• Title/Summary/Keyword: wooden structure

Search Result 303, Processing Time 0.027 seconds

A Study on the Flexural Capacity of Wooden Member According to the Reinforcement Ratio of Synthetic Resin (합성수지의 보강비율에 따른 목재의 휨 보강 성능에 관한 연구)

  • Kang, Ho-Geun
    • Journal of Korean Association for Spatial Structures
    • /
    • v.17 no.3
    • /
    • pp.91-98
    • /
    • 2017
  • Most of the cultural assets in Korea are wooden structures. Due to the material characteristics of wood, the preservation of traditional wooden structure is impossible by simple maintenance. Damaged member is replaced with new member or completely dissolve and restore them. But member has a cultural value, so that it is impossible to arbitrarily replace each member. Although the preservation treatment method using synthetic resin is emphasized, there is no exact standard for proper reinforcement ratio. This paper is experimental study for reinforcement ratio of wooden flexural member with synthetic resins, Reinforced ratio on section area of flexural member. As a result, synthetic resin reinforcement are selected as experimental variables by proper ratio enhanced flexural capacity of reinforced wooden member than new wooden member.

Study on Safety Evaluation of Traditional Wooden Structure (전통목조의 안정성 평가에 대한 연구)

  • Kim Nam-Hee;Hong Sung-Gul;Bae Byoung-Sun;Jung Sung-Jin;Lee Young-Wook;Hwang Jong-Kuk
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2006.04a
    • /
    • pp.413-420
    • /
    • 2006
  • There are many Korean traditional wooden structures that have resisted successfully over more than several hundred years. However, their structural behavior is not known in engineering context yet. It is then difficult to predict how they behave against various loadings if they face. This paper is to attempt to investigate structural performance of the wooden structures using fuzzy concepts rather than definitely defined engineering formula. The fuzzy synthetic theory to a scoring method enables us to draw a representative and comprehensive value from individual quantity.

  • PDF

A Study on the Architecture of the Original Nine-Story Wooden Pagoda at Hwangnyongsa Temple (황룡사 창건 구층목탑 단상)

  • Lee, Ju-heun
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.2
    • /
    • pp.196-219
    • /
    • 2019
  • According to the Samguk Yusa, the nine-story wooden pagoda at Hwangnyongsa Temple was built by a Baekje artisan named Abiji in 645. Until the temple was burnt down completely during the Mongol invasion of Korea in 1238, it was the greatest symbol of the spiritual culture of the Korean people at that time and played an important role in the development of Buddhist thought in the country for about 700 years. At present, the only remaining features of Hwangnyongsa Temple, which is now in ruins, are the pagoda's stylobate and several foundation stones. In the past, many researchers made diverse inferences concerning the restoration of the original structure and the overall architecture of the wooden pagoda at Hwangnyongsa Temple, based on written records and excavation data. However, this information, together with the remaining external structure of the pagoda site and the assumption that it was a simple wooden structure, actually suggest that it was a rectangular-shaped nine-story pagoda. It is assumed that such ideas were suggested at a time when there was a lack of relevant data and limited knowledge on the subject, as well as insufficient information about the technical lineage of the wooden pagoda at Hwangnyongsa Temple; therefore, these ideas should be revised in respect of the discovery of new data and an improved level of awareness about the structural features of large ancient Buddhist pagodas. This study focused on the necessity of raising awareness of the lineage and structure of the wooden pagoda at Hwangnyongsa Temple and gaining a broader understanding of the structural system of ancient Buddhist pagodas in East Asia. The study is based on a reanalysis of data about the site of the wooden pagoda obtained through research on the restoration of Hwangnyongsa Temple, which has been ongoing since 2005. It is estimated that the wooden pagoda underwent at least two large-scale repairs between the Unified Silla and Goryeo periods, during which the size of the stylobate and the floor plan were changed and, accordingly, the upper structure was modified to a significant degree. Judging by the features discovered during excavation and investigation, traces relating to the nine-story wooden pagoda built during the Three Kingdoms Period include the earth on which the stylobate was built and the central pillar's supporting stone, which had been reinstalled using the rammed earth technique, as well as other foundation stones and stylobate stone materials that most probably date back to the ninth century or earlier. It seems that the foundation stones and stylobate stone materials were new when the reliquaries were enshrined again in the pagoda after the Unified Silla period, so the first story and upper structure would have been of a markedly different size to those of the original wooden pagoda. In addition, during the Goryeo period, these foundation stones were rearranged, and the cover stone was newly installed; therefore, the pagoda would seem to have undergone significant changes in size and structure compared to previous periods. Consequently, the actual structure of the original wooden pagoda at Hwangnyongsa Temple should be understood in terms of the changes in large Buddhist pagodas built in East Asia at that time, and the technical lineage should start with the large Buddhist pagodas of the Baekje dynasty, which were influenced by the Northern dynasty of China. Furthermore, based on the archeological data obtained from the analysis of the images of the nine-story rock-carved pagoda depicted on the Rock-carved Buddhas in Tapgok Valley at Namsan Mountain in Gyeongju, and the gilt-bronze rail fragments excavated from the lecture hall at the site of Hwangnyongsa Temple, the wooden pagoda would appear to have originally been an octagonal nine-story pagoda with a dual structure, rather than a simple rectangular wooden structure.

