Journal of the Korean Society of Clothing and Textiles
/
v.19
no.5
/
pp.826-841
/
1995
This study is concerned with the functional utility of movement in sleeve from an ergonomic viewpoint. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are. 1. The expansion rate of upper extremity was higher in length than in circumference mesurements. The amounts of expansion were, especially high (more than 60mm) for inner arm length, axillary arm circumference, and outer arm length. Therefore, a lot of ease is necessary for these parts. On the other hand, armhole circumference, forearm circumference, and wrist circumference had low rates of expansion. The sleeve cap length was also contracted in all motions. 2. The expansion rate and the range of expansion and contraction were higher in the upper arm than in the forearm. The main points of expansion were the axillary and elbow parts. The segment of maximum expansi (rate of 44.8%) was Iii of axillary parts. As the body surface expands mainly in some segments, it is desirable to allow ease to the main segments of expansion. 3. In a basic sleeve, necessary ease was lacking in the measurements for outer arm length and axillary arm circumference, while it was too large in armhole circumference, forearm circumference, wrist circumference, and sleeve cap length. Therefore, a basic sleeve is inadequate as a functional sleeve for hard work in point of functional utility of movement. Wider application of these findings would lead to an improvement in the comfort of workers.
Journal of the Korean Society of Clothing and Textiles
/
v.33
no.5
/
pp.827-839
/
2009
Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.
The goal of this study is to provide basic data on developing circular knit basic pattern for women in their 20's. Production conditions of circular knit product pattern making among domestic women's apparel industry was researched, and collected data on sizes and ease amounts from woven and circular knit pattern were compared and analyzed. According to the result of the survey, product measurements adjusted to the actual body size fit for the brand's image were used, and the common problem among manufacturers and consumers regarding circular knit products turned out to be change in size and form due to stretching. For the basic pattern of circular knit, stretching quality was reflected in the woven basic pattern based on plain stitch(single knit) and then dart was removed and ease amount was reduced. The result of looking into size and ease amount about woven and circular knit torso & sleeve block shows that there is a significant difference among chest circumference, hip circumference, bi-shoulder length, interscye back, interscye front, scye depth, upper arm circumference and wrist circumference, and it was clear that circumference and width on the areas around the wrist tended to fit around the body more when circular knit was used instead of woven fabric.
Kwon, Chae-Ryung;Jang, Mina;Jeong, Da Wun;Kim, Dong-Eun
Journal of the Korean Society of Clothing and Textiles
/
v.43
no.3
/
pp.416-426
/
2019
This study measured and analyzed male firefighters hand sizes as well as suggested data for developing firefighting gloves with a good fit. Accordingly, body dimensions related to the hand were measured for 100 male firefighters. Twenty-three measuring items related to the hand and lower arm were selected. The firefighters' measurement data were compared to general adult male measurements from the 6th Korean Anthropometric data to analyze the hand sizes characteristics of firefighters. As a result, height, hand circumference, hand breadth, wrist circumference, elbow-wrist length, forearm-fingertip length and firefighter weight were significantly larger than adult males. A correlation analysis for 23 items was conducted to select items used as standards for setting a size when manufacturing firefighting gloves. Hand length and circumference were selected as representative hand parts for making firefighting gloves. Cross analysis between hand length and circumference were conducted to find the section showing the highest distribution ratio. As a result, the highest sections were between 19cm and 21cm for hand circumference and between 18.5cm and 19.5cm for hand length, which may be suggested as the most important ranges.
The purpose of this study was to develop the pattern-making for Korean glove. To develop the pattern-making for glove this study comprehensive list of candidate hand data was reviewed and the manufacturers(career over th 15 years) were interviewed on the method of glove. The results of regression analysis(hand data) were as follows (unit: cm): wrist thumb tip length = middle finger length + 3.22, hand bread = 1.25 $\times$ middle finger length + 2.18, middle finger breadth at dist = 0.23 $\times$ index finger circumference + 0.4, maximum hand circumference = 3.15 $\times$ index finger circumference + 4.13, middle finger circumference = 0.91 $\times$ index finger circumference + 0.47, maximum hand thickness = 0.69 $\times$ index finger circumference -0.02. Hand measurements for glove pattern-making were developed: There were palmar hand length, hand circumference, index finger circumference and middle finger length.
