• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2004

This paper presents an implementation of smart antenna system channel card that executes modulation/demodulation. Operations and performances of modules of implemented channel card is confirmed and field test of channel card shows the performance of smart antenna systems. Based on the analysis obtained from the field test in cdma2000 1x environments which contains multipath lading, it is confirmed that smart antenna system channel card provide exact beampattern to the DOA and performance of proposed channel card has better FER by 5∼8 times, compared to 2 antenna diversity system.

• Electrical & Electronic Materials
• /
• v.6 no.4
• /
• pp.330-338
• /
• 1993

Channel의 폭과 길이가 15 x 15.mu.m, 15 x 1.5.mu.m, 1.9 x 1.7.mu.m인 비휘발성 SNOSFET EEPROM 기억소자를 CMOS 1 Mbit 설계규칙에 의하여 제작하고 체널크기에 따른 $I_{D}$- $V_{G}$특성 및 스위칭 특성을 조사하여 비교하였다. 게아트에 전압을 인가하여 질화막에 전하를 주입시키거나 소거시킨 후 특성을 측정한 결과, 드레인전류가 적게 흐르는 저전도상태와 전류가 많이 흐르는 고전도상태로 되는 것을 확인하였다. 15 x 15.mu.m의 소자는 전형적인 long channel특성을 나타냈으며 15 x 1.5.mu.m, 1.9 x 1.7.mu.m는 short channel특성을 보였다. $I_{D}$- $V_{G}$ 특성에서 소자들의 임계 문턱전압은 저전도상태에서 $V_{W}$=+34V, $t_{W}$=50sec의 전압에서 나타났으며 메모리 윈도우 폭은 15 x 15.mu.m, 15 x 1.5.mu.m, 1.9 x 1.7.mu.m의 소자에서 각각 6.4V, 7.4V, 3.5V였다. 스위칭 특성조사에서 소자들은 모두 논리스윙에 필요한 3.5V 메모리 윈도우를 얻을 수 있었으며 논리회로설계에 적절한 정논리 전도특성을 가졌다.특성을 가졌다.다.다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.44-48
• /
• 2008

Hole mobility characteristics of two representative biaxially strained SiGe/Si structures with high Ge contents are studied, They are single channel ($Si/Si_{1-x}Ge_x/Si$ substrate) and dual channel ($Si/Si_{1-y}Ge_y/Si_{1-x}Ge_x/Si$ substrate), where the former consists of a relaxed SiGe buffer layer with 60 % Ge content and a tensile-strained Si layer on top, and for the latter, a compressively strained SiGe layer is inserted between two layers, Owing to the hole mobility performance between a relaxed SiGe film and a compressive-strained SiGe film in the single channel and the dual channel, the hole mobility behaviors of two structures with respect to the Si cap layer thickness shows the opposite trend, Hole mobility increases with thicker Si cap layer for single channel structure, whereas it decreases with thicker Si cap layer for dual channel. This hole mobility characteristics could be easily explained by a simple capacitance model.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.271-273
• /
• 2008

A novel white-LED (light emitting diode) backlight system for 46"LCD TVs which involves the average current controlled X-Y channel driving method is proposed, which is composed of 1 converter and row and column channel switches. In the conventional X-Y channel driving driven with a constant voltage source, the driving current of LED increases because the threshold voltage of LED decreases when LED temperature goes up. To maintain the luminance of backlight constant, the average current controlled X-Y channel driving will be employed. Finally the results are confirmed by experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.95-101
• /
• 2011

In wireless X networks where all transmitters send the independent messages to all receivers, the theoretical bound on the degrees of freedom (DOF) and interference alignment (IA) scheme for its achievability are given by Cadambe and Jafar [1]. However, IA scheme for wireless X network may be infeasible in practice unless the transmitters have the perfect channel information. In addition, if the transmitter with single antenna uses time-varying channel coefficients as a beamforming vector, the infinite channel extension is required to achieve the theoretical bound on the DOF of wireless X networks with perfect IA scheme. In this paper, we consider K-user MIMO X network where K transmitters and K receivers have M antennas each. While the beamforming vectors have been constructed with multiple channel uses over multiple time slot in the earlier work, we consider the beamforming vectors constructed only by a spatial signature over unit time. Accordingly the channel information at the transmitters can be available instantaneously. Then we propose the perfect IA scheme with no channel extension. Based on our sum-rate analysis and the simulation results, we confirm that our proposed scheme can achieve MK/2 DOF which is quite close to the theoretical bound on the DOF region of wireless X networks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1390-1397
• /
• 2000

