• Journal of Construction Engineering and Project Management
• /
• v.5 no.1
• /
• pp.40-46
• /
• 2015

This study presents the results of our analysis and recommendations for process and productivity improvements. The project studied consists of a 5-story research building, with a structure of steel frames supporting concrete slabs. The observations focused on the analysis of the overall erection and framing process. The methods used for the analysis consisted in intensive visits on site, where construction processes were observed in term of resources, activities, durations, materials' handling procedures, and technology used. Back to the office, authors used the information captured to model the different trades' activities, using work sampling and 5-minute rating technique. The work sampling provides insight into the activity, hence allowing for process improvements. The productivity of various trades is strongly dependent on the organization of the work process and work site conditions. Improving the productivity of the entire project or company is not possible until everyone is committed to improvement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1053-1061
• /
• 2017

The study is concerned with providing the improvement method on making a reasonable and scientific decision on the damages accrued from the bid rigging in the construction work. According to the review on the precedent studies and decision cases on the damages caused by bid rigging, the representative problems include the insufficiency of the classification system on the damage calculation method and the omission of the necessary stage in the damage determination process. First, the improved classification system on calculating the damages caused by bid rigging is presented with the application to the bid rigging in the construction work by adding the ratio factor in addition to the damage calculation parameters such as price and cost. Second, the standard procedures organized with six stages is presented as the process required for determining the damages if the indemnification for bid rigging is claimed. The study becomes the foundation for resolving the problem with the undue burden on a party and for preventing the opportunity loss by resolving a dispute early through the improvement classification system and standard procedures presented in the study.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.130-143
• /
• 2015

By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.168-169
• /
• 2021

Maintenance is carried out over a long period of time, and various documents are utilized in the maintenance work. In maintenance work which is progressed simultaneously in a short period of time, it is important to provide relevant information to the parties in a timely manner. As the types of work increase, manager needs more time and effort to select and utilize the documents. It is necessary to have an information system that supports the person in charge by grasping work procedures for each construction and providing the necessary documents and information for that step. This paper proposes an process based nexus model that can provide necessary documents to the parties to the work steps by linking the maintenance work process and BIM. Through the nexus model presented, manager can efficiently acquire the necessary documents and utilize them for the construction works currently being carried out.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.417-420
• /
• 1998

A heuristic sweeping algorithm for an autonomous smearing robot which executes the area filling task is proposed. This algorithm searches tracking points with the obstacle andenvironment wall while the robot tracking whole workspace, and finds sequential tracking line by sequentally connecting the tracking points in such a way that (1) the line should be never crossed, (2) the total tracking points should be is linked as short as possible, and (3) the tracking link should be cross over the obstacle in the work-space. If the line pass through the obstacle, hierarchical collision free algorithm proposed is implied. The proposed algorithm consists of (1) collision detection procedure, (2) obstacle map making procedures, (3) tracking points generation procedures for subgosls, (4) tracking points scanning procedures, and (5) obstacle avoidance procedure.

• Structural Engineering and Mechanics
• /
• v.13 no.4
• /
• pp.429-436
• /
• 2002

The current work presents an analysis algorithm for the modal analysis for the dynamic behaviors of offshore structures with concepts of mass perturbation influence term. The mass perturbation concept by using the term, presented in this paper offers an efficient solution procedure for dynamical response problems of offshore structures. The basis of the proposed method is the mass perturbation influence concepts associated with natural frequencies and mode shapes and mass properties of the given structure. The mathematical formulation of the mass perturbation influence method is described. New solution procedures for dynamics analysis are developed, followed by illustrative example problems, which deal with the effectiveness of the new solution procedures for the dynamic analysis of offshore structures. The solution procedures presented herein is compact and computationally simple.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.77-83
• /
• 2006

The purpose of this study is to assess the organizational personality types, employee-organization fits and the job satisfaction/involvement in a Korea standard nuclear power plant(NPP), which is a representative safety work place. First we chose 427 procedures that are related to safety out of 777 officially managed procedures referenced by 13.5 of FSAR(final safety analysis report). Next, we finally chose 70 procedures of 8 divisions for 44 employees regarding the duties for NPPs' division, experiences of operations, an operational know-how, and the indication of operational weakness. This study used OPTI(organizational personality type indicators) and the combination of 4 preference types for determining the organizational personality to produce personality types of organizations for NPPs' division. To assess the job satisfaction and involvement, we used a questionnaire and an interview, for 300 employees(83.5%) of the Korea standard NPP.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.358-394
• /
• 1995

