• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.67-73
• /
• 2012

In this paper, in order to overcome the disadvantage of wireless-based sensor network, a hybrid sensor network using wired and wireless linkage is proposed. Proposed a wired and wireless linkage hybrid sensor network can compensate the defect of poor transmission at the indoor wireless environment, and can be free from interference between a wireless LAN and Bluetooth of the same frequency bandwidth due to an attribute of low-loss transmission at the CATV network. Also, proposed a wired and wireless linkage hybrid sensor network make use of CATV network which is well-built infrastructure, is more efficient to design network, assure a stability and high reliability of the sensor network as providing a stability for an inaccuracy and a predictable transmission link for the existing wireless network.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.115-121
• /
• 2007

Due on failures of communication nodes for the wireless and wired networks, mobile agents may be blocked even if there is available service in the networks. To solve it, we propose migration policy with reordering of the paths to guarantee the migration of mobile agents and the paper will provide the extension with the autonomous migration of mobile agents.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.51-55
• /
• 2008

A digital home is a ubiquitous environment that is expected to be realized in the near future. All information appliances in a house are connected to each other through wired and/or wireless home networks. Authenticated user can access the various services provided by the digital home, and the access is not restricted by equipment, time, or location. The technologies that form the digital home can be grouped into two categories: wired networking technologies and wireless networking technologies. For the purpose of ubiquitous environments, wireless-networks offer suitable and seamless high-quality services. A wireless LAN can be created simply by equipping a single access point. For that reason, the cost of establishing such a network is low and using it is easy. Of course, there is an exciting new wireless technology. It is the Ultra Wide Band (UWB). However, it is not enough to bring wireless convenience, although offering a broad range of high-speed data transfer capabilities, Because of unstable. Thus, of the wireless-networking systems, we focus on the wireless LAN. We quantitatively analyze its capabilities. The dynamic and adaptive wireless LAN provides a foundation for the evolution toward the next generation of wireless and adaptive networks. The difference between wired LAN and wireless LAN in upload and download rates is small. Although the wireless LAN experiences a greater loss rate than the wired LAN, the difference is minimal. We conclude that a wireless LAN is suitable for use in an apartment environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1933-1941
• /
• 2016

This paper compares the performance of wireless communication technologies to replace the wired networks by wireless networks on avionics intra-communication. Due to the drawbacks of wired network, such as complexity, weight, maintenance cost and scalability, it leads to the high data rate and network traffic demands of avionics systems. Therefore, in WAIC(Wireless Avionics Intra-Communications) system suggested by ITU(International Telecommunication Union), based on environment of avionics system and requirements of a wired network, wireless network structures are defined to solve the problems of wired networks. In this paper, we consider features, advantages and disadvantages of wireless communication technologies which can be used for wireless avionics network, and we propose suitable wireless communication technology candidates for wireless avionics networks in WAIC environments.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.27-34
• /
• 2012

In this paper, using a new low-power consumption method for ZigBee device, which consume low-power using an output power control algorithm through RSSI monitoring as interlocking wireless network using ZigBee which has advantages of a low-power consumption, a low-cost, a compatibility and a draft international standardization enacted by IEEE and ZigBee Alliance, with wired network using built coaxial cable to overcome the disadvantage of the existing wireless sensor network, is proposed. Effectiveness of the output power control algorithm through RSSI monitoring has been verified by experimentation for more optimized low-power consumption.

• Journal of Convergence Society for SMB
• /
• v.4 no.3
• /
• pp.15-20
• /
• 2014

Wireless network is convenient as compared to the wire, and it is also easy. Therefore, SMEs in the country is the trend that many SMEs prefer the radio using a lot of radio as an extension of the wired network modification felt the burden of fixed installations. Wireless networks are vulnerable to security together than a wired network, since it passes the packet through the broadcasting. Therefore, analyzing the vulnerability of wireless networks, and proposes countermeasures about wireless network security in small and medium-sized businesses.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.53-61
• /
• 2022

Accidents are steadily occurring due to machine defects and carelessness during LNG storage operations. In previous studies, an environmental sensor module capable of measuring pressure, temperature, gas concentration, and flow to detect danger in advance was developed and the response speed according to the amount of leaked gas was measured. This paper proposes the development of a wired and wireless communication module that transmits data measured by the environmental sensor module to embedded devices connected to wired and wireless networks of SPI, UART, and LTE. First, a data communication module capable of interworking with an environmental sensor is designed. Design a protocol between devices in the Local Control Part and wired and wireless protocols in the Local Control Part and Remote Control Part. Ethernet, WiFi, and LTE communication modules were designed, and UART and SPI channels that can be linked with embedded controllers were designed. As a result, it was confirmed through a UI (User Interface) that each embedded device transmits data measured by the environmental sensor module while simultaneously communicating on a wired and wireless basis.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.285-291
• /
• 2014

Recent, development of wireless communication devices are rapidly and these device being deployed to the user very fast. By this results, a wired network device and the new device such as wireless devices incorporate. Then a demand of new mesh network is rapidly growing. In this wired/wireless integrated network environment, the network is configured automatically, and a user or wireless communication devices must be provided for authentication services. But, these services do not in the real world. Therefore, in this paper, we propose that wired/wireless integrated network environment to automatically configure the network using OpenFlow and the authentication system using Kerberos method. Our proposed system to be able to provide authentication services, confidentiality, integrity services for user or wired/wireless communication devices. And it can be prvented as well to man-in-the-middle attacks.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.577-580
• /
• 2003

최근 차세대통합네트워크(NGN), ALL-IP 망 진화 방향과 함께 동기식과 비동기식 IMT-2000 망의 통합(Convergence) 또는 연동(Harmonization)에 관한 연구가 활발히 이뤄지고 있으며, 이동통신 망의 개방화에 대한 분위기가 점차 무르익어 가고 있다. 이러한 추세에 UMTS, cdma2000, WLAN 과 같은 서로 다른 방식의 무선 액세스 망으로부터 요구되는 무선인터넷 접속 요구를 하나의 통로로 연결하고 수용할 수 있는 모바일 액세스 통합 게이트웨이가 필요하다. 본 논문에서는 차세대 네트워크 발전 방향과 이동통신 망 개방의 흐름에 맞추어 동기식 망과 비동기식 IMT-2000 망에서 동시에 무선인터넷 서비스 접속을 제공하는 통합 게이트웨이 시스템(A-MiDAS)을 개발하기 위한 형상 설계 방법과 시스템 개발 시 고려사항 등에 대해서 기술한다.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.161-171
• /
• 2019

Government transactions over wireless electronic devices are not safe and hence the messages are prone to attack. Thereby, devices supporting wireless Internet must assure the same level of security and privacy as the wired network. National public key infrastructure (NPKI) for electronic government used in the wired environment is not suitable for wireless environment for mobile government (mGovernment) because of the limitations of computing power, memory capacity and restricted battery power. This requires the development of a new NPKI for mGovernment, denoted as mNPKI, to developing countries, which provides the same security level as the wired NPKI. For the wireless environment requirements, mNPKI is based on short lived certificates. Analysis shows that mNPKI is well suited to wireless Internet and provides the same security requirement from the wired NPKI.