• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.526-530
• /
• 1996

In this paper, three different types of commercially tools-P20, NC123K and ceramic-have been used to working austempered ductile iron(ADI). In the austempered condition the materials are hard, strong and difficult to machine. Thus, we selected a optimum tool material among three different types of used tools in machining of austempered ductile iron. It was used acoustic emission(AE) to know cutting characteristic for selected tool and flank wear land of the ceramic too. The obtained results are as follows; (1) The ceramic tool among three different types of tools is the best in machining austempered ductile iron. (2) In case of ceramic tool, the amplitude level of AE signal(AErms) is mainly affected bycutting speed in cutting speed in cutting condition and it is proportioned to cutting speed. (3) There have the relationship of direct proportion between the amplitude level of AE signal and flank wear land of the tool. (4) If it find the value of AErms at each cutting speed, the in-process detection to ceramic tool's wear is possible

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.204-209
• /
• 1998

The acceleration of the performance of machine tools influences the development of the semi-conductor and optical technology as the development of NC and measurement technology. We can mention that a traction role of the acceleration for the development like that depends on the development of the measurement technics Stylus instrument method, STM, SEM, Laser interferometer method which are used for measuring the quasi-static error of machine tools. Because the measurement has been done to unload condition without considering of mechanical stiffness in the case of machining center as we measure the quasi-static error of machine tools on general studies, people who works on the spot has many problems on the data value. Therefor we will help working more accurately on the spot by measuring, analyzing, displaying the deflection of the table and support shaft when we load on the table and the support shaft of machining center using laser interferometer. Also we try to settle new conception of the measurement method and more accurate grasp of the deflection tendency by verifing the tendency of the error measured through the comparison of the simulated error using ANSYS, a common finite element analysis program, which is able to measure heat deformation, material deformation, and error resulted form this study.

• 한국화재조사학회논문지
• /
• 제11권1호
• /
• pp.41-58
• /
• 2008

등불의 발견은 인간 생활에 커다란 변화를 가져 왔으며, 그 역사는 매우 오래되었다. 그러나 비약적으로 발전한 것은 1879년 에디슨이 탄소 필라멘트 진공 전구를 발명하여 조명에 사용하면서 시작되었다고 할 수 있다. 조명은 피로를 덜어주고 안전도를 높이며 사람의 활동 능률을 올리고 즐거운 분위기를 만들어 준다. 그러나 부주의나 관리소홀로 인해 소중한 재산과 인명을 앗아가는 화재의 원인이 되기도 한다. 본 연구에서는 조명등의 구조와 원리를 이해하고 일반가정에서 가장 많이 사용되고 있는 백열전구과 형광등을 중심으로 출화가능성과 조사확인사항에 대하여 발화사례를 중심으로 하여 배선과 가연물 접촉에 의한 사례 및 재현실험을 통하여 논문의 신뢰성을 확보하고자 하였다.

• 산업공학
• /
• 제22권3호
• /
• pp.243-251
• /
• 2009

The driving force of the manufacturing field is members' mind-set and activity. However, there is no appropriate program of change management for workers who work in the manufacturing field. Most of the small group activities were focused on the fixed tools and processes to make improvement only, not the change itself. Therefore, it was difficult to have self generating energy without actually motivating people of change. Study of IFI(Integrated Field Innovation) means change of management. This study will introduces IFI which is a new methodology of change and innovation of workers, and will describe how workers participated in the activities voluntarily. The principle of IFI is that letting employees to find the problems of the sites -anything that makes employees considering as the problem while they are working- and solve those problems through any tools own their own. Workers do not have to waste their time on bounding by unnecessary tools and processes. There are several cases that company "D" has been actually applied the IFI methodology in 2008. Through these cases, IFI proved that it was a optimized methodology for workers who work in the manufacturing field.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.604-613
• /
• 2007

