• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.13-14
• /
• 2003

Burgess?s concentric zone model is a famous theory in the geography of city. However, the zone border line drawing method was uncertain. We have developed the method of drawing the border using land use images.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.206-212
• /
• 2004

To provide guidelines and a basic understanding of static and continuous zone drawing processes, we propose two different mathematical models in terms of the processing conditions and material parameters. Although the models are not finely tuned, because of assumptions made, they are still useful for the analysis of the process and for predicting the processibility.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.521-522
• /
• 2008

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.3
• /
• pp.51-60
• /
• 2007

In terms of the indicators by the type for the landscape plan per the district nit, geographic ecology indicators were the items such as water, water system, topography and climate, while biological ecology indicators were the items such as green zone size, green zone ratio, biotope size and distribution. The sensory and visual indicators were the items such as view point, view axis and skyline, and the accessibility indicator items for the green zone were applied as the socially used indicators. As for the application method according to each indicator, the water or water system was expressed and applied through the slopes and elevation topographic analysis drawings, the climate was expressed and applied through the main direction of the wind and the cold wind pass alley drawings. As for the green zone size and green zone ratio, the land use according to the status and housing area development was compared to present the measured figures. In case of the biotop size and the distribution item, the range was limited to the preparation of the biotope drawings for the focused preservation. As for the view point and view axis, the view point was selected according to the view point to prepare and apply the view analysis drawing in which the view area to be preserved is analyzed. As for the skyline, its landscape photo was composed with the housing area shape, and then skyline photography was applied as the plan in order to propose and consider the various shapes of the skyline. As for the accessibility to the peen zone, the network drawing was drawn to reflect the users' accessibility and continuity of the green zone formed and preserved according to the land use plan and then the drawing was prepared and proposed as the applicable plan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.821-825
• /
• 2000

Drawing is one of the oldest metal forming operations and has major industrial significance. This process allows excellent surface finishes and closely controlled dimensions to be obtained in long products that have constant cross sections. In drawing of the high carbon steel wire, exit speeds of several hundreds meters per minute are very common. Drawing is usually conducted at room temperature using a number of passes or reductions through consequently located dies. In multi-stage drawing process like this, temperature rise in each pass affects the mechanical properties of final product such as bend, twist and tensile strength. In this paper, therefore, to estimate the wire temperature in multi-stage wire drawing process, wire temperature prediction method was mathematically proposed. Using this method, temperature rise at deformation zone as well as temperature drop between die exit and the next die inlet were calculated.

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.114-115
• /
• 1995

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.107-107
• /
• 1995

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.340-347
• /
• 2015

Multi-pass shape drawing is used to manufacture long products of arbitrary cross-sectional shapes. This process allows smooth surface finishes and closely controlled dimensions of the cross-sectional shape. Tube shape drawing for hollow type products provides material savings and weight reduction. The intermediate die shapes are very important in multi-pass tube shape drawing. In the current paper, the design method for the intermediate dies in a tube shape drawing process is developed using a die offset for corner filling (DOCF) method. Underfill defects are related to the radial velocity distribution of each divided section in the deformation zone. The developed intermediate die shape design was applied to the two-pass tube shape drawing with fixed mandrel for manufacturing a hollow linear motion (LM) guide rail. The proposed design method led to uniform and steady metal flow at each divided section. FE-simulations and experiments were conducted to validate the effectiveness of the proposed method in multi-pass tube shape drawing process.