• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.826-841
• /
• 1995

This study is concerned with the functional utility of movement in sleeve from an ergonomic viewpoint. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are. 1. The expansion rate of upper extremity was higher in length than in circumference mesurements. The amounts of expansion were, especially high (more than 60mm) for inner arm length, axillary arm circumference, and outer arm length. Therefore, a lot of ease is necessary for these parts. On the other hand, armhole circumference, forearm circumference, and wrist circumference had low rates of expansion. The sleeve cap length was also contracted in all motions. 2. The expansion rate and the range of expansion and contraction were higher in the upper arm than in the forearm. The main points of expansion were the axillary and elbow parts. The segment of maximum expansi (rate of 44.8%) was Iii of axillary parts. As the body surface expands mainly in some segments, it is desirable to allow ease to the main segments of expansion. 3. In a basic sleeve, necessary ease was lacking in the measurements for outer arm length and axillary arm circumference, while it was too large in armhole circumference, forearm circumference, wrist circumference, and sleeve cap length. Therefore, a basic sleeve is inadequate as a functional sleeve for hard work in point of functional utility of movement. Wider application of these findings would lead to an improvement in the comfort of workers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.827-839
• /
• 2009

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.637-646
• /
• 2016

The goal of this study is to provide basic data on developing circular knit basic pattern for women in their 20's. Production conditions of circular knit product pattern making among domestic women's apparel industry was researched, and collected data on sizes and ease amounts from woven and circular knit pattern were compared and analyzed. According to the result of the survey, product measurements adjusted to the actual body size fit for the brand's image were used, and the common problem among manufacturers and consumers regarding circular knit products turned out to be change in size and form due to stretching. For the basic pattern of circular knit, stretching quality was reflected in the woven basic pattern based on plain stitch(single knit) and then dart was removed and ease amount was reduced. The result of looking into size and ease amount about woven and circular knit torso & sleeve block shows that there is a significant difference among chest circumference, hip circumference, bi-shoulder length, interscye back, interscye front, scye depth, upper arm circumference and wrist circumference, and it was clear that circumference and width on the areas around the wrist tended to fit around the body more when circular knit was used instead of woven fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.416-426
• /
• 2019

This study measured and analyzed male firefighters hand sizes as well as suggested data for developing firefighting gloves with a good fit. Accordingly, body dimensions related to the hand were measured for 100 male firefighters. Twenty-three measuring items related to the hand and lower arm were selected. The firefighters' measurement data were compared to general adult male measurements from the 6th Korean Anthropometric data to analyze the hand sizes characteristics of firefighters. As a result, height, hand circumference, hand breadth, wrist circumference, elbow-wrist length, forearm-fingertip length and firefighter weight were significantly larger than adult males. A correlation analysis for 23 items was conducted to select items used as standards for setting a size when manufacturing firefighting gloves. Hand length and circumference were selected as representative hand parts for making firefighting gloves. Cross analysis between hand length and circumference were conducted to find the section showing the highest distribution ratio. As a result, the highest sections were between 19cm and 21cm for hand circumference and between 18.5cm and 19.5cm for hand length, which may be suggested as the most important ranges.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.981-991
• /
• 2009

The purpose of this study was to develop the pattern-making for Korean glove. To develop the pattern-making for glove this study comprehensive list of candidate hand data was reviewed and the manufacturers(career over th 15 years) were interviewed on the method of glove. The results of regression analysis(hand data) were as follows (unit: cm): wrist thumb tip length = middle finger length + 3.22, hand bread = 1.25 $\times$ middle finger length + 2.18, middle finger breadth at dist = 0.23 $\times$ index finger circumference + 0.4, maximum hand circumference = 3.15 $\times$ index finger circumference + 4.13, middle finger circumference = 0.91 $\times$ index finger circumference + 0.47, maximum hand thickness = 0.69 $\times$ index finger circumference -0.02. Hand measurements for glove pattern-making were developed: There were palmar hand length, hand circumference, index finger circumference and middle finger length.