A Comparative Study Wooden Stupa of Korea, Japan and China(I) - Focused on the Corner Bracket Set - (한.중.일 목조 불탑의 비교론적 고찰(I) - 귀공포를 중심으로 -)

  • Cheon, Deuk-Youm;Yang, Tae-Hyeon;Lee, Jae-Yeon
    • Journal of architectural history
    • /
    • v.21 no.2
    • /
    • pp.7-20
    • /
    • 2012
  • As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.

A Study on Bench Design Using Wooden Ship Making Techniques (목선(木船) 제작기법을 이용한 벤치디자인 연구)

  • Kim, Do-Hoon;Yoon, Yeoh-Hang
    • Journal of the Korea Furniture Society
    • /
    • v.25 no.1
    • /
    • pp.28-35
    • /
    • 2014
  • The most widely used material in furniture is wood. It is not only because it has good machinability and can be easily accessed, but also it is eco-friendly and human-friendly. Such material has been continuously being used for furniture and its machining method has been being actively researched and developed. Lumber has and has developed its own machining method. The conventional lumber machining method is difficult to make various types of furniture because it focuses on solving lumber's own modification problem due to the swelling and shrinking, and durability. Considering such characteristic of the material, a method to make it light and durable has been being researched and possibilities were found in wooden ships. Wooden ships are ships made of lumber, and are light and strong to be used in water. Also, in order to reduce the water resistance, it has streamlined curves so is formatively beautiful. The elegant curves and light and strong structure showed sufficient possibility to be used in furniture. Thus, the purpose of this study is to find a method to make various shapes of lumber lightly and strongly, using the production method of wooden ships, and to use this production method in designing furniture to propose a new form and structure of bench design, differentiating from conventional monotypic furniture.

  • PDF

A Research for apportionment ratio of Roof Load in Traditional Wooden Structure's Dori (전통건축물에서 도리의 지붕하중 분담비율에 관한 연구)

  • Hwang, Jong-Kook
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2007.04a
    • /
    • pp.247-250
    • /
    • 2007
  • In korean traditional wooden structure, to know the critical pass of roof load transmission is very important. to know the critical pass of roof load transmission and to find the role of each dori members, used loading block and load cell. The total weight of loading blocks was 5,8880 N and the number of loading blocks were 16, The experimental fran1e has 1/2 scale. From middle-dori to outside-dori, the linearity of line can't guarantee. So, the distribution of roof load in dori is effected by the initial state of dori. In this research, to remove the effect of initial state, initial deformation was allowed by initial setting.

