• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.325-329
• /
• 2016

Extracting natural dyes have been widely studied since the needs of eco-friendly and non-toxic natural dyes increased. In this paper, the natural dyes were extracted from sappan wood, gardenia, and mugwort containing brazilein, crocin, and chlorophyll process. After the extraction with variables of pH of solvent and reaction time, the chromaticity of extracted natural dyes was analyzed using quantitative values from brightness and color coordinate (L, a, b) based on the target colors of red, yellow and green. For the case of brazilein and crocin, the cadmium red and cadmium yellow, respectively were extracted. In the case of sappan wood and gardenia, the red pigment under pH 12 (${\Delta}$ = 18.2) and the yellow pigment at pH 9 (${\Delta}$ = 18.4) were extracted respectively. However, the color of extracted chlorophyll from mugwort was different from the target chrome green.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.46-51
• /
• 2003

The feasibility of using bleaching treatments for removing fungal stain was evaluated on heavily stained raiadta pine sapwood. Sodium chlorite and sodium hypochlorite appeared to destain fungal discoloration by providing proper treatment conditions (chemical concentration, treatment temperature, and treatment time), while hydrogen peroxide did not remove fungal stain under the bleaching regimes evaluated. The addition of sodium silicate and sodium hydroxide in the hydrogen peroxide solution as a buffer could remove fungal discoloration completely; however, the color of wood surface turned faint green after bleaching, thereby reducing the lightness of bleached samples. The results suggest that hydrogen peroxide bleaching could be a feasible method for removing fungal discoloration of stained radiata pine sapwood, although further research is needed to solve the problem of color change after bleaching. Also, further tests under field conditions are recommended.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.31-38
• /
• 1999

This paper deals with a coating technique of hardening surface layer of softwood{Larix leptolepis) flooring board to improve its surface properties such as hardness and abrasion resisitance without spoiling its exellent qualities such as beautiful color tones and great strength. For surface hardening of the wood, polyurethane wood sealer was used as under coat, polyurethane sanding sealer as intermediate coat, and UV-curing epoxy acrylate and urethane acrylate varnishes as top coat. The hardness of the wood was improved by the coating treatment and it was similar to that of high density hardwood such as oak, keruing. The abrasion resistance of the coated wood was greatly improved by UV curing epoxy acrylate or urethane acrylate varnishes. Adhesion properties and impact resisitance of the coated wood surface were also good. It was suggested that the well-coated larch wood could be used as interior flooring board as substitute for hardwood such as keruing.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.78-90
• /
• 2014

This paper examines the way that the principles of coloration for Hoecha(繪次) and Sucha(繡次) were applied for shoe making in ancient China and Korea. Hoecha is the principle of drawing, and Sucha is the principle of embroidery. Hoecha and Sucha is the application principle of the five colors(五方色) from the five elements(五行: metal, wood, water, fire, and earth). Hoecha matchs a color with the opposite side color, and Sucha matchs a color with the beside color. A shoe consists of Sinul(body of shoe) and ornaments attached to it. According to the ratings of shoes, Hoecha and Sucha were differently applied for coloration of Sinul and its ornaments. In general, shoes were classified into Seok and Gu. For Seok, which was the high-ranked shoes, Hoecha was applied, while Sucha was applied to Gu, the low ranked shoe. As Hoecha was originally a principle of coloration for patterns on tops(jacket. 上衣), it was applied to the high ranked shoes i.e., Seok. Also, as Sucha was a principle of coloration for patterns on bottoms(skirt. 下裳), it was applied to the low ranked shoes i.e., Gu. Thus, black was decorated on red Seok, blue on white Seok, red on black Seok, yellow on hyeon(玄: a kind of black color) Seok, and white on blue Seok, all of which were applications of the principle of Hoecha. As the application of the principle of Hoecha to Seok was also done for red Seok for males and females in late Joseon, and red Seok for the crown prince in the period of the Korean Empire, black decorations were used for red Sinul. However, for blue Seok, worn by females in the period of the Korean Empire where Ming's systems prevailed, black decorations were used, which was an application of Sucha. Though there had been no discrimination between genders in the application of Hoecha and Sucha originally, the low ranked principle of coloration was applied to Seok for females.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.294-304
• /
• 2017

