• Journal of Biosystems Engineering
• /
• 제34권5호
• /
• pp.305-314
• /
• 2009

The purpose of this paper was to design an effective control system of 1-axis exciter for a seat vibration test of agricultural tractors using MATLAB simulation. The developed simulation model was composed with a hydraulic pump, a hydraulic servo valve, a hydraulic cylinder and load system. Also it was verified by comparing the simulation results with experimental results of actual control system in order to optimize the control performance. And in order to improve its control performance, the designed PID controller in this research was tuned using Ziegler-Nichols 2nd law and zero's moving method of PID controller's transfer function. As the result of these research, the developed position control system was able to control the system's position accurately within 5% errors.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.156-165
• /
• 1997

In the practical control systems, the dynamic range of actuatiors is limited(or saturated) when actuators are driven by sufficiently large signals. This gives rise to a nonlinearity as a result of actuator saturation. For example, the upper limit is imposed on productive capability by available factory space and capital equipment. Other examples of those kinds of actuator saturations are a maximum torque of the actua- ting motors and a throttle position in an aircraft speed control A saturating actuator may lead not only to a large overshoot during start-up and shut-down, but also to deterioration of the performance due to the uncertainties. That is, the speed of response is decreased and, possibly, the system output may not follow the lalrge reference inputs. The large-overshoot may be accompanied by rest wind-up(or called by integra- tor wind-up) which comes from controllers with integral action in saturation operation regions. Eventually, as the overshoot increases, the system has a limit cycle or becomes oscillatorily unstable. Due to these cir- cumstances, many studies are focused on the stability and robustness of the nonlinear systems with satu- rating actuator in the time-domain as well as in the frequency-domain.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.623-631
• /
• 2012

In this paper, a digital controller design procedure is presented for single-phase voltage-doubler boost rectifiers (VDBR). The model derivation of the single-phase VDBR is performed in the s-domain. After that the simplified equivalent z-domain models are derived. These z-domain models are utilized to design the input current and the output dc-link voltage controllers. For the controller design in the z-domain, the traditional K-factor method is modified by considering the nature of the digital controller. The frequency pre-warping and anti-windup techniques are adapted for the controller design. By using the proposed method, the phase margin and the control bandwidth are accurately achieved as required by controller designers in a practical frequency range. The proposed method is applied to a 2.5 kVA single-phase VDBR for Uninterruptible Power Supply (UPS) applications. From the simulation and the experimental results, the effectiveness of the proposed design method has been verified.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.839-845
• /
• 2013

A CSTR (Continuous Stirred Tank Reactor) is a highly nonlinear process with varying parameters during operation. Therefore, tuning of the controller and determining the transition policy of controller parameters are required to guarantee the best performance of the CSTR for overall operating regions. In this paper, a methodology employing the 2DOF (Two-Degree-of-Freedom) PID controller, the anti-windup technique and a fuzzy gain scheduler is presented for the temperature control of the CSTR. First, both a local model and an EA (Evolutionary Algorithm) are used to tune the optimal controller parameters at each operating region by minimizing the IAE (Integral of Absolute Error). Then, a set of controller parameters are expressed as functions of the gain scheduling variable. Those functions are implemented using a set of "if-then" fuzzy rules, which is of Sugeno's form. Simulation works for reference tracking, disturbance rejecting and noise rejecting performances show the feasibility of using the proposed method.

• 전력전자학회논문지
• /
• 제13권6호
• /
• pp.411-419
• /
• 2008

대용량 동기 발전/전동기 기동운전에는 주로 사이리스터를 이용한 정지형 주파수 변환 장치(SFC : Static Frequency Converter)시스템이 널리 사용되고 있다. 지금까지의 국내 SFC에 대한 연구는 주로 양수 발전 시스템에 관한 연구가 주류를 이루고 있어 가스터빈용 SFC 시스템에 관한 구체적인 기동 알고리즘에 관한 연구는 미흡한 실정이다. 따라서 본 논문에서는 PI 전류 제어기의 안티 와인드업 출력 신호를 이용한 가스터빈 동기 전동기의 기동을 위한 새로운 약계자 제어 알고리즘을 제안하였으며 이에 대한 실효성과 타당성을 실험을 통해 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.908-925
• /
• 2014

Induction Motor (IM) has several desirable features for high performance adjustablespeed operation. This paper presents the design of a robust controller for vector control induction motor drive performances improvement. Proposed predictive speed controller, which is aimed to guarantee the stability of the closed loop, is based on the Poisson-Laguerre (PL) models for the association vector control drive and the induction motor; without necessity of any mechanical parameter, and requires only two control parameters to ensure implicitly the integrator effect on the steady state error, load torque disturbances rejection and anti-windup effect. In order to improve robustness, insensitivity against external disturbances and preserve desired performance, adaptive control is added with the aim to ensure an online identification of controller parameters through an online PL models identification. The proposed control is compared with the conventional approach using PI controller. Simulation with MATLAB/SIMULINK software and experimental results for a 1kW induction motor using a dSPACE system with DS1104 controller board are carried out to show the improvement performance.

