• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.

• The Korean Journal of Archival Studies
• /
• no.35
• /
• pp.161-206
• /
• 2013

'Maeul' is a concept connoting a community. As a place where ordinary people's lives are planned and realized, Maeul is the foundation of their daily lives as well as a place where they work, rest and enjoy pastime activities. In Korea, however, most Maeul communities are dismantled while going though the modern period representing colonization and developmental dictatorship. Growth-oriented industrialization and urbanization turned into such adverse effects as individualization, a sense of loss and a sense of alienation. Recently, through innovations from below, Maeuls are restored, and through Maeul communities restored this way, every Maeul and many researchers carry out activities to build a healthy civil society. This study was conducted on such a background. For a healthy restoration of Maeul communities and a sustainable operation of those communities, it is necessary to establish archives where record the trace of Maeul members' daily lives and relations between those members. The archive of Maeul communities is a place that contains each Maeul's local characteristics as well as human relations as well. It is because this place can be space where Maeul members can record their history, communicate with each other and make a better future. The archive of Maeul communities can be made into various different models, which can be operated by reflecting the identity of a community such as main agents and characteristics, objectives and orientation of objects recorded. Rather than when Maeul communities exist as individuals, they can display more important functions and better effect when they form a network. Therefore, it is needed to provide various and creative methodologies different from the existing government-led record management. Not only on the form of archives, but also all over their functions, such as collection, arrangement, classification, evaluation, management and utilization, Maeul and Maeul residents' norms, orientation and realistic conditions should be thoroughly reflected. Starting from a chance to look back at individuals' lives, the archive of Maeul communities will be a new chapter to restore and build a healthy community in our society and overcome social contradictions from below. Moreover, the archive of Maeul communities has a great significance that it will broaden its prospect creatively with a new paradigm, not only mechanically turning the existing public sector-centered record management into a non-governmental sector.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.130-153
• /
• 2020

Using stylistic analysis and historical documents, this paper examines the production details of images enshrined in Myeongbujeon (Hall of the Underworld) at Magoksa Temple in Gongju, focusing on the wooden seated Ksitigarbha Bodhisattva and the stone Ten Kings of Hell. Inside Myeongbujeon, the wooden seated Ksitigarbha Bodhisattva is placed at the center, flanked by standing images of Mudokgwiwang and Domyeong-jonja, with images of the Ten Kings and their attendants along the walls. All of these images were transferred to Magoksa Temple in the latter half of the 1930s. The wooden seated Ksitigarbha Bodhisattva came from Jeonghyesa Temple in Cheongyang, the other sculptures came from Sinheungsa Temple in Imsil, and a painting of the Ten Kings came from Jeongtosa Temple in Nonsan. The wooden seated Ksitigarbha Bodhisattva is known to have been produced in 1677, around the same time as the stone sculptures of the Ten Kings. A close analysis of the details of the bodhisattva sculpture-including the facial features, body proportions, and drapery characteristics-strongly suggests that it was produced in the 1620s or 1630s by the monk sculptor Suyeon (who was active in the early half of the seventeenth century) or his disciples. In particular, the rendering of the drapery on the lower half of the body closely resembles Buddhist sculptures produced by Suyeon that are now enshrined at Bongseosa Temple in Seocheon (produced in 1619) and at Sungnimsa Temple in Iksan (produced at Bocheonsa Temple in Okgu in 1634). According to the votive inscription, the stone sculptures of the Ten Kings and their attendants were produced in 1677 under the supervision of the monk sculptor Seongil. However, these are the only known Buddhist images produced under Seongil, and no details about other monks involved in the production have ever been found, making it difficult to speculate about their lineage. Historical records do suggest that Seongil worked on other projects to produce or repair sculptures with disciples of the monk sculptors Hyehi or Unhye, indicating amicable relations between the two groups. Unlike most such images in the Honam or Yeongseo regions, the Ten Kings at Magoksa Temple are made from stone, rather than wood or clay. Also, the overall form and the drapery conform to statues of the Ten Kings that were popularly produced in the Yeongnam region. Thus, the images are believed to be the work of monks who were primarily active in Yeongnam, rather than Honam. In the future, a systematic investigation of wooden seated Ksitigarbha Bodhisattva images and stone Ten Kings of Hell images produced in the Chungnam region could illuminate more details about the production of the images at Magoksa Temple, and perhaps shed light on the conditions that led to the production of stone Buddhist sculptures in the Honam area during the late seventeenth century.

