• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.51-65
• /
• 2019

A wood-plastic composite (WPC) paver block was manufactured using wood chips waste through an extrusion process, and it was intended to be used for paving in basic rest areas. The first stage in this study covered preliminary tests in terms of flexural strength and dimensional swelling to determine the optimal WPC compounding mix condition, by variation of the WPC ingredients. Next, three different paver blocks including the WPC block, a non-porous cement block, and a porous cement block were tested in terms of various material properties in the laboratory. Finally, two outdoor test sections of the proposed paver blocks were prepared to simulate a basic rest area. Test results indicated that the flexural strength of the WPC paver blocks was about 1.6 times greater than that of the tested cement paver blocks. The WPC block pavement was unaffected by water buoyance as well as volume expansion due to swelling. Results from the impact absorbance test and light falling weight deflectometer (LFWD) test clearly showed that the WPC block paving system marginally satisfied the comfortable and safe hardness range from the pedestrians' perspective, while the results demonstrated that it is structurally sound for application as a road paving block.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.53-60
• /
• 2019

In this study, an experimental study was carried out to evaluate the bond shear performance according to the shear connector between the glue-laminated timber and steel interface. Ten block shear specimens were fabricated according to the configuration of the adhesive surface of wood and steel. In addition, four test specimens were produced according to the main variable shape of the wood-concrete shear connector. As a result of the block shear test, the shear strength of the steel-wood adhesive is shown to have a shear performance greater than the wood-wood shear strength. As a result of the push-out test according to the shape of the shear connector, the shear strength increased linearly with the attachment area. The complete composite behavior between the glued-laminated timber and the steel can be secured.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.607-615
• /
• 2016

The delamination along the annual ring on the cross-section of laminae and the bonding strength according to the tangential angle between laminae were evaluated for the production of 3-ply cross-laminated timber (CLT) using domestic larch. Since there is no standard for CLT in Korea, the production and test of specimens for bonding strength followed the standard procedure of "Structural glued laminated timber" (KS F 3021). The standard specifies to exclude any measurement from the cracks of timbers resulted from drying or knots during delamination test of the glued laminated timbers. However, the failure of cross-sectional tissues along the annual rings was observed near the glue-line of all specimens during the delamination test. Because this phenomenon can generate defects in the CLT that may be exposed to various temperatures and relative humidities after the actual construction, the delamination percentage was measured by including this wood failure. As a result, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed inward was the lowest, which was around 13%, regardless of the annual ring direction of the middle lamina. On the other hand, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed outward was the highest, which was around 26%. Furthermore, end-split occurred in the outer lamina during the drying process of the boiling delamination test, which affected the delamination percentage. Therefore, the soaking delamination test was found to be more appropriate for evaluating the delamination strength of CLT. The block shear strength of larch CLT was $3.9{\pm}0.9$ MPa on average, which was 46% lower than the block shear strength requirement (7.1 MPa) of the standard, but satisfied the criteria of the block shear strength (3.5 MPa) of the European Standard (prEN 16351: 2013).

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.315-322
• /
• 2016

2개 이상의 보부재 집성재 요소들의 측면접착으로 제작된 "블록접착집성재"는 대단면 목조건축물의 건축부재로 활용 가능한 구조용재다. 블록접착집성재의 측면은 접착제의 종류와 도포량 및 압체압력을 각기 다른 조합으로 접착하여 박리시험과 전단블록시험으로 접착성능을 검토하였다. 실험결과 레조시놀접착제 $500g/m^2$을 도포하고 압체압력 1.5 MPa의 조건으로 제작된 블록접착집성재의 측면접착성능이 가장 양호하였다. 양호한 측면접착조건으로 제작된 블록접착집성재는 동일단면계수의 대조군 집성재와 휨 강도 성능을 비교 검토하였다. 블록접착집성재의 휨 탄성계수는 대조군 집성재와 유사하였으며, 파괴계수는 대조군집성재 보다 27% 향상되었다. 할렬은 대조군집성재 보다 블록접착집성재에서 다량 발생하였으며, 블록접착집성재의 측면접착층에서 계면파괴나 응집파괴는 관찰되지 않았다.