The purpose of this study was to establish the range of the body frame size determination for elderly subjects. Anthropometric data were collected from over 60 years old 229 elderly peoples. Three methods for determining frame size were to measure elbow breadth, ankle breadth, and height to wrist circumference ratio. Among the three variables, ankle breadth exhibited the lowest correlation with skinfold thickness and changed little with age. A pairwise comparision among three methods for determining frame size showed that the highest incidence of overall agreement was achieved when the ankle breadth and elbow breadth were compared. This analysis supported that ankle breadth can be used as an indicator of frame size. Small, medium and large categories of ankle breadth were presented depending on whether the measurements were below the 15th, between the 15th and 85th, and above the 85th percentile for ankle breadth.
Journal of Korean Society of Industrial and Systems Engineering
/
v.38
no.2
/
pp.1-7
/
2015
As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + $\epsilon$. This model can be used to estimate the percentage of body fat using only a tape measure.
It is improtant to get accurate information about the grip strength for designing ergonomic grips and handles. It has been known that the excessive and repetitive use of grip force and unnatural posture of the wrist may cause cumulative trauma disorders (CTDs) such as carpal tunnel syndrome, tendrome, tendonitis, DeQuervan's disease, etc. In this paper we have measured the grip strength for sitting and standing posture for Korean adults ; 114 males and 105 females aged from the 20's to above the 50's. And this paper performed statistical analysis for deriving characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum grip strength posture is exerted under standing posture with the elbow in full extension (180 .deg. ) for both males and females (2) There is significant difference among posture, sex and right and/or left handedness (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has corre- lations with the age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist, and breadth of wrist for males.
1. PURPOSE This research is a study on constitutional diagnosis through the external appearances, and for finding shape differences of the hand and foot according to the Sasang Constitution. 2. Method We collected 148 person who were healthy and measured length, breadth, circumference and thickness of their hands and feet with 'The Measurement of R. Martin'. We analyzed shape differences of hand and foot according to the Sasang Constitution and made a certain conclusion. 3. Results and Conclusions We got the morphologic characteristics of hand and foot according to the Sasang Constitution. (1) The physical characteristics. The weight is heaviest in Taeumin. (2) The morphologic characteristics of Hand. (1) The wrist circumference is longest in Taeumin. (2) The finger length / hand length(ratio) is higher Soeumin than Taeumin. (3) The wrist breadth is largest in Taeumin(only male). (4) The wrist breadth is larger Taeumin than Soeumin(only female). (5) The palm length is longer Taeumin than Soyangin(only male). (6) The maximum hand breadth is larger Taeumin than Soeumi (only male). (7) The 2nd, 3rd and 4th finger length is longer Soeumin than Soyangin(only male). (3) The morphologic characteristics of Foot. (1) The foot thickness is thickest in Taeumin. (2) The foot breadth is largest in Taeumin. (3) The ankle circumference is longest in Taeumin(only male).
Journal of the Korean Society of Clothing and Textiles
/
v.47
no.4
/
pp.696-710
/
2023
This study investigated the problems of Korean female combat uniforms and collected primary data for developing new combat uniforms with improved functionality. We analyzed fit and motion suitability by administering a questionnaire evaluating the current uniforms to 20 Korean female soldiers. The evaluation of fit suitability found that satisfaction with the combat uniforms was generally high. However, short sleeve length, large wrist circumference, small hip circumference, large ankle circumference, and low crotch height were discomfort factors. In the evaluation of motion suitability, dissatisfaction was found with the sleeve circumference, elbow circumference, armhole circumference, knee crease and crotch height, and back waist height during motion. Therefore, it is necessary to establish a more segmented size system that suits the physique of current female soldiers and to devise appropriate solutions for improving motion suitability. This study is meaningful for its evaluation of the current combat uniform of female soldiers, and it is expected to serve as a reference for the future development of military combat uniforms for this group.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.