• Journal of Intelligence and Information Systems
• /
• v.27 no.2
• /
• pp.1-15
• /
• 2021

If it is difficult for us to make decisions, we ask for advice from friends or people around us. When we decide to buy products online, we read anonymous reviews and buy them. With the advent of the Data-driven era, IT technology's development is spilling out many data from individuals to objects. Companies or individuals have accumulated, processed, and analyzed such a large amount of data that they can now make decisions or execute directly using data that used to depend on experts. Nowadays, the recommender system plays a vital role in determining the user's preferences to purchase goods and uses a recommender system to induce clicks on web services (Facebook, Amazon, Netflix, Youtube). For example, Youtube's recommender system, which is used by 1 billion people worldwide every month, includes videos that users like, "like" and videos they watched. Recommended system research is deeply linked to practical business. Therefore, many researchers are interested in building better solutions. Recommender systems use the information obtained from their users to generate recommendations because the development of the provided recommender systems requires information on items that are likely to be preferred by the user. We began to trust patterns and rules derived from data rather than empirical intuition through the recommender systems. The capacity and development of data have led machine learning to develop deep learning. However, such recommender systems are not all solutions. Proceeding with the recommender systems, there should be no scarcity in all data and a sufficient amount. Also, it requires detailed information about the individual. The recommender systems work correctly when these conditions operate. The recommender systems become a complex problem for both consumers and sellers when the interaction log is insufficient. Because the seller's perspective needs to make recommendations at a personal level to the consumer and receive appropriate recommendations with reliable data from the consumer's perspective. In this paper, to improve the accuracy problem for "appropriate recommendation" to consumers, the recommender systems are proposed in combination with context-based deep learning. This research is to combine user-based data to create hybrid Recommender Systems. The hybrid approach developed is not a collaborative type of Recommender Systems, but a collaborative extension that integrates user data with deep learning. Customer review data were used for the data set. Consumers buy products in online shopping malls and then evaluate product reviews. Rating reviews are based on reviews from buyers who have already purchased, giving users confidence before purchasing the product. However, the recommendation system mainly uses scores or ratings rather than reviews to suggest items purchased by many users. In fact, consumer reviews include product opinions and user sentiment that will be spent on evaluation. By incorporating these parts into the study, this paper aims to improve the recommendation system. This study is an algorithm used when individuals have difficulty in selecting an item. Consumer reviews and record patterns made it possible to rely on recommendations appropriately. The algorithm implements a recommendation system through collaborative filtering. This study's predictive accuracy is measured by Root Mean Squared Error (RMSE) and Mean Absolute Error (MAE). Netflix is strategically using the referral system in its programs through competitions that reduce RMSE every year, making fair use of predictive accuracy. Research on hybrid recommender systems combining the NLP approach for personalization recommender systems, deep learning base, etc. has been increasing. Among NLP studies, sentiment analysis began to take shape in the mid-2000s as user review data increased. Sentiment analysis is a text classification task based on machine learning. The machine learning-based sentiment analysis has a disadvantage in that it is difficult to identify the review's information expression because it is challenging to consider the text's characteristics. In this study, we propose a deep learning recommender system that utilizes BERT's sentiment analysis by minimizing the disadvantages of machine learning. This study offers a deep learning recommender system that uses BERT's sentiment analysis by reducing the disadvantages of machine learning. The comparison model was performed through a recommender system based on Naive-CF(collaborative filtering), SVD(singular value decomposition)-CF, MF(matrix factorization)-CF, BPR-MF(Bayesian personalized ranking matrix factorization)-CF, LSTM, CNN-LSTM, GRU(Gated Recurrent Units). As a result of the experiment, the recommender system based on BERT was the best.

