Abstract
Steel beams with corrugated web have been widely used in the steel structures. However, it is challenging to weld the section between the corrugated web and the flange straight, which increases the cost of production. In order to solve this issue, steel beam with intaglio and embossed web (It is called an IEB) was invented. A web with embossment is produced by cold pressing and welded to flange by automatic welding machine. The loading tests were conducted to investigate the load-carrying capacity of IEB, and its test result was compared with that of H-shaped beam having a same size of flange and web. The test results of IEB series showed about 40% higher load capacities than H-shaped series. As a result of comparing the IEB specimen with Eurocodes for steel beams with corrugated web, all of specimens tested in this study did not meet the design value. Therefore, it is difficult to apply existing formula to IEB and new design formula should be presented for field application.
주름웨브는 강구조물에서 세장해진 웨브의 대안으로 널리 사용되고 있으나 주름진 웨브와 플랜지 사이의 용접은 제작비용의 상승이라는 문제점을 안고 있다. 이러한 경제적인 문제점을 해결하기 위해, 엠보싱웨브를 가지는 보(이하, 엠보싱웨브 보)를 개발하게 되었다. 엠보싱웨브는 냉간프레스 가공에 의하여 형성되고, 웨브와 플랜지는 기계화자동용접에 의하여 접합된다. 엠보싱웨브 보의 구조적 성능을 확인하기 위해, 동일한 크기의 일반 H-형강 실험체도 제작되었고 가력실험이 수행되었다. 실험에 의하여 엠보싱웨브 보 실험체는 H-형강 실험체에 비하여 강도면에서 약 40%정도의 높은 성능을 보였다. 엠보싱웨브 보와 주름웨브 보의 형상은 다르지만, Eurocodes의 주름웨브보 설계식을 이용하여 엠보싱웨브 보의 내력을 예측한 결과 실험결과값과는 상이한 결과를 보였다. 따라서 기존 Eurocodes를 엠보싱웨브보에 적용하는 것은 무리가 있으므로 엠보싱웨브 보의 현장사용을 위해서는 적절한 설계식이 제안되어야 할 것으로 판단한다.