• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.750-757
• /
• 2003

In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W$\_$c/t$\^$p/ = B(where W$\_$c/ = $\sigma$$\varepsilon$ is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this Purpose, the creep tests for generating 1.0% strain for commercial type i16 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593$^{\circ}C$. The plots of log W$\_$c/ - log t showed a good linear relation up to 10$\^$5/ hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of isochronous stress-strain curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials.

• 한국직업건강간호학회지
• /
• 제27권1호
• /
• pp.48-58
• /
• 2018

Purpose: The purpose of this study was to understand the present status of the work performance of the construction industry health managers and the developmental direction for the construction industry health management. Methods: The subjects of this study were 149 health managers working in the construction industry. Data of a total of 130 participants were analyzed by excluding the missing data among field workers. The contents of the survey were the characteristics of the workplace, the difficulties and requirements of health management, and the level of job performance. Results: The factors affecting measuring work environment task were age, number of workers, number of safety managers, and lack of support from the headquarters. The factors affecting managing work environment and physicochemical harmful factors were age, type of contract and conflicting business opinions. The factors affecting implementing health examination were age, type of contract, and number of safety managers. The factors affecting healthcare were age, type of contract, number of safety manager, presence of healthcare room, and conflicting business opinions. Conclusion: It is necessary to provide practical guidance and practical resources, and education for strengthening capacity. The support for business owners and managers support is needed.

• 가정간호학회지
• /
• 제24권1호
• /
• pp.69-78
• /
• 2017

Purpose: The purpose of this study was to identify the frequency and duration of primary health practitioners' work, and their job satisfaction, and to confirm differences in work and job satisfaction by type of primary health care post. Methods: Work frequency, duration of work, and job satisfaction were estimated by 371 primary health practitioners. Chi-square test and t-test were used to identify the differences in working patterns and job satisfaction by type of primary health care post. Results: Primary health practitioners were found to spend more time working with the elderly population than with students, pregnant women, children, people with disabilities, and multicultural families. Those in costal areas were more concerned with students than those working inland. In the latter group of practitioners, more time was spent working with patients with chronic diseases, pregnant women, women, children, multicultural families, and mental health clients. Also, the job satisfaction of inland primary health practitioners was significantly higher than that of costal practitioners. Conclusion: It is necessary to identify the characteristics of primary health practitioners' work, focusing on changes in the medical service environment. Furthermore, it is necessary to provide job training according to type of primary health care post, as practitioners' approaches should differ between posts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.351.2-351.2
• /
• 2014

Indium tin oxide (ITO) has a lot of variations of its properties because it is basically in an amorphous state. Therefore, the differences in composition ratio of ITO can result in alteration of electrical properties. Normally, ITO is considered as transparent conductive oxide (TCO), possessing excellent properties for the optical and electrical devices. Quantitatively, TCO has transparency over 80 percent within the range of 380nm to 780nm, which is visible light although its specific resistance is less than $10-3{\Omega}/cm$. Thus, the solar cell is the best example for which ITO has perfectly matching profile. In addition, when ITO is used as transparent conductive electrode, this material essentially has to have a proper work function with contact materials. For instance, heterojunction with intrinsic thin layer (HIT) solar cell could have both front ITO and backside ITO. Because each side of ITO films has different type of contact materials, p-type amorphous silicon and n-type amorphous silicon, work function of ITO has to be modified to transport carrier with low built-in potential and Schottky barrier, and approximately requires variation from 3 eV to 5 eV. In this study, we examine the change of work function for different sputtering conditions using ultraviolet photoelectron spectroscopy (UPS). Structure of ITO films was investigated by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). Optical transmittance of the films was evaluated by using an ultraviolet-visible (UV-Vis) spectrophotometer

• KIEAE Journal
• /
• 제8권1호
• /
• pp.99-104
• /
• 2008

This study surveys the types of form works used for constructing composite basement walls found in domestic construction sites. Based on expert surveys, the research provides criteria for selecting a form work type and cost-benefit analysis for different types of form works. In selecting a form work type, safety was considered the most important factor. It is induced from the survey that a successful construction requires a form work type that could solidly bear the lateral pressure of concrete rather than other types that cut back the cost and shorten the construction period. In the cost-benefit analysis, the benefit was the highest in 'euro-form+soldier system', and the cost was most competent in 'rib-lath+soldier system'. In considering benefit and cost together, 'euro-form+soldier system' was judged to be the best option. This is likely to be attributed to the following reasons: site workers are familiar with euro-forms because it is the most widely used; and, soldier system is more reliable in bearing lateral pressure compared to steel pipes.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.195-202
• /
• 2011

