에너지공학 (Journal of Energy Engineering)

  • 제23권3호
  • /
  • Pages.211-220
  • /
  • 2014
  • /
  • 1598-7981(pISSN)
  • /
  • 2713-7074(eISSN)
한국에너지학회 (The Korean Society for Energy)
권호 표지
DOI QR코드

DOI QR Code

목재펠릿 연소 시 발생하는 타르, 재, 클링커 생성 특성 분석 및 함수율 변화에 따른 목재펠릿보일러의 성능 연구

The Formation Characteristics of Tar, Ash and Clinker due to Combustion of Wood Pellet and Performance Analysis of Wood Pellet Boiler in terms of the Moisture Contents Change of the Wood Pellet

  • 어승희 (강원대학교 바이오시스템공학과) ;
  • 오광철 (강원대학교 바이오시스템공학과) ;
  • 오재헌 (국립산림과학원 산림생산기술연구소) ;
  • 김대현 (강원대학교 바이오시스템공학과)
  • Euh, Seung Hee (Department of Biosystems Engineering, Kangwon National University) ;
  • Oh, Kwang Cheol (Department of Biosystems Engineering, Kangwon National University) ;
  • Oh, Jae Heun (Forest Practice Research Center, Korea Forest Research Institute) ;
  • Kim, Dae Hyun (Department of Biosystems Engineering, Kangwon National University)
  • 투고 : 2014.03.11
  • 심사 : 2014.09.05
  • 발행 : 2014.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 목재펠릿의 연소 시 발생되는 타르, 재, 클링커의 생성 특성 분석과 더불어, 1등급 목재펠릿의 함수율에 따른 목재펠릿보일러의 성능 분석이 수행되었다. 타르는 목재펠릿이 연소됨에 따라 생성되어 연소실 전열면에 부착되었고, 전열면에 부착되거나 배기가스와 함께 배출되지 못한 재의 경우, 바닥면에 축적되었으며, 클링커는 3등급 목재펠릿의 연소 중에 버너부에서 생성, 고형화되는 것으로 나타났다. 목재펠릿의 등급이 결정되는 요인으로써 함수율은 중요한 요인으로 작용된다. 벌채부산물을 이용한 목재펠릿은 불균일한 함수율로 인해, 연소 생성물의 발생량이 증가되는 경향을 나타내었으며, 이에 따른 연소시스템에서의 효율 저하, 시스템 작동 오류 등의 문제점이 발생되었다. 특히, 목재펠릿의 함수율에 따른 목재펠릿보일러의 성능 분석에서, 1등급 목재펠릿의 함수율이 6.6%p 증가하였을 때, 보일러효율이 약 27.08%p 감소되는 것으로 나타났다.

This study reports the formation characteristics of tar, ash and clinker due to a wood pellet grade and the performance analysis of wood pellet boiler in terms of the moisture contents change of the wood pellet. Tar was accumulated on the heating surface according to combustion of wood pellet, the ash was yielded on the floor of combustion chamber in a wood pellet boiler and the clinker was solidified at the burner due to combustion of the 3rd grade wood pellet. Especially, the moisture contents is important factor to define the grade. Wood of logging residues has a non-uniform moisture contents after the field process, yields of tar, ash and clinker are increased in case of combustion due to the high ash contents. For these reasons, emission of harmful compounds in the exhaust gas, decrease of boiler efficiency and the system operating errors are observed. In the performance analysis of wood pellet boiler in terms of the moisture contents change of the 1st grade wood pellet, the boiler efficiency was reduced by 27.08% with 6.6% moisture contents increase. The optimum moisture contents of wood pellet is needed to improve the boiler performance and efficiency.