온톨로지의 재사용을 위해 온톨로지를 통합하는 방법에 대한 연구가 진행되친 있다. 그리고 다양한 온톨로지 통합 도구들이 개발되어 사용되고 있다. 그러나 기존의 온톨로지 통한 방법 및 도구는 셋 이상의 온톨로지를 한번에 통합할 수 없으며, 파수의 작업자가 동시에 통합 작업을 할 수 없는 단점이 있다. 본 논문에서는 메타온톨로지를 이용한 온톨로지 통합 프로세스(OntoIntegProcess)를 제안하고, 온톨로지 통합 프로세스에 기반하여 온톨로지 통합 시스템(OntoIS)을 개발한다. 온톨로지의 통합 실험을 통해 제안한 프로세스와 시스템의 효용성을 확인한다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.222-232
• /
• 2024

New modular factory-built methodologies implemented in the construction and industrial plant industries may bring down costs for modular reactors. A factory-built environment brings about benefits such as; improved equipment, tools, quality, shift patterns, training, continuous improvement learning, environmental control, standardisation, parallel working, the use of commercial off shelf equipment and much of the commissioning can be completed before leaving the factory. All these benefits combine to reduce build schedules, increase certainty, reduce risk and make financing easier and cheaper.Currently, the construction and industrial chemical plant industries have implemented successful modular design and construction techniques. Therefore, the objectives of this paper are to understand and analyse the state of the art research in these industries through a systematic literature review. The research can then be assessed and applied to modular reactors.The literature review highlighted analysis methods that may prove to be useful. These include; modularisation decision tools, stakeholder analysis, schedule, supply chain, logistics, module design tools and construction site planning. Applicable research was highlighted for further work exploration for designers to assess, develop and efficiently design their modular reactors.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.73-77
• /
• 2013

Leisure activities alter overland tourism into marine tourism according to a rise in national income. It is expected that the leisure boat with period of introduction in marine tourism will be developed rapidly. It needs to unite with marine technology, optimized layout design, interior design and so on in order to build a yacht of high quality. Because optimized layout design and interior design technique increase the added value of the yacht, it needs to be convergence technology between Ergonomics, Sensibility Ergonomics, and design technique. In this study, we analyzed traffic line of crews in a sailing yacht and assessed working posture using OWAS, RULA and REBA tools. Also we suggested tips of Ergonomic design in the sailing yacht.

• 간호행정학회지
• /
• 제18권4호
• /
• pp.452-459
• /
• 2012

Purpose: This study was a descriptive study conducted to investigate the effects of intellectual capital on organizational performance of nurses in medium and small hospitals. Methods: Data were collected from 241 nurses working in medium and/or small hospitals located in G City from August 10 to September 17, 2011. The measurement tools were the Intellectual Capital scale and Organizational Performance scale. Data were analyzed using frequency, percentage, mean, standard deviation, t-test, one way ANOVA, Pearson correlation, and hierarchical regression with SPSS WIN 18.0 PC. Results: Intellectual capital composed of human, customer, and structure capital had significant effects on organizational performance of nurses working in medium and small hospitals and explained 50.4% of the variance. Conclusion: In order to promote organizational performance of nurses, nursing managers and administrators need to invest more resources into the intellectual capital of the system including human, customer, and structure capital.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.25-34
• /
• 1995

Large-scale low-alloy steel shafts, used in the manufacture of steam turbine, are produced by ingot making, forging and heat treatemtn processes. The numerical analysis techniques are introduced to analyze and design the working conditions in each process. The solidification of a steel ingot is studied through the finite element method. The open die press forging and quenching process are simulated by viscoplastic and elastic-plastic finite element method, respectively. Thus numerical analysis techniques are very useful tools to study favorable working conditions for better and more desirable product quality.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.119-130
• /
• 1998

The purpose of this study is to investigate the safety consciousness of the lobours working at the ship building or repairing yard at which the industrial accidents frequently happen, and to provide the basic data required for the prevention of those accidents. This study is made by analyzing the questionnaires of 208 labours working at various ship building or repairing industries at random. This questionnaire is focused on finding the basic data for prevention of industrial accidents and getting the public opinions and proposals of labours. The results obtained by this study are as follows ; The negative estimations of the labours to the safety are cultivation of safety consciousness, the safety behavior in company, the molters of arrangement and the estimation of industrial or post arrangement. The positive ones are the arrangements of the protective tools and equipments for safety, the rule of safety regulation and the order of works, and the status of health education within company.