• 로봇학회논문지
• /
• 제14권1호
• /
• pp.50-57
• /
• 2019

This work presents a design and control method for a flexible robot arm operated by a wire drive that follows human gestures. When moving the robot arm to a desired position, the necessary wire moving length is calculated and the motors are rotated accordingly to the length. A robotic arm is composed of a total of two module-formed mechanism similar to real human motion. Two wires are used as a closed loop in one module, and universal joints are attached to each disk to create up, down, left, and right movements. In order to control the motor, the anti-windup PID was applied to limit the sudden change usually caused by accumulated error in the integral control term. In addition, master/slave communication protocol and operation program for linking 6 motors to MYO sensor and IMU sensor output were developed at the same time. This makes it possible to receive the image information of the camera attached to the robot arm and simultaneously send the control command to the robot at high speed.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.225-229
• /
• 2019

자기베어링은 기계적인 마찰이 없고 안정적인 동역학 특성을 갖기 때문에 진공 및 청정 환경이나 고정도가 요구되는 분야에서 많이 활용되고 있다. 그러나 자기베어링은 다양한 장점에도 불구하고 일반적으로 제어기가 복잡해서 적용 범위의 확산이 제한적이다. 본 논문에서는 복잡도가 낮은 디지털 방식의 자기베어링 제어기를 제안하였다. 또한 디지털 제어기 성능열화의 주된 원인인 아날로그 신호를 디지털 신호로 변환하는 과정에서 발생하는 오류와 제어 알고리즘 구현상의 문제점들을 분석하고 해결하였다. 제안한 제어기를 실제 자기베어링에 적용한 실험을 통해 제어기가 자기부상 목표 정밀도를 갖는 것을 확인하였다.

• The Korean Journal of Pain
• /
• 제14권1호
• /
• pp.1-6
• /
• 2001

Background: Subcutaneous injection of 5% formalin into the hind paw of the rat produces a biphasic nociceptive response. The second phase depends on changes in the dorsal horn cell function that occur shortly after an initial C-fiber discharge, spinal sensitization, or windup phenomenon. This study was performed to investigate the role of glutamate during spinal sensitization. Methods: Sprague-Dawley rats weighing 200 to 250 g were used for this study. Under light anesthesia (0.5% isoflurane) the rats were segregated in a specially designed cage and $50{\mu}l$ 0.5% formalin was injected subcutaneously in the foot dorsum of right hindlimb. Forty minutes after the formalin injection, the rat was quickly decapitated and spinal cord was removed. The spinal segments at the level of L3 (largest area) was collected and stored in a deep freezer ($-70^{\circ}C$). The mRNA gene expression of N-methyl-D-aspartate receptor (NMDAR) and the metabotropic glutamate receptor subtype 5 (mGluR5) were determined by the polymerase chain reaction. Results: The number of flinches was $19.8{\pm}2.3/min$. at one minute after formalin injection and decreased to zero after then. The second peak appeared at 35 and 40 minutes after formalin injection. The values were $17.8{\pm}2.2$ and $17.2{\pm}3.0/min$. The mRNA gene expressions of NMDAR and mGluR5 were increased by $459.0{\pm}46.8%$ (P < 0.01) and $111.1{\pm}4.8%$ (P > 0.05) respectively at 40 minutes after formalin injection. The increased rate of NMDAR was significantly higher than that of mGluR5 (P < 0.01). Conclusions: From these results it suggested that NMDAR partly contributed to the mechanism of central sensitization after the formalin test but mGluR5 did not.

• 수산해양기술연구
• /
• 제60권1호
• /
• pp.71-79
• /
• 2024

In compliance with environmental regulations at sea and the introduction of unmanned autonomous ships, electric propulsion ships are garnering significant attention. Induction machines used as propulsion electric motor (PEM) have maintenance advantages, but speed control is very complicated and difficult. One of the most commonly used techniques for speed control is DTC (direct torque control). DTC is simple in the reference frame transformation and the stator flux calculation. Meanwhile, two-level and three-level voltage source inverters (VSI) are predominantly used. The three-level VSI has more flexibility in voltage space vector selection compared to the two-level VSI. In this paper, speed is controlled using the DTC method based on the specifications of the PEM. The speed controller employs a PI controller with anti-windup functionality. In addition, the characteristics of the two-level VSI and three-level VSI are compared under identical conditions. It was confirmed through simulation that proper control of speed and torque has been achieved. In particular, the torque ripple was small and control was possible with a low DC voltage at low speed in the three-level VSI. The study confirmed that the application of DTC, using a three-level VSI, contributes to enhancing the system's response performance.