Abstract
The live load effect of KL-510 of the current Korean bridge design code is examined by comparing with that of the multiple trucks of which the weights are statistically estimated from measured traffic data as well as with those of the related live load models. The truck weight data measured on the expressway before and after overweight enforcement are used to obtain the truck weights following the same procedures in deciding the live load model of the design codes and the results are compared with the load effect of KL-510. KL-510 yields a very uniform loading effect compared with the multiple truck effects when the weights are estimated from the data which contains some of the heavy trucks over the operational weight limit. KL-510 yields consistent results with the live load of AASHTO LRFD and shows less variation than the past load model DB-24 over the span lengths considered in this study. As a result of this research, the actual truck combinations equivalent to the notional KL-510 load model are constructed and it can be applied to the evaluation of the existing bridge and the calibration of the load factor of the permit vehicle.
현행 국내 교량 설계기준의 활하중 모형인 KL-510의 하중 효과를 실측된 통행자료로부터 통계적으로 추정한 트럭의 연행효과 및 국내외 관련 설계기준이 하중모형과 비교한다. 과적단속 전후에 고속도로에서 측정된 트럭의 중량 자료를 이용하여 설계기준의 활하중 모형 결정과 동일한 과정을 따라서 트럭 중량을 산정하여 그 하중효과를 KL-510과 비교하였다. KL-510은 운행제한중량을 초과하는 트럭을 일부 포함하는 자료로부터 추정한 트럭의 연행에 의한 하중효과와 매우 부합하는 결과를 보였다. KL-510은 미국 AASHTO LRFD의 활하중 모형과 일관성 있는 결과를 주며, 기존 하중 모형인 DB-24보다 하중효과의 비율이 균일하였다. 이 연구의 결과로 가상의 하중 모형인 KL-510에 해당하는 실제 트럭의 조합을 구성하였으며, 향후 공용중인 교량의 평가와 허가차량의 하중계수 보정에 적용할 수 있다.