키워드

과제정보

연구 과제 주관 기관 : 국립산림과학원, 강원대학교

참고문헌

  1. Lee, J. I., Kim, H. J., So, H. J., "A Study on the Energy Utilization of Woody Biomass," Gyeonggi Research Institute, 2009.
  2. Ahn, J., Kim, J. J., Park, B. S., "Combustion and Heat Transfer Characteristics inside the Combustion Chamber of a Wood Pellet Boiler," The Society of Air-Conditioning and Refrigerating Engineers of Korea, Winter Conference, 2011, pp. 363-366.
  3. Kang, S. B., Kim, H. J., Kim, J. J., Park, H. C., Choi, K. S., "Performance Characteristics of Domestic Wood Pellet Boilers," The Society of Air-Conditioning and Refrigerating Engineers of Korea, Summer Conference, 2011, pp. 900-903.
  4. Byun, Y. C., Kim, E. K., Park, S. H., Hwang, J. H., Lee, J. M., Kim, J. S., "Study of Nozzle Characteristics on Clinker Formation in a CFBC Boiler with CFD Calculation," The Korea Society for Energy Engineering, 2002, Vol. 11, No. 3, pp. 224-229.
  5. Kang, S. B., Kim, J. J., Choi, K. S., Park, J. W., Sim, B. S., Oh, H. Y., "A Study on Production of Clinker, Byproduct of Combustion in a Domestic Wood Pellet Boiler Burner," The Korea Society for Energy Engineering, Spring Conference, 2012, pp. 78.
  6. Moon, J. H., Lee, U. D., Ryu, C. K., Lee, Y. M., Bae, W. K., "Characteristics of Tar Generation during the interval of Gasification of Woodchip," The Korean Society of Combustion, 2011, Vol. 16, No. 1, pp. 8-14.
  7. Sim, B. S., Kim, H. J., Park, H. C., Kim, J. J., Choi, K. S., Kang, S. B., "Combustion Characteristics of a Wood Pellet," The Korean Society of Mechanical Engineers, Spring Conference, 2012, pp. 276-278.
  8. Sim, B. S., Kim, J. J., Choi, K. S., Kang, S. B., Mun, J. S., Oh, H. Y., "Performance Characteristics of Wood Pellet Combustion Facilities 200,000 kcal/h-class," The Korean Society of Mechanical Engineers, Spring Conference, 2012, pp. 276-278.
  9. Euh, S. H., Oh, J. H., Ju, Y. M., Huh, J. N., Kim, D. H., "A Thermal Flow Analysis of Tar Scaled Heating Surface in a Pellet Boiler Using CFD," Korean Society for Agricultural Machinery, Spring Conference, 2013, pp. 95-96.
  10. Yoon, S. J., Son, Y. I., Kim, Y. K., Lee, J. G., "Removal of Tar and Soot in the Syngas Produced from Gasification of Wood Chip by using Catalytic Reformer," The Korean Hydrogen and New Energy Society, 2009, Vol. 20, No. 6, pp. 519-525.
  11. Eum, P. R. B., Lee, Y. W., Ryu, C. K., Park, Y. K., "Experimental Study on Thermal Cracking of Tar and Effect of Char in Biomass Gasification," The 43th KOSCO SYMPOSIUM, 2011, pp. 211-214.
  12. Persson Tomas, Fiedler Frank, Nordlander Svante, Bales Chris, Paavilainen Jane, "Validation of a dynamic model for wood pellet boilers and stoves," Applied Energy, 2009, Vol. 86, No. 5, pp. 645-656. https://doi.org/10.1016/j.apenergy.2008.07.004
  13. Frank Fiedler and Tomas Persson, "Carbon Monoxide Emissions of Combined Pellet and Solar Heating Systems," Applied Energy, 2009, Vol. 86, pp. 135-143. https://doi.org/10.1016/j.apenergy.2008.05.008
  14. Robrto Coll, Joan Salvado, Xavier Farriol, Daniel Montane, "Steam Reforming Model Compounds of Biomass Gasification: Conversion at Different Operating Conditions and Tendency towards Coke Formation," Fuel Processing Technology, 2001, Vol. 74, pp. 19-31. https://doi.org/10.1016/S0378-3820(01)00214-4
  15. El-Rub, Z. Abu, Bramer, E. A., Brem, G., "Review of Catalysts for Tar Elimination in Biomass Gasification Process," Laboratory of Thermal Engineering, 2004, Vol. 43, No. 22, pp. 6911-6919.
  16. Ender Ozden, Ilker Tari, "Shell Side CFD Analysis of a Small Shell-and-tube Heat Exchanger," Energy Conversion and Management, 2010, Vol. 51, pp. 1004-1014. https://doi.org/10.1016/j.enconman.2009.12.003
  17. Joel Chaney, Hao Liu, Jinxing Li, "An Overview of CFD Modelling of Small-scale Fixed-bed Biomass Pellet Boilers with Preliminary Results from a Simplified Approach," Energy Conversion and Management, 2012, Vol. 63, pp. 149-156. https://doi.org/10.1016/j.enconman.2012.01.036
  18. Mohammad Davood Ahanj, Masoud Rahimi, Ammar Abdulaziz Alsairafi, "CFD Modeling of a Radiant Tube Heater," International Communications in Heat and Mass Transfer, 2012, Vol. 39, pp. 432-438. https://doi.org/10.1016/j.icheatmasstransfer.2012.01.011