• 한국가구학회지
• /
• 제15권2호
• /
• pp.19-27
• /
• 2004

As glulam is a woody material, it is necessary to be more careful in a gluing process. It takes 6-7 hours at $40-60^{\circ}C$ to harden PRF resin used in making structural glulam, and about 24 hours at room temperature. In the present process which can not use a press continuously, reducing the hardening time is necessary to increase production. The experiment was done to compare the adhesive properties of PRF resin and MUF resin through bending test, block shear strength test and water soaking test. In comparing the bending strength of prediction MOE is 1.2 times higher that actual MOE. PRF and MUF do not show significant difference in MOE and MOR, and in block shear strength test, such as shear strength and wood failure rate. However, in water soaking and boiling water soaking tests PRF and MUF show the significant difference in delamination rate.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.613-621
• /
• 2017

본 연구는 건조된 나무못이 유지력 특성에 미치는 영향에 대해 알아보기 위해 실시했다. 실험블록은 두께가 15 mm인 소나무와 잣나무 목재 및 파티클보드로 제작했다. 직경이 6, 8 및 10 mm인 나무못은 밤나무, 잣나무 및 백합나무 목재로 각각 제작한 다음 전건시켜 사용했다. 연구결과 나무못 직경이 증가하면 유지력은 증가했지만, 유지력 강도는 감소했다. 건조된 나무못의 유지력은 일반적인 조건의 나무못의 유지력보다 잣나무목재 실험블록에 직경이 10 mm인 백합나무 목재로 만든 나무못을 제외하고 10% 이상 증가를 보였다. 유지력 강도는 모든 수종의 나무못 직경과 실험블록에서 10% 이상 증가를 보였다. 파티클보드 실험블록에 건조된 나무못의 유지력과 유지력 강도는 각각 6~14.2%와 6.2%~18.2% 증가를 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.66-71
• /
• 2015

Safety, resilience and comfort of pedestrian were assessed by the British Pendulum Test and SB/GB factor test at 8 kinds of sidewalk pavement. Sidewalk paving materials were normal concrete, porous concrete, concrete block, soil concrete, asphalt, rubber chip/resin mixture, wood chip/resin mixture and floor tile. In addition, a survey was conducted to investigate the perception of pedestrians on the sidewalk paving material. As a result, while the skid resistance value was measured in the most 60BPN above, the floor tile showed a low value of about 30BPN. The ratios of SB factor to GB factor of the elastic pavements(rubber/resin mixture and wood chip/resin mixture) appeared to be relatively large when compared with those of the conventional sidewalks. The survey showed that respondents perceived as more safe and comfortable elastic pavements compared to conventional pavements. Approximately 50% of respondents answered that hardened soil pavement was the most environmentally friendly.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.736-742
• /
• 2016

나무못은 다양한 구조물의 목재부재들을 연결하는데 일반적으로 사용된다. 하지만 국산재의 나무못 유지력에 대한 자료는 매우 부족하다. 본 연구는 나무못의 직경과 천공여척이 유지력 특성에 미치는 영향에 대해 알아보기 위해 실시했다. 실험 블록은 두께 15 mm인 소나무와 잣나무 목재로 제작했다. 6, 8 및 10 mm 직경인 나무못은 밤나무, 잣나무 및 백합나무 목재로 각각 제작했다. 연구결과 나무못 직경이 증가하면 유지력은 선형으로 증가했지만 유지력 강도는 감소했다. 본 연구는 또한 천공여척이 작아질수록 유지력과 유지력 강도도 선형으로 증가하는 것을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.357-363
• /
• 2009

본 연구에서는 작업성과 경제성을 고려하여 집성재 제작용 접착제를 목재와 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic) 접착에 적용할 수 있는지를 검토하였다. 복합집성재는 접착제 종류와 혼합비에 따라 6가지 타입으로 제작하여 블록전단강도시험과 침지박리, 삶음박리 시험을 실시하였다. 레조시놀수지 접착제와 초산비닐 수지접착제, 에폭시수지 접착제를 사용한 복합집성재 3가지 타입과 레조시놀수지 접착제와 초산비닐수지 접착제를 혼합한 3가지 타입으로 총 6가지 타입으로 제작하였다. 블록전단시험 결과 모든 타입의 복합집성재가 KS F 3021 기준 $7.1N/mm^2$ 보다 높아 전단강도는 양호하였지만, 목파율에서는 초산비닐수지접착제가 65.9%로 가장 우수한 접착 성능을 나타내었다. 박리시험에서는 초산비닐수지 접착제를 사용한 경우 GFRP 접착층까지 포함된 경우 침지 박리는 1.08%, 삶음박리는 4.16%로 KS F 3021 합격기준인 5% 이하를 만족하였다. 레조시놀수지 접착제만을 사용 한 경우 목재 접착층은 침지박리 1.26%, 삶음박리 0%로 합격기준을 만족하였으나 GFRP 접착층을 포함시킬 경우 침지박리는 21.85%로 합격기준을 만족하지 못하였고 삶음박리의 경우만 1.45%로 만족하였다.