The author studied the actual conditions on the production of dental prosthesis made in laboratories, and also studied interrelationships between dentists and laboratory technicians in both personal and technical aspects. Two hundred-eighty four technicians, work in dental laboratories presently, were surveyed via mail and direct contact during the period from June 1 to June 30 and August 27 to August 28 in 1994 respectively. The obtained results were as follows : 1. Among the respondents, 90.5% we re working in commercial dental laboratories and their laboratories were mainly located in the Seoul area(40.9%, P<0.05). The numbers of employees in these laboratories were less than 10 persons(70.0%, P<0.01), and 75.9% of these laboratories have been in operation less than 15 years. 2. Most laboratory procedures were accomplished according to established disciplines. However, procedures such as die trimming in fixed restorations and the qualifications of the people designing removable partial dentures were not. Other problem areas were boxing of the working cast, the person determining the posterior palatal seal area, selection and arrangement of artificial teeth, occlusion rim correction and laboratory remounting of the processed denture in complete denture restorations. 3. Only half of the requesting dentists could send work authorizations to the laboratories with their work and even so, its contents were quite lacking. Consequently, there must be some standards in writing work authorization. 4. Technicians most desired clean and accurate impressions in fixed and removable dentures, and enough tooth reduction in porcelain fused to metal restorations. 5. For the establishment of better relationships between dentist and dental technician, the respondents desired the establishment of equal footing first(33.5%), and frequent conversations and muture understanding second(25.9%).

• Journal of Korean Neurosurgical Society
• /
• v.60 no.1
• /
• pp.47-53
• /
• 2017

Objectives : The Korean Resource Based Relative Value Scale (K-RBRVS) was introduced in 2001 as an alternative of the previous medical fee schedule. Unfortunately, most neurosurgeons are unfamiliar with the details of the K-RBRVS and how it affects the reimbursement rates for the surgical procedures we perform. We summarize the K-RBRVS in brief, and discuss on how the relative value (RV) of the spinal neurosurgical procedures have changed since the introduction in 2001. Methods : We analyzed the change of spinal procedure RVs since 2001, and compared it with the change of values in the brain neurosurgical procedures. RVs of 88 neurospinal procedures on the list of K-RBRVS were analyzed, while 24 procedures added during annual revisions were excluded. Results : During the past 15 years, RVs for spinal procedures have increased 62.8%, which is not so different with the cumulative increase of consumer prices during this time period or the increase rate of 92.3% for brain surgeries. When comparing the change of RVs in more complex procedures between spinal and brain neurosurgery, the increase rate was 125.3% and 133%, respectively. Conclusion : More effort of the society of spinal surgeons seems to be needed to get adequate reimbursement, as there have been some discrimination compared to brain surgeons in the increase of RVs. And considering the relative underestimation of spinal neurosurgeons' labor, more objective measures of neurospinal surgeons' work and productivity should be developed for impartial reimbursement.

• Journal of Technologic Dentistry
• /
• v.2 no.1
• /
• pp.51-53
• /
• 1980

앞에서 말씀드린 기술은 가철식 국부의치 하부구조(removable partial denture frame work)를 구강 내에 맞추기 전에 master cast에 맞추는 것을 기술한 것이다. 이 과정에서는 본 하부구조(frame work)의 외형을 유지하며 적합성을 높이는 것에 중점을 두어야 한다. 또한 제거된 금속의 양은 모형(cast)이 긁히지 않게 하기 위한 것이며, master cast 위에 주조체를 안착시키기에 필요한 양 만큼이어야 한다. 주조체의 치아 접촉면의 적합이 끝나면 가벼운 압박을 주며 광택을 낸다. 이러한 과정이 기공소에서 주의깊게 완수되면 치과의사는 하부구조를 최소한 짧은 시간에 구강 내에 맞출 수 있게 된다(그림 7).