Browse > Article
http://dx.doi.org/10.3795/KSME-A.2008.32.6.519

An Experimental Study on Fatigue Behavior in Welded SM45C Steel Rod  

Lee, Yong-Bok (홍익대학교 기계시스템지다인공학과)
Jung, Jae-Keun (홍익대학교 대학원 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.32, no.6, 2008 , pp. 519-525 More about this Journal
Abstract
For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.
Keywords
Fatigue Strength; Infinite Life; Deposited Metal Zone; Heat Affected Zone; Base Metal Zone; Compressive Residual Stress; Drawing Process; Alternating Stress;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Smith, R. A. and Miller, K. J., 1977, "Fatigue Cracks at Notches," Int. J. Mech. Sci., Vol. 19, pp. 11-22   DOI   ScienceOn
2 Bannantine, J., Comer, J. and Handrock, J., 1987, "Fundamentals of Metal Fatigue Analysis," pp. 6-8
3 Lee, Y. B., 1978, "An Experimental Study of the Stress Intensity Factor at the weld zone," Master's Thesis, p. 50
4 Shigley, J. E. and Mischike, C. R., 1989, "Mechanical Engineering Design," 5th ed., McGraw- Hill, pp. 296-300
5 Tarasov, L. P. and Grover, H. J., 1950, "Effect of Grinding and Other Finishing Process on the Fatigue Strength of Hardened Steel," Am, Soc. Test. Master. Proc., Vol. 50, p. 668
6 Collins, J. A., 1981, "Failure of Materials in Mechanical Design," Wiley-Interscience, New York
7 Sors, L., 1971, "Fatigue Design of Machine Components," Pergamon Press, Oxford
8 Fuchs, H. O. and Stephen, R. I., 1980, "Metal Fatigue in Engineering," Wiley-Interscience, New York
9 Moore, H. F. and Kommers, J. B., 1921, "An Investigations of the Fatigue of Metals," Univ. Ill. Eng. Exp. Stn. Bull., 124
10 McMahon, J. C. and Lawrence, F. V. Jr., 1984, "Predicting Fatigue Properties through Hardness Measurements," FCP Report No. 105, University of Illinois at Urbana-Champaign
11 Peterson, R. E., 1974, "Stress Concentration Factor," john Wiley & Sons, Inc
12 Pilkey, W. D., 1997, "Stress Concentration Factors, Second Edition," John Wiley & Sons, Inc., pp. 122-125
13 Kuguel, R., 1961, "A Relation between Theoretical Stress Concentration Factor and Fatigue Notch Factor Deduced from the Concept of Highly Stressed Volume," Am. Soc. Test. Master. Proc., Vol. 61, pp. 732-748
14 Toper, T. H., Wetzel, R. M., and Morrowm J. D., 1969, "Neuber's Rule Applied to Fatigue of Notched Specimens," J. Mater., Vol. 4, No. 1, pp. 200-209
15 Boyer, H. E., 1975, "Metal Handbook No.10 Failure Analysis and Prevention," 8th ed., American Society for Metals, Metals Park, Ohio
16 Juvinall, R. C., 1983, "Engineering Considerations of Stress, Strain, and Strength," McGraw-Hill, New York
17 Dowling, N. E., 1979, "Fatigue at Notches and the Local Strain and Fracture Mechanics Approaches,” in Fracture Mechanics, ASTM STP 667, C. W. Smith (ed.), American Society for Testing and Materials, Philadelphia, pp. 247-273
18 Socie, D. F., Dowling, N. E. and Kurath, P., 1984, "Fatigue Life Estimation of Notched Members," in ASTM STP 833, Fracture Mechanics fifteenth Simposium, R. J. Sanford (ed.), American Society for Testing and Materials, Philadelphia, pp. 284-299
19 Lee, Y. B., Oh, B. D. and Kim, S. Y., 2006, "Fatigue Behavior with Respect to Rolling and Residual Stress in Butt-Welded Steel Plate," J. of KSME(A), Vol.30, No.7, pp. 826-832   과학기술학회마을   DOI   ScienceOn