• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.6
• /
• pp.311-317
• /
• 2011

The effect of strain rate on the yield stress of an Al-Li alloy has been investigated at temperatures between 77 and 523 K and over the strain rate range from $1.77{\times}10^{-4}s^{-1}$ to $1.77{\times}10^{-2}s^{-1}$. At testing temperatures below 373 K, the yield stress is almost independent of strain rate at any aging stage. At testing temperatures above 373 K, the yield stress increases linearly with the logarithm of strain rate, and the strain rate dependence increases with increasing testing temperature. The yield stresses of under-aged alloy at temperatures between 373 and 473 K at high strain rates are greater than the yield stress at 77 K. For the alloy under-aged or aged nearly to its peak strength, the temperature range within which the positive temperature dependence of yield stress appears expands to the higher temperature side with increasing strain rate. The strain rate dependence of the yield stress is slightly negative at this aging stage. The yield stress of the over-aged alloy decreases monotonically with decreasing strain rate and with increasing testing temperature above 373 K. The modulus normalized yield stress is nearly constant at testing temperatures below 373 K at any strain rate investigated. And, strength depends largely both on the aging conditions and on the testing temperature. The peak positions in strength vs. aging time curves shift to the side of shorter aging time with increasing testing temperature. For the specimens aged nearly to the peak strength, the positive temperature dependence of yield stress is observed in the temperature range. The shift of peak positions in the aging curves are explained in terms of the positive temperature dependence of cutting stress and the negative temperature dependence of by-passing stress.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.719-729
• /
• 2016

The main objective of the present paper is to study the effect of the yield criterion on the magnitude of the strain rate and plastic work rate intensity factors in axisymmetric flow of isotropic incompressible rigid perfectly plastic material by means of a problem permitting a closed-form solution. The boundary value problem consisting of the axisymmetric deformation of a plastic tube is solved. The outer surface of the tube contracts. The radius of the inner surface does not change. The material of the tube obeys quite a general yield criterion and its associated flow rule. The maximum friction law is assumed at the inner surface of the tube. Therefore, the velocity field is singular near this surface. In particular, the strain rate and plastic work rate intensity factors are derived from the solution. It is shown that the strain rate intensity factor does not depend on the yield criterion but the plastic work rate intensity factor does.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.595-600
• /
• 2011

This paper investigates the effect of strain rate on the anisotropic deformation behavior of advanced high strength steel sheets. Uniaxial tensile tests were carried out on TRIP590 and DP780 steel sheets at strain rates ranging from 0.001/sec to 100/sec to determine yield stresses and r-values at various loading angles from the reference rolling direction. R-values were determined by the digital image correlation technique. Hill48 and Yld2000-2d yield functions were tested for their capability to describe the plastic deformation anisotropy of the materials. Initial yield loci were constructed using the Yld2000-2d yield function, which adequately described the anisotropic behavior of the materials. The shape of the initial yield loci was found to change with different strain rate, and the anisotropic behavior decreased with increasing strain rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.112-121
• /
• 2007

Grain filling is a crucial factor that determines grain yield in crops since it is the final process directly associated with crops' yield performance. Grain filling process can be characterized by the interaction of rate and duration of grain filling. This study was conducted, using 16 temperate japonica rice genotypes, with aims to (1) seek variations in grain filling duration and rate on area basis, (2) compare the contribution of grain filling duration and rate to grain yield, and (3) examine the influence of temperature and solar radiation for effective grain filling on grain yield in relation to grain filling duration and rate. Grain filling rate and duration exhibited highly significant variations in the ranges of $20.7{\sim}46.3\;g\;m^{-2}d^{-1}\;and\;11.2{\sim}35.5$ days, respectively, depending on rice genotypes. Grain yield on unit area basis was associated positively with grain filling duration but negatively with grain filling rate. Grain filling rate and duration were negatively correlated with each other. Final grain weight increased linearly with the rise in both cumulative mean temperature and cumulative solar radiation for effective grain filling. Higher cumulative mean temperature and cumulative solar radiation for effective grain filling were the results of longer grain filling duration, but not necessarily higher daily mean temperature and daily solar radiation for effective grain filling. Grain filling rate demonstrated an increasing tendency with the rise in daily mean temperature for effective grain filling but their relationship was not obviously clear. It was concluded that grain filling duration, which influenced cumulative mean temperature and cumulative solar radiation for effective grain filling, was the main factor that determined grain yield on unit area basis in temperate Japonica rice.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.3
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.

• Journal of Embryo Transfer
• /
• v.23 no.4
• /
• pp.291-298
• /
• 2008

We separately cultured follicular oocytes collected from individual ovaries of slaughtered Korean native cows and examined both the embryonic development rate and pregnancy rate after embryo transplantation according to the meat yield and quality grades of the source beef carcass. Oocytes from meat yield grade B cows exhibited a higher fertilization rate and embryonic developmental rate to the eight-cell stage than oocytes from grade A or C animals (p<0.05), but there was no significant difference in rate of development to the blastocyst stage among meat yield grades A, Band C. The oocyte cleavage rate and development rate to the eight-cell stage from meat quality grade 3 cattle was higher than grades 1++, 1+, 1 and 2 (p<0.05). Embryos derived from grade animals displayed a development rate to the blastocyst stage of 19.4%, which was also higher than all other meat quality grades (p<0.05). Transplantation of in vitro-cultured oocytes from meat yield grade A ovaries led to a higher pregnancy rate (64.2%) than in vitro-cultured oocytes from meat yield grade B ovaries (56.5%), but there was no significant difference between the two groups in pregnancy or abortion rates. In conclusion, embryonic development rate and pregnancy rate has a close relation to meat quality grades of the source beef carcass, this results is to give information for the Korean native cows improvement of breed.