• Journal of Popular Narrative
• /
• v.26 no.3
• /
• pp.123-160
• /
• 2020

Manga develops by reflecting a change of society, reader's needs, and their thoughts and changes of tastes, sensitively. Shojo manga and Jyosei manga also do. We can find several kinds of meaningful changes in Japanese Jyosei manga in the 2010s. The works which represent preciousness of daily life, women's narrative and self-realization are gradually increasing. In addition, the works that deal with very touchy issues such as sex discrimination at work, sexual harassment begin to emerge. It has never been found in the manga of the former era. While this paper analyzes the social and cultural causes of these changes of the works that exclude romance and treat gender issues focusing on recent works, it examines changes of Japanese Jyosei manga in the 2010s and their meanings. I investigate the current trends of Japanese Jyosei manga in the 2010s through Umimachi Diary that represents a precious everyday life with woman-centered narrative, Metamorphose no engawa that deals with women's story from a new perspective, Good-bye My Miniskirt that tackles gender issues. Furthermore I intensively analyze how Nagi's Long Vacation and Darucyan, which win popularity from women in their 20s~30, represent lives and troubles of contemporary Japanese women. Nagi's Long Vacation represents the heroine's quest for a self throwing everything out. While Darucyan deals with self-realization, it forms of a bond of sympathy of readers by representing the heroine who suffers sexual harassment and inequal conditions very realistically. Nagi's Long Vacation and Darucyan have something in common with portraying troubles and self-realization of the working women in their 20s based on a indigenous reality to Japanese society very realistically. However they are unusual in that it is different from the manga of the former era in dealing with heroine's troubles and their solutions. The most distinctive changes of Jyosei manga since 2010 are that real issues surfaced with social changes. In addition, these social contradictions result from irrational discriminations and old customs of Japanese society for a long time. Manga reflects subtly the portraits of the times, their images of women, and their values. These changes of Jyosei manga also show the concerns of readers at that time, and it means that women began to be aware of the issues.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.576-585
• /
• 1991

General procedures of seed preparation as conventional guide had been established in China before most of Korean literature documented them. ‘Chwijongbeob’ (method of seed select) was to select good quality of seeds and to discard the rest. In ‘Seonjongbeob’ (method of seed grading) although China employed only ‘Sooseonbeob’ (method of seed select with water), but seeds were selected in order of selection of seeds by winds, selection of seeds by sieve and selection of seed with water in Korea. As compared with the recent techniques, those methods were perfect techniques for selection of good quality seeds of rice, except for method of seed selection by salt water was developed. The method for measurement of seed moisture, and for measurement of melted snow, spoiled urine and extracted juice by boiling water with the bone of livestock were originated from ancient China. The farming books in Korea were more or less followed the above methods. However, these techniques were complicated and impractical interms of validity and rationality. Also, it is judged that these tchniques are more appropriate in dry areas and alkaline soil of China rather than in Korean conditions. The plowing is a work to begin farming, and is operated for air ventilation between atmosphere and earth. Also, this techniques was adopted in the farming books from the early to the late Chosun dynasty without changes. Fields were deep-plowed in the first, in fall (or in spring) and for cultivation, and were shallow -plowed in the second, in spring (or in summer) and in intertillage. The former was for water reserve and land preparation, and the later was for weed control with intertillage. However, plowing in fall which was different from fallowing in dry areas, was recommended in Korea (Jikseol). but was not practiced in Sejongsilrok. This was changed with time, and plowing for cultivation in Korea was interrelated with use of green manure crops, method of plowing of upseting plough, method of manure practice and sometimes dry plowing. In addition, until the 15th century method of using a kind of plowing-tool made of log as farm tools was created to support reclamation for enlargement of farm land in mountaineous and coastal areas. For desolate farm lands by many internal and external disturbances, one tried to recover yield ability by increasing labor productivity from the 17th or 18th century. To do this, ‘Banjongbeob’ (culture method by upset plowing weed control) and ‘Hwanubeob’(culture method by firing weed control) which were cultural methods of ancient China were readapoted but the results were not clearly informed. Also, the reality of those was reexamined in the end of the Chosun dynasty.

