• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.417-423
• /
• 1997

The objective of this study Is to supply basic data for large reservoir sedimentation research In future and make suggestions to maintain and opera능 the reservoir more of efficiently. At first, previous studios about the estimation of sediment yield rate were reviewed in Korea. And the discharge rating curves of upstream stage gauging stations and the correlation between dam Inflow and stage discharge were analyzed. With the analysis results, the spec유c sediment rate of Soyanggang dam was estimated as 608 m3/km2/yr. It was similar to that of Soyanggang dam feasibility study and 1994's field surveys of the reservoir than that of 1983's field surveys. Because the sediment rating curves were derived under the low discharge conditions, It needs to be checked under the flood conditions. However, the suggested methods such as flowrate analysis and sediment estimation will be useful to the sediment studios In future. Key words . reservoir sediment, sediment yield rate, rating curve, flowrate analysis.

• IE interfaces
• /
• v.21 no.2
• /
• pp.151-160
• /
• 2008

Defect size distribution is a probability density function for the defects that occur on wafers or glasses during semiconductor/LCD fabrication. It is one of the most important information to estimate manufacturing yield using well-known statistical estimation methods. The defects are detected by automatic optical inspection (AOI) facilities. However, the data that is provided from AOI is not accurate due to resolution of AOI and its defect detection mechanism. It causes distortion of defect size distribution and results in wrong estimation of the manufacturing yield. In this paper, I suggest a size conversion method and a maximum likelihood estimator to overcome the vague defect size information of AOI. The methods are verified by the Monte Carlo simulation that is constructed as similar as real situation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.124-137
• /
• 2018

Due to the decrease in coastal productivity and deterioration in the quality of ecosystem which result from the excessive overfishing of fisheries resources and the environmental pollution, fisheries resources in the Korean waters hit the dangerous level in respect of quantity and quality. In order to manage sustainable and effective fisheries resources, it is necessary to suggest the potential yield (PY) for clarifying available fisheries resources in the Korean waters. So far, however, there have been few studies on the estimation methods for PY in Korea. In addition, there have been no studies on the comparative analysis of the estimation methods and the substantial estimation methods for PY targeted for large marine ecosystem (LME) For the reasonable management of fisheries resources, it is necessary to conduct a comprehensive study on the estimation methods for the PY which combines population dynamics and ecosystem dynamics. To reflect the research need, this study conducts a comparative analysis of estimation methods for the PY in the Korean waters of the East Sea to understand the advantages and disadvantages of each method, and suggests the estimation method which considered both population dynamics and ecosystem dynamics to supplement shortcomings of each method. In this study, the maximum entropy (ME) model of the holistic production method (HPM) is considered to be the most reasonable estimation method due to the high reliability of the estimated parameters. The results of this study are expected to be used as significant basic data to provide indicators and reference points for sustainable and reasonable management of fisheries resources.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.3
• /
• pp.47-57
• /
• 2010

Yield seismic coefficient plays an important role in the estimation of permanent displacement of a soil slope subjected to earthquake using Newmark's sliding block theory. However, yield seismic coefficients currently used in practices are not mechanically rigorous since most of them are estimated using limit equilibrium methods considering equilibrium condition only. Therefore, estimation of permanent displacement of a soil slope based on existing yield seismic coefficient may cause problems. Limit analysis estimating the range of mechanically rigorous solution is thought to be effective in evaluating the validity of existing yield seismic coefficient. In this study, a simple stability chart for yield seismic coefficient useful in practices is proposed by considering various slope conditions including stability number, slope inclination, strength parameters, etc.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.61-70
• /
• 2010

In case of groundwater recharge estimation using water table fluctuation method, specific yield affects the accuracy and confidence level of recharge rate. Nevertheless, there have been few studies on the method for the accurate estimation of specific yield in Korea. Specific yield estimated from the relationship between rainfall and groundwater levels is reasonable compared to the other methods. However, lots of factors such as artificial pumping, evapotranspiration by the plants, and a sudden increase in water levels by a heavy rainfall can affect the pattern of groundwater levels' fluctuation and make an over-estimated or under-estimated specific yield. This study obtained a reasonable specific yield by using a daily or 12 hourly average of rainfall and groundwater levels measured in a dry season.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.3
• /
• pp.52-64
• /
• 2020