This paper presents the multi-channel active vibration control of a flexible plate of the acoustically loaded enclosure. The flexible plate was excited acoustically with sinusoidal and white noise input. The control was performed by two piezo ceramic actuators and two accelerometers. The experimental results were compared with the single channel control results. In the case of white noise input, 20 dB of vibration reduction was achieved below 300Hz frequency range. The experimental results demonstrate that multi-channel filtered-x LMS algorithm is effective than single-channel filtered-x LMS algorithm in active vibration control of plate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.367-380
• /
• 2013

In this paper, an analytical threshold voltage model is developed for a short-channel double-material-gate (DMG) strained-silicon (s-Si) on silicon-germanium ($Si_{1-X}Ge_X$) MOSFET structure. The proposed threshold voltage model is based on the so called virtual-cathode potential formulation. The virtual-cathode potential is taken as minimum channel potential along the transverse direction of the channel and is derived from two-dimensional (2D) potential distribution of channel region. The 2D channel potential is formulated by solving the 2D Poisson's equation with suitable boundary conditions in both the strained-Si layer and relaxed $Si_{1-X}Ge_X$ layer. The effects of a number of device parameters like the Ge mole fraction, Si film thickness and gate-length ratio have been considered on threshold voltage. Further, the drain induced barrier lowering (DIBL) has also been analyzed for gate-length ratio and amount of strain variations. The validity of the present 2D analytical model is verified with ATLAS$^{TM}$, a 2D device simulator from Silvaco Inc.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.811-817
• /
• 2020

This study aims to evaluate the Modulation Transfer Function (MTF) according to the change in the number of channels of the CT examination device by changing the posture of the patient to the X-axis and Y-axis in the wrist joint CT examination. Using a CT device and a wrist phantom, the test was performed by moving 0 (matched), 5, 10, and 15 cm in the X-axis around the isocenter, and the Z-axis was rotated by -20° and -40°. For the test, 16, -40 and 64 channels were used to check whether there was a difference for each number of channels. The examined images were compared by measuring the MTF values of the ulna and left and right sides of the radius. In the experiment where the isocenter was moved along the X-axis, the MTF value decreased with an increase in the moving distance, and the MTF value was found to be unaffected by the number of channels. In the experiment in which the wrist joint was rotated by -20° and -40° on the Z-axis, the degree of deviation and MTF were found to be irrelevant. It was not related to the number of channels either. In conclusion, the movement of the wrist along the X-axis should be restrained as much as possible for a wrist joint CT scan, whereas deviation around the Z-axis depending on the environment for the patient would not affect the MTF of the image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.147-156
• /
• 2004

This paper presents an implementation and performance analysis of an access channel decoder which exploits a diversity gain due to the independent magnitude of received signals energy at each of antenna elements of a smart antenna BTS (Base-station Transceiver Subsystem) operating in CDMA2000 1X signal environment. Proposed access channel decoder consists of a searcher supporting 4 fingers, Walsh demodulator, and demodulator controller. They have been implemented with 5 of 1 million-gate FPGA's (Field Programmable Gate Array) Altera's APEX EP20K1000EBC652 and TMS320C6203 DSP (digital signal processing). The objective of the proposed access channel decoders is to enhance the data retrieval at co]1-site during the access period, for which the optimal weight vector of the smart antenna BTS is not available. Through experimental tests, we confirmed that the proposed access channel decoder exploitng the diversity technique outperforms the conventional one, which is based on a single antenna channel, in terms of detection probability of access probe, access channel failure probability, and $E_{b/}$ $N_{o}$ in Walsh demodulator.r.r.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.264-268
• /
• 1996

Panax-ginseng saponin has been known to exert various pharmacological effects on cellular metabolism. This study was performed to determine the effect of ginseng saponin on gap junction channel-mediated intercellular communication, using an established in vitro system of reconstituted gap junction channels. Gap junction channels are a specialized plasma membrane fraction, which are permeable to relatively large water-soluble molecules. The sucrose permeable property of reconstituted gap junction channels was completely inhibited with 0.1 % (w/v) of ginseng saponin. We also compared the effect of ginseng saponin with that of Triton X-100, a nonionic detergent, on the same system. Triton X-100 showed significantly different effect on sucrose-permeability of gap junction channel from that was affected by ginseng saponin. The structures of liposomes containing gap junction channels was significantly destroyed by Triton X-100.