• Korean Journal of Rural Living Science
• /
• v.5 no.2
• /
• pp.117-123
• /
• 1994

The purpose of this study was to establish the range of the body frame size determination for elderly subjects. Anthropometric data were collected from over 60 years old 229 elderly peoples. Three methods for determining frame size were to measure elbow breadth, ankle breadth, and height to wrist circumference ratio. Among the three variables, ankle breadth exhibited the lowest correlation with skinfold thickness and changed little with age. A pairwise comparision among three methods for determining frame size showed that the highest incidence of overall agreement was achieved when the ankle breadth and elbow breadth were compared. This analysis supported that ankle breadth can be used as an indicator of frame size. Small, medium and large categories of ankle breadth were presented depending on whether the measurements were below the 15th, between the 15th and 85th, and above the 85th percentile for ankle breadth.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.1-7
• /
• 2015

As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + $\epsilon$. This model can be used to estimate the percentage of body fat using only a tape measure.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.73-83
• /
• 1997

It is improtant to get accurate information about the grip strength for designing ergonomic grips and handles. It has been known that the excessive and repetitive use of grip force and unnatural posture of the wrist may cause cumulative trauma disorders (CTDs) such as carpal tunnel syndrome, tendrome, tendonitis, DeQuervan's disease, etc. In this paper we have measured the grip strength for sitting and standing posture for Korean adults ; 114 males and 105 females aged from the 20's to above the 50's. And this paper performed statistical analysis for deriving characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum grip strength posture is exerted under standing posture with the elbow in full extension (180 .deg. ) for both males and females (2) There is significant difference among posture, sex and right and/or left handedness (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has corre- lations with the age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist, and breadth of wrist for males.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.2
• /
• pp.195-207
• /
• 1999

1. PURPOSE This research is a study on constitutional diagnosis through the external appearances, and for finding shape differences of the hand and foot according to the Sasang Constitution. 2. Method We collected 148 person who were healthy and measured length, breadth, circumference and thickness of their hands and feet with 'The Measurement of R. Martin'. We analyzed shape differences of hand and foot according to the Sasang Constitution and made a certain conclusion. 3. Results and Conclusions We got the morphologic characteristics of hand and foot according to the Sasang Constitution. (1) The physical characteristics. The weight is heaviest in Taeumin. (2) The morphologic characteristics of Hand. (1) The wrist circumference is longest in Taeumin. (2) The finger length / hand length(ratio) is higher Soeumin than Taeumin. (3) The wrist breadth is largest in Taeumin(only male). (4) The wrist breadth is larger Taeumin than Soeumin(only female). (5) The palm length is longer Taeumin than Soyangin(only male). (6) The maximum hand breadth is larger Taeumin than Soeumi (only male). (7) The 2nd, 3rd and 4th finger length is longer Soeumin than Soyangin(only male). (3) The morphologic characteristics of Foot. (1) The foot thickness is thickest in Taeumin. (2) The foot breadth is largest in Taeumin. (3) The ankle circumference is longest in Taeumin(only male).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.4
• /
• pp.696-710
• /
• 2023

This study investigated the problems of Korean female combat uniforms and collected primary data for developing new combat uniforms with improved functionality. We analyzed fit and motion suitability by administering a questionnaire evaluating the current uniforms to 20 Korean female soldiers. The evaluation of fit suitability found that satisfaction with the combat uniforms was generally high. However, short sleeve length, large wrist circumference, small hip circumference, large ankle circumference, and low crotch height were discomfort factors. In the evaluation of motion suitability, dissatisfaction was found with the sleeve circumference, elbow circumference, armhole circumference, knee crease and crotch height, and back waist height during motion. Therefore, it is necessary to establish a more segmented size system that suits the physique of current female soldiers and to devise appropriate solutions for improving motion suitability. This study is meaningful for its evaluation of the current combat uniform of female soldiers, and it is expected to serve as a reference for the future development of military combat uniforms for this group.