  • PDF

Load Transfer Mechanism between Rafter and Cross-beam by 2-D Analysis (이차원해석에 의한 서까래 도리 사이의 하중전달 메카니즘)

  • Jung, Sung-Jin;Hong, Sung-Gul;Kim, Nam-Hee;Lee, Young-Wook;Hwang, Jong-Kook;Joo, Seok-Jun
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2007.04a
    • /
    • pp.229-234
    • /
    • 2007
  • In the structural analysis of the Korean traditional wooden structure, while the understanding of the transfer mechanism of roof load is very important, there are few researches on this subject. So, some modeling methods considering the connecting methods of the Korean traditional wooden structure are suggested, the results using each modeling method are compared, and the most reasonable analytical model is presented in this study.

  • PDF

A Study on the Drawing Method and Thought of Architectural Site Plan in Chosun Dynasty (조선시대(朝鮮時代) 건축(建築) 배치도(配置圖)의 도법(圖法)과 사상(思想)에 관한 연구(硏究))

  • Kim, Wang-Jik;Kim, Hong-Sik
    • Journal of architectural history
    • /
    • v.7 no.2 s.15
    • /
    • pp.91-112
    • /
    • 1998
  • There remain several archiectural drawings which was made in Chosun dynasty, which are quite different from current drawings. The site plan which is composed of slanted elevations doesn't exhist in Western drawing method. This elevation development method is common in Korea, China, and Japan. These three nations also have a common point which the wooden structure are popular. So elevation development method is reasonable to represent the wooden structure. Because a drawing mehod reflects cultural character and thought, it is important to read the architectural perception at that time. In this viewpoint, I studied the characters of the drawing method in Chosun dynasty according to the peoriodical articulation of century, and how the drawing method reflects the thought at that time. And I suggested a new posibility of effective and reasonable drawing method for the wooden structure.

  • PDF

A FEA for the Stiffness Estimation of the Transverse Kong-Po in Dae-Woong-Jeon of Bongjeong-Sa (봉정사 대웅전 보 방향 공포의 강성산정을 위한 유한요소해석)

  • Jung Sung-Jin;Hong Sung-Gul;Kim Nam-Hee;Lee Young-Wook;Hwang Jong-Kook;Bae Byoung-Sun
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2006.04a
    • /
    • pp.405-412
    • /
    • 2006
  • Among the various problems involved in the structural analysis of the Korean traditional wooden structure, the analytical model for the Kong-Po is controversial subject as usual. While some experiments are tried for establishing the basis of analytical models, most of these experiments are performed using scale down specimens. So, it is not possible to apply these experimental results to structural analysis of Korean traditional wooden structure directly. A numerical study for analogizing the stiffness of full scale Kong-Po structure is performed on the basis of experimental specimen. Some parameter studies using finite element method are made in this study. The finite element analysis used in this study is geometric material nonlinear analysis. The stiffness of Kong-Po structure found out in this study can be used for modelling the joints of the Korean traditional wood structure in frame analysis.

  • PDF

The Analysis of the Design Characteristics of Wooden Houses in order to Develop Korean Modern Wooden Houses (한국형 중목구조 주택 표준화 개발을 위한 목조주택의 디자인 특성 분석)

  • Lee, Jusuk
    • Journal of the Society of Disaster Information
    • /
    • v.13 no.4
    • /
    • pp.537-549
    • /
    • 2017
  • Wooden houses are classified into Traditional, Modern, Platform, Timber framing types. The most popular type is Platform framing which is come from foreign culture. The foreign and Korean tree structure tend to be incompatible with Korean culture and don't fit well with modern lifestyle. In this study, it will analyze the design characteristics of the traditional and modern wooden house to solve these problems. The design characteristics will be contributed to the development of wooden architecture which is suitable for Korean architectural style and lifestyle The research consists of space analysis, plane analysis, structural system analysis, roof type analysis, and aesthetic analysis. From the analytical results the design characteristics of traditional Hanok and modern wood structure, we propose the modular elements and the inner and outer shapes of the Korean - style wooden house.