The universal soil loss equation (USLE), a model for estimating the potential soil loss, has been used not only in research areas but also in establishing national policies in South Korea. Despite its wide applicability, USLE cannot adequately address the effect of seasonal variances. To overcome this limit, the ArcGIS-based Sediment Assessment Tool for Effective Erosion (ArcSATEEC) has been developed as an alternative model. Although the field-scale (< 100 ㎡) application of this model produced reliable estimation results, it is still challenging to validate accuracy of the model estimation because it only estimates potential soil losses, not the actual sediment yield. Therefore, in this study, a method for estimating actual soil loss based on the ArcSATEEC model was suggested. The model was applied to eight watersheds in South Korea to estimate sediment yields. Correction factor was introduced for each watershed, and the estimated sediment yield was compared with that of the estimated yield by LOAD ESTimator (LOADEST). Sediment yield estimation for all watersheds exhibited reliable results, and the validity of the proposed correction factor was confirmed, suggesting the correction factor needs to be considered in estimating actual soil loss.

• Korean Journal of Remote Sensing
• /
• v.22 no.3
• /
• pp.183-197
• /
• 2006

Combinations of visible and near-infrared (NIR) bands in an image are widely used for estimating vegetation vigor and productivity. Using this approach to understand within-field grain crop variability could allow pre-harvest estimates of yield, and might enable mapping of yield variations without use of a combine yield monitor. The objective of this study was to estimate within-field variations in crop yield using vegetation indices derived from hyperspectral images. Hyperspectral images were acquired using an aerial sensor on multiple dates during the 2003 and 2004 cropping seasons for corn and soybean fields in central Missouri. Vegetation indices, including intensity normalized red (NR), intensity normalized green (NG), normalized difference vegetation index (NDVI), green NDVI (gNDVI), and soil-adjusted vegetation index (SAVI), were derived from the images using wavelengths from 440 nm to 850 nm, with bands selected using an iterative procedure. Accuracy of yield estimation models based on these vegetation indices was assessed by comparison with combine yield monitor data. In 2003, late-season NG provided the best estimation of both corn $(r^2\;=\;0.632)$ and soybean $(r^2\;=\;0.467)$ yields. Stepwise multiple linear regression using multiple hyperspectral bands was also used to estimate yield, and explained similar amounts of yield variation. Corn yield variability was better modeled than was soybean yield variability. Remote sensing was better able to estimate yields in the 2003 season when crop growth was limited by water availability, especially on drought-prone portions of the fields. In 2004, when timely rains during the growing season provided adequate moisture across entire fields and yield variability was less, remote sensing estimates of yield were much poorer $(r^2<0.3)$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.7-10
• /
• 2002

The breeding data relating to Hariana herd spread over 18 years (1979-96) were analysed to estimate genetic, phenotypic and environmental changes in characters of economic importance which might have taken place during the several years of selective breeding practiced in the herd. The average genetic changes in a given character were estimated by four methods. The phenotypic trends observed for different economic traits were not significant. On changing the method of estimation, magnitude and direction of genetic trends changed. Comparison of estimates of genetic trends by different methods showed that adjustments for biases due to non-random allotment of dams with respect to their age and merit suggested by Powell and Freeman (1974) were useful for increasing the precision of the estimates. Hence, this method was found to be the best method for estimation of genetic trends. The estimate of genetic trends by this method were 4.03${\pm}$6.21 days, 3.24${\pm}$5.33 kg, 0.15${\pm}$0.43 days, 0.09${\pm}$0.59 days, 0.01${\pm}$0.02 kg and 0.01${\pm}$0.01 kg for age at first calving, first lactation milk yield, first lactation length, first calving interval, first lactation milk yield per day lactation length and first lactation milk yield per day of calving interval, respectively.

• Journal of Korea Water Resources Association
• /
• v.34 no.3
• /
• pp.199-207
• /
• 2001

Due to the nationwide development, sediment yield has to be estimated to design the sedimentation basin which is used to minimize the effects of construction or disturbing the natural soil condition. But there is no proved equation for the estimation of sediment yield in Korea. Therefore, applicability and the limitation of RUSLE (revised universal sediment loss equation) sediment yield equation is examined for the construction sites, where the rainfall and sediment data are available. General mistakes in estimation of the RUSLE parameters are also discussed. It is found that RUSLE could be applied in Korea as long as the sediment delivery ratio was considered. Appropriate estimation method of sediment delivery ratio are also proposed.