• Plant Resources
• /
• v.8 no.3
• /
• pp.281-285
• /
• 2005

In order to select suitable fertilizer level and sowing rate of Dangyo $^{#8}$(hybrid) rapeseed at the southern area of Korea, two varieties of Naehanyuchae (Normal) and Dangyo $^{#8}$(hybrid) rapeseed currently grown for oil production by two fertilizer level with 10-8-8 kg/10a and 15-8-8 kg/10a and three sowing rate with 500 g/10a, 1,000g/10a and 1,500g/10a with relatively high yield was grown at the same condition yield and yield components were observed. Dangyo $^{#8}$(hybrid) rapeseed was superior to oil-eed rapeseed for yield at the 15-8-8 kg/10a of fertilizer and 1,500 g/10a of sowing rate. Fertilizer level, $N-P_{2}O_5-K_{2}O$ = 15-8-8 kg/10a and sowing rate, 1,500 g/10a showed somewhat higher value in two varieties of Naehanyuchae(Normal) and Dangyo $^{#8}$(hybrid).

• Korean Journal of Radiology
• /
• v.23 no.12
• /
• pp.1290-1300
• /
• 2022

Objective: "Diagnostic yield," also referred to as the detection rate, is a parameter positioned between diagnostic accuracy and diagnosis-related patient outcomes in research studies that assess diagnostic tests. Unfamiliarity with the term may lead to incorrect usage and delivery of information. Herein, we evaluate the level of proper use of the term "diagnostic yield" and its related parameters in articles published in Radiology and Korean Journal of Radiology (KJR). Materials and Methods: Potentially relevant articles published since 2012 in these journals were identified using MEDLINE and PubMed Central databases. The initial search yielded 239 articles. We evaluated whether the correct definition and study setting of "diagnostic yield" or "detection rate" were used and whether the articles also reported companion parameters for false-positive results. We calculated the proportion of articles that correctly used these parameters and evaluated whether the proportion increased with time (2012-2016 vs. 2017-2022). Results: Among 39 eligible articles (19 from Radiology and 20 from KJR), 17 (43.6%; 11 from Radiology and 6 from KJR) correctly defined "diagnostic yield" or "detection rate." The remaining 22 articles used "diagnostic yield" or "detection rate" with incorrect meanings such as "diagnostic performance" or "sensitivity." The proportion of correctly used diagnostic terms was higher in the studies published in Radiology than in those published in KJR (57.9% vs. 30.0%). The proportion improved with time in Radiology (33.3% vs. 80.0%), whereas no improvement was observed in KJR over time (33.3% vs. 27.3%). The proportion of studies reporting companion parameters was similar between journals (72.7% vs. 66.7%), and no considerable improvement was observed over time. Conclusion: Overall, a minority of articles accurately used "diagnostic yield" or "detection rate." Incorrect usage of the terms was more frequent without improvement over time in KJR than in Radiology. Therefore, improvements are required in the use and reporting of these parameters.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.116-127
• /
• 2009

This research aims to improve the efficiency of production by selecting production configuration with high yield rate and lower error rate based on production history of steel pipe. To achieve this, we identify the properties of various types of MTO(make-to-order) steel pipe products and determine properties affecting yield rate and error rate using decision tree technique. From experimental results, we find out that specification is critical to determine yield rate and error rate of ERW steel pipes with mostly small and medium caliber, and an external diameter range in case of roll benders or spiral steel pipes with mostly large caliber. This research classified and embodied the patterns of yield rate and error rate mathematically by product properties.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.3
• /
• pp.221-226
• /
• 2000

Cassia mimosoides var. nomame was grown at five seeding rates (10, 20, 30, 40 and 50 kg/ha) from March 31 to September 21, 1998 at Cheju to determine influence of seeding rate on agronomic characters, and forage yield and quality. Days to flowering increased from 126 to 129 days as seeding rate increased from 10 to 50 kg/ha. The plant height increased from 86 to 99 cm as seeding rate was increased from 10 to 30 kg/hac and then decreased to 93 cm at a rate of 50 kglha. With increasing seeding rate, stem diameter quadratically decreased and the number of branches and green leaves per plant linearly decreased but the number of withering leaves per plant linearly increased. As seeding rate increased &om 10 to 30 kg/ha, fresh forage, dry matter, crude protein, and total digestible nutrients (TDN) yield increased 'from 30.7 to 49.1, 7.5 to 12.2, 0.90 to 1.57 and 4.09 to 7.09 MTha, respectively, and then decreased with further increased seeding rates. Crude protein, ether extract, nitrogen free extract, and TDN wntent increased 12.1 to 14.2% 2.2 to 2.9%, 35.1 to 39.2%, 54.8 to 60.3% respectively, but crude fiber wntent decreased 39.8 .to 33.3% and crude ash declined 4.9 to 3.8% as seeding rate increased from 10 to 50 kgiha. The optimum seeding rate to obtain the highest TDN yield was estimated to be 36kglha. (Key words : Cassia mimosoides var. nomame, Seeding rate, Forage yield, Forage quality)