DOI QR코드

DOI QR Code

Characteristics of Accidents Distribution in General Polymers Manufacturing Processes

범용 고분자 제조공정의 재해분포 특성

  • Received : 2018.10.02
  • Accepted : 2019.02.19
  • Published : 2019.02.28

Abstract

A variety of general purpose polymer products such as polyethylene (PE), polypropylene (PVC), polyvinyl chloride (PVC), polystyrene (PS) and polyurethane (PU) are widely produced and used in the industrial field. Many industrial accidents have occurred due to fire and explosion at the manufacturing site. In order to prevent such accidents, it is important to collect and analyze accident cases that occurred in the past to identify the characteristics of accidents and to use them to prevent the same kind of accidents or similar accidents. In this study, the accident distribution characteristics of general polymer manufacturing process were examined by using SPSS based on the database of the industrial accident statistics system operated by the Korea Occupational Safety and Health Agency. These results can be used to prevent accidents in the general-purpose polymer product process and ensure the safety of the process.

산업현장에서는 폴리에틸렌(PE), 폴리프로필렌(PP), 폴리염화비닐(PVC), 폴리스테렌(PS) 및 폴리우레탄(PU)과 같은 다양한 종류의 범용 고분자 제품들이 광범위하게 제조 사용되고 있으며, 이들 제조현장에서는 화재 폭발 등으로 인해 산업재해가 많이 발생하고 있다. 이러한 사고를 예방하기 위해서는 과거에 발생한 사고사례를 수집 분석하여 사고특성 등을 파악하여 동종 혹은 유사사고 예방에 활용하는 것이 중요하다. 본 연구에서는 안전보건공단에서 운영하고 있는 산업재해통계시스템의 데이터베이스를 기초로 하여 SPSS를 활용하여 범용 고분자 제조공정별 재해분포 특성을 고찰하였다. 이들 결과는 범용 고분자 제조공정의 사고를 방지하고, 공정의 안전성을 확보하는데 활용하고자 한다.

Keywords

GSGSBE_2019_v23n1_47_f0001.png 이미지

Fig. 1. Accident occurrence-distributions of polymer by year.

GSGSBE_2019_v23n1_47_f0002.png 이미지

Fig. 2. Accident distributions in polymer manufacture process.

GSGSBE_2019_v23n1_47_f0003.png 이미지

Fig. 3. Accident distributions by accident patterns in polymer manufacture process.

GSGSBE_2019_v23n1_47_f0004.png 이미지

Fig. 4. Accident distributions by accident causes in polymer manufacture process.

GSGSBE_2019_v23n1_47_f0005.png 이미지

Fig. 5. Accident distributions by accident victims in polymer manufacture process.

GSGSBE_2019_v23n1_47_f0006.png 이미지

Fig. 6. Accident distributions by business sizes in polymer manufacture process.

References

  1. Han, Ou-Sup and Lee, Jung-Suk, "Pyrolysis Characteristic and Ignition Energy of High-Density Polyethylene Powder", KIGAS, 18(3), 31-37, (2014)
  2. Lee, Keun-Won, "A Study on the Characteristics of Fire Hazard for Plastic Materials", 2003-84-591, Occupational Safety & Health Research Institute, (2003)
  3. Lee, Keun-Won, "Incident Cause Analysis Based on Major Accident Database", 2005-15-33, Occupational Safety & Health Research Institute, (2005)
  4. Cho, Myung-woo, "A Study on the Types of Fetal and Nonfatal Occupational Injuries and Hazardous Risk Factors", 2007-42-837, Occupational Safety & Health Research Institute, (2007)
  5. Lee, Keun-Won and Kim, Kwan-Eung, "Fire Characteristics of Plastic Insulating Materials from Cone Calorimeter Test", T. of Korean Institute of Fire Sci. & Eng., 17(1), 76-83, (2003)
  6. Jeong, Jee-Yeon, "Studies on the Actual Emitting Conditions of Hazardous Substances and the Improvement of Working Environment in Polymer Manufacturing Processes", 2007-108-1033, Occupational Safety & Health Research Institute, (2007)
  7. Hwang, Dong-Jun, "Distribution Characteristics of Accidents Caused During the Manufacturing Processes of Major General Purpose Polymers, and Plans to Seure Safety in the Manufacturing process", Master's Thesis, Pusan National University, (2017)