ground level. 2. According to present building regulations, the site would be confused to define by practitioners whether it is stiff or plain. 3. In case of regulation of a right to enjoy sunshine, it is hard to calculate the average horizontal level(ground level) with neighboring sites. 4. If there were a manual with illustrations for judging and calculating the ground level of various cases, civil petitions would be reduced.

The height provisions, by the urban planning, describe the hightest height per width division, also define oblique line limitation by road without mentioning the highest per width division. Therefore this study will be a basic model for the standard of measuring the highest height per width division analysizing the propriety of current standard of oblique limitation. This technique is prepared to prevent the confusion and to complements the existing planning method. Therefore, it takes more time to establish this new method and to apply it to the existing condition. This study reviewed density control in District Units Plan, based on the guidelines of density, which included height, ratio of total floor to ground area, and land distribution. This study aims to provide efficient analysis by using current oblique limitation provisions Thus, proving the area rations of general residential areas are decreasing. Since the purpose of the District Units Plan is to avoid confusion and help ease the existing problematic conditions which have risen from the two above-mentioned conventional systems, further observation and research on these areas are necessary.

The interest about noise and vibration is increasing by a living level elevation recently. Particularly, the interest about the influence that vibration of machine has on the safety of building is rising. However, there are a lot of the cases that the influence of machine isn't considered in designing the factory buildings. The purpose of this study is to suggest the results of measuring that the influence of machine's vibration in A factory has on the building structure.

The death from suffocation due to the gas from various disaster is frequent very and it occurs. Specially only from the company which treats the gas and only the enterprise which maintains the gas the many greeting accident occurs. Also accidents could occur when working around the toxic gas without one's noticing Therefore a development of the portable gas ditectoror is very essential. Specially with development of design and the new product of the electric chemical sensor might help reducing the many accidents. From the side which protects a worker's life, it isn't just simple equipment but also it must be connected directly to life saving is very important. Therefore, the key technical contents of development must be focused on sensor which is simple and easy to carry and able to detect varieties of toxic gas. So, this study is about the product design which is simple and easy to carry and to use.