• Journal of International Area Studies (JIAS)
• /
• v.14 no.2
• /
• pp.499-524
• /
• 2010

The purpose of this study is to based on review of theoretical and empirical studies to assess the independence of central banks - the former Socialist republics, including the Russian Federation and Czech, Poland. In addition, the work is expected to clarify whether a link exists between independence and the most important economic indicators such as inflation, economic activity, the budget deficit. And The subject of this study are the formal and actual independence of national banks, as well as limiting factors: political and economic. Background investigation of the problem of independence of central banks from the fact that, according to many economists, it is essential to the successful development of a market economy. The effectiveness of any country's economy due to currency volatility, low inflation, high reliability of the banking system, etc. As far as the independence of monetary regulation contributes to these goals - one of the most actively debated issues in the world of economic theory and practice for a long time. The issue of central bank independence is extremely important for Russia, Czech, Poland. In the near future to the central bank has important tasks, among which are the transition to inflation targeting in the rejection of significant intervention in the foreign exchange market, as well as improving the sustainability of the national banking system. Transparency and independence of the Bank of Russia, Czech Republic, Poland, in my view, should be an important factor in achieving these goals. The countries of Czech Republic, Poland have already made a number of steps to bring the status of their banks to the European standards. Many other developing countries are also in the process of reforming their central banks and the improving conditions of their functioning. However, despite the fact that as a model for reform used by the central banks of countries with developed market economies, central banks in developing countries are still yet deprived of the legal, economic and political independence. A different situation exists in transition space. Because of significant differences in the views of the authorities in transition republics at the necessary level of independence of central banks and the exchange rate and monetary policy reform of monetary management in these countries led to different results.

• Korean Journal of Animal Reproduction
• /
• v.24 no.3
• /
• pp.255-262
• /
• 2000

The aim of this work was to study the effects of ascorbic acid (Asc) and/or ferrous sulfate (Fe$^{2+}$) and spernatozoa preincubation on the in vitro fertilization in porcine. Porcine follicular oocytes matured in culture were inseminated with frozen-thawed boar spermatozoa preincubated for 0, 1, 2, 3, 4 and 5h. The penetration rates (37~51%) were not significantly different between durations of spermatozoa preincubation in medium with 0.1 mM Asc. The addition of 1.0 mM Fe$^{2+}$ during spermatozoa preincubation were not significantly affecting the penetration rates (41~56%). When spermatozoa were preincubated with Asc and Fe$^{2+}$, the penetration rates had a tendency to increase with time of spermatozoa preincubation, and were significantly (P<0.05) higher in spermatozoa preincubated with that than without Asc and Fe$^{2+}$ for 5 h. On the other hand, when spermatozoa were preincubated in fertilization medium without Asc and/or Fe$^{2+}$, the penetration rates were significantly (P<0.05) higher in medium with Fe$^{2+}$ than with Asc or Asc and Fe$^{2+}$ for in vitro fertilization. The rate of polyspermy in penetrated oocytes in medium with Asc and Fe$^{2+}$ decreased with the period of spermatozoa preincubation. Despite different culture conditions for spermatozoa preincubation, no differences were observed in polyspermy rates in the presence of Asc and/or Fe$^{2+}$ These results indicate the advantage of preincubating spermatozoa with Asc and Fe$^{2+}$ and an addition of Fe$^{2+}$ during in vitro fertilization with spermatozoa preincubated maintain penetration potential without increased polyspermy rates on in vitro fertilization in porcine oocytes.on in porcine oocytes.