The purpose of this study is to analyse and derive the color characteristics of childhood children's learning spaces and furniture for improving the color design of those and to present the direction of design and to build up the DB. The study covers products from domestic and overseas infant furniture manufacturers and 11 preschool learning rooms. The study method uses the collected furniture and spatial images to derive a palette of colors and compare color characteristics. The analysis results show that, the domestic infant furniture tend to use a variety of colors with pale tone or use consistent hard wood furniture according to the requirements of adult taste and marketability. Also, it attempts to create a very negative color scheme, but it looks like disorganized, and there is not much color design integrated with the architecture. Thus, color designs ensure that the ordering elements of the color scheme are clearly recognized by applying preferred color tones of childhood, like vivid and bright tone with high chroma and middle or hight Brightness value. Lastly, it should establish guidelines for specific palettes and color scheme, which can be utilized in the design of childhood children's learning spaces and furniture.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.77-86
• /
• 2016

In order to analysis on color difference of natural dyes, I have dyed Hanji, cotton, silk fabric and exposed them to carbon arc light. The results of experiment have been analysed by Munsell's value, and compared the difference of colors which were recognized visually. Gardenia Jasminoides is monogenetic dye, but it gained darker color by pre-mordanting method used aluminum mordant agent and greenish yellow color by ferric mordant agent. whereas Curcuma, an Amur cork, and bud of pagoda tree are shown as greenish yellow color, and A barberry root, Betel nut, and Rhubarb are shown as reddish yellow color. these gained khaki colored dyed fabric by ferric mordanting. In addition, Sappan wood showed great result in pre-mordanting. Especially, it gained dark red color by aluminum pre-mordanting. The pink color was shown by post-mordanting. and Logwood showed great dyeing result in Hanji and cotton better than silk. Specially pre-mordanting was effective. Hanji and cotton showed greenish blue color by aluminum pre-mordanting, and silk showed brown color. However the color, which was recognized visually, differed from colorimeter sometimes. Therefore, such color table might be necessary for the natural dyeing.

• KIEAE Journal
• /
• v.6 no.4
• /
• pp.33-39
• /
• 2006

This study aims to investigate the method to reduce the surface temperature caused by insolation. To achieve this goal, surface temperature of building is measured and the effects of exterior material's color and brilliance were checked with infrared imaging. And also, exterior material's absorptances due to outdoor surface heat transfer coefficients were measured. After surface temperature measurement of 37 specimen of 5 categories, the temperature is the highest on wood($53.62^{\circ}C$) and panel($52.05^{\circ}C$). Dryvit, stone, brick is the rating of order. For exterior material's absorptances, panel(0.883) and wood(0.868) were high and Dryvit, stone, brick follows wood and panel.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.27-37
• /
• 2002

This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.447-447
• /
• 2023

This study aimed to convert underutilized moso bamboo into high-value added products such as fences, interior materials, lighting fixtures, and accessories. Green moso bamboo poles with a diameter of approximately 10 cm and a length of approximately 3.7 m were heat treated at 140℃ using a large-scale kiln. The processing time was meticulously adjusted through various stages, including pretreatment (6-8 hours at 60℃), cooking (8-10 hours at 100℃), steaming (26-30 hours at 120℃), heating (4-6 hours at 140℃), and finally, cooling (below 80℃). A meticulously designed heat treatment process has enabled efficient mass production of moso bamboo poles with improved qualities, including minimal splitting, moisture levels below 3%, and a specific gravity of 1.05. The focus of this study was to present the physical and drying properties, such as color, dimensional change, specific gravity, moisture content, and splitting, observed during the heat treatment process.