본 연구의 목적은 차종별 교통류 모형을 이용한 편도 2차로 고속도로 공사구간의 용량 값을 산정하는 것이다. 공사구간의 교통류 모형은 공사구간의 유입부 및 유출부를 대상으로 차종별 모형과 승용차 환산계수를 적용한 전체 차량에 대한 모형으로 도출하였다. 차종별 모형에서 산정된 최대교통류율은 승용차환산계수 및 중차량 비율을 적용하여 공사구간의 용량 값으로 전환하였다. 차종별 모형의 유입부 및 유출부 최대교통류율 값은 각각 1,845pcphpl과 1,884pcphpl로 산정되었으며 차량 전체를 대상으로 한 모형의 최대교통류율은 차종별 결과보다 높게 분석되었다. 모형의 비교 검증을 위하여 최대밀도에 따른 거리 차두간격을 적용하였다. 공사구간의 용량은 공사구간의 흐름이 안정된 유출부 용량보다 공사구간 진입을 위한 차선 변경 등으로 교통흐름이 원활하지 못한 유입부 용량에 좌우되므로 유입부 교통류 모형의 최대교통류율 값인 1,800pcphpl을 편도 2차로 고속도로 공사구간 용량 값으로 산정하였다.

• 비교문화연구
• /
• 제33권
• /
• pp.193-239
• /
• 2013

A photograph, which was applied to contemporary art, plays a very important role in the whole of the multiplied and diversified contemporary arts today. The application of photos, which were shown in contemporary art following the 1950s, can be classified into five types according to role and function of a photo in the process of developing a work. However, this classification is shown a little ambiguously. That is because photos of being utilized by artists are indicated very diversely depending on their artistic strategy and situation. As the first type, a few painters utilize a photo as mirror of reality in order to materialize a challenging and revolutionary idea with going against traditional picture in their pictorial practice. As the second classification, especially American painters utilize a photo as material component of forming their picture like photo-montage or collage. The combined application of this medium is first doing genre de-construction and hybridization of post-modernism in the 1980s while ultimately aiming at social criticism or political satire. The third type implies particularly a case that avant-garde artists utilize a photo as evidence of a work. In this case, a photo is employed as evidence of a work, which disappears in the temporal space essentially like body art, land art, and performance. Also, as the fourth type is a case of utilizing a photo for artistic concept of a work, not pictorial practice of picture, it is utilized often as important artistic strategy of conceptual artists. The final type of utilizing photo is a case of applying photo as formative tool on behalf of dye-stuffs or crayon in order to record a section of reality, which always continues regardless of event or meaning any more, in the traditional picture. In this case, a work is indicated as a photo of having a form of picture, namely, as Forme-tableau. The main subject is indicated there as a daily case of being repeated always the extremely common and revived theme.

• 한국실내디자인학회논문집
• /
• 제20호
• /
• pp.91-97
• /
• 1999

Telecommuting becomes a new form of work according to the development of information technology. Therefore, the purpose of this study is to provide basic data for the interior space planning of telecommuting centers by means of surveying office workers' opinions. The major findings of this research are as follows. The opinion about whether to use telecommuting center if provided is showed highly positively. In the matter of space type of telecommuting center, 'mixing type I (open plan office but division with high partition)' is the most preferred, the next, is 'closed type'. The most preferred type of workstation is 'independent type', the next is 'X type' and the third is 'link type'. Preferred partition height is '1,300-1,500mm'. When planning telecommuting center, the most important element of space plan is 'size and layout of workstation' and the second is 'private space for confidential work'. In public workplace, the most important element 'refreshment space', and the second one is 'mailing system'.

• Architectural research
• /
• 제16권2호
• /
• pp.75-80
• /
• 2014

Risks, uncertainties, and associated cost overruns are critical problems for construction projects. Cost contingency is an important funding source for these unforeseen events and is included in the base estimate to help perform financially successful projects. In order to predict more accurate contingency, many empirical models using regression analysis and artificial neural network method have been proposed and showed its viability to minimize prediction errors. However, categorical factors on contingency cannot have been treated and thus considered in these empirical models since those models are able to treat only numerical factors. This paper identified potential factors on contingency in transportation construction projects and evaluated categorical factors using the one-way ANOVA statistical method. Among factors including project work type, delivery method type, contract agreement type, bid award type, letting type, and geographical location, two factors of project work type and contract agreement type were found to be statistically important on allocating cost contingency.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.7-12
• /
• 2008

We constructed Seal type waterproofing with adhesive and swelling properties in the field of construction work as yet. But we have many problems of seal type waterproofing with adhesive and swelling properties for construction. Because it has high viscosity, so wokers are too adhered for the work. So, we developed and applied about the high temperature and spray equipments of piston type better than before. We able to be expect that cost reduction and increase construction ability by high temperature and spray equipments of piston type.