• Asia Marketing Journal
• /
• v.15 no.4
• /
• pp.61-101
• /
• 2014

This study investigates when and how disagreements in online customer ratings prompt more favorable product evaluations. Among the three metrics of volume, valence, and variance that feature in the research on online customer ratings, volume and valence have exhibited consistently positive patterns in their effects on product sales or evaluations (e.g., Dellarocas, Zhang, and Awad 2007; Liu 2006). Ratings variance, or the degree of disagreement among reviewers, however, has shown rather mixed results, with some studies reporting positive effects on product sales (e.g., Clement, Proppe, and Rott 2007) while others finding negative effects on product evaluations (e.g., Zhu and Zhang 2010). This study aims to resolve these contradictory findings by introducing preference heterogeneity as a possible moderator and causal attribution as a mediator to account for the moderating effect. The main proposition of this study is that when preference heterogeneity is perceived as high, a disagreement in ratings is attributed more to reviewers' different preferences than to unreliable product quality, which in turn prompts better quality evaluations of a product. Because disagreements mostly result from differences in reviewers' tastes or the low reliability of a product's quality (Mizerski 1982; Sen and Lerman 2007), a greater level of attribution to reviewer tastes can mitigate the negative effect of disagreement on product evaluations. Specifically, if consumers infer that reviewers' heterogeneous preferences result in subjectively different experiences and thereby highly diverse ratings, they would not disregard the overall quality of a product. However, if consumers infer that reviewers' preferences are quite homogeneous and thus the low reliability of the product quality contributes to such disagreements, they would discount the overall product quality. Therefore, consumers would respond more favorably to disagreements in ratings when preference heterogeneity is perceived as high rather than low. This study furthermore extends this prediction to the various levels of average ratings. The heuristicsystematic processing model so far indicates that the engagement in effortful systematic processing occurs only when sufficient motivation is present (Hann et al. 2007; Maheswaran and Chaiken 1991; Martin and Davies 1998). One of the key factors affecting this motivation is the aspiration level of the decision maker. Only under conditions that meet or exceed his aspiration level does he tend to engage in systematic processing (Patzelt and Shepherd 2008; Stephanous and Sage 1987). Therefore, systematic causal attribution processing regarding ratings variance is likely more activated when the average rating is high enough to meet the aspiration level than when it is too low to meet it. Considering that the interaction between ratings variance and preference heterogeneity occurs through the mediation of causal attribution, this greater activation of causal attribution in high versus low average ratings would lead to more pronounced interaction between ratings variance and preference heterogeneity in high versus low average ratings. Overall, this study proposes that the interaction between ratings variance and preference heterogeneity is more pronounced when the average rating is high as compared to when it is low. Two laboratory studies lend support to these predictions. Study 1 reveals that participants exposed to a high-preference heterogeneity book title (i.e., a novel) attributed disagreement in ratings more to reviewers' tastes, and thereby more favorably evaluated books with such ratings, compared to those exposed to a low-preference heterogeneity title (i.e., an English listening practice book). Study 2 then extended these findings to the various levels of average ratings and found that this greater preference for disagreement options under high preference heterogeneity is more pronounced when the average rating is high compared to when it is low. This study makes an important theoretical contribution to the online customer ratings literature by showing that preference heterogeneity serves as a key moderator of the effect of ratings variance on product evaluations and that causal attribution acts as a mediator of this moderation effect. A more comprehensive picture of the interplay among ratings variance, preference heterogeneity, and average ratings is also provided by revealing that the interaction between ratings variance and preference heterogeneity varies as a function of the average rating. In addition, this work provides some significant managerial implications for marketers in terms of how they manage word of mouth. Because a lack of consensus creates some uncertainty and anxiety over the given information, consumers experience a psychological burden regarding their choice of a product when ratings show disagreement. The results of this study offer a way to address this problem. By explicitly clarifying that there are many more differences in tastes among reviewers than expected, marketers can allow consumers to speculate that differing tastes of reviewers rather than an uncertain or poor product quality contribute to such conflicts in ratings. Thus, when fierce disagreements are observed in the WOM arena, marketers are advised to communicate to consumers that diverse, rather than uniform, tastes govern reviews and evaluations of products.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.spc
• /
• pp.107-122
• /
• 2003

The object of this study is to evaluate the prevailing physical and psychosocial conditions regarding occupational low back injury. This study consists of two parts. In the first part of the study, analytic biomechanical model and NIOSH guidelines are applied to evaluate risk levels of low back injury for automobile assembly jobs. Total of 246 workers are analysed. There are 20 jobs having greater back compressive forces than 300kg at L5/S1. Also, there are 44 jobs over Action Limit with respect to 1981 NIOSH guidelines. The relationship between psychosocial factors and low back injury was examined in the second part of the study. A battery of questionnaires concerning the psychosocial stress based on PWI (Psychosocial Well-being Index) and musculoskeletal pain symptoms at low back was completed by 246 workers at the same plant. Results showed that 207 out 246 workers experienced the symptoms and 27 workers were diagnosed as patients. Two groups(low stressed, high stressed) based on PWI score had no significant relationships with both symptoms and results of diagnosis. The relationships between physical work load and psychosocial stress were also analysed. Specifically, some postural factors(vertical deviation angle of forearm, horizontal deviation angle of upperarm, vertical deviation angle of thigh, etc) were highly correlated with psychosocial stress. The results illustrated that PWI scores were associated with some physical workloads. However, psychosocial stress levels couldn't be well related with the pain symptom as well as the actual incidence of low back injury since pain or discomfort regarding low back injury were more complex than that of other musculoskeletal disorders.