• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.673-675
• /
• 2015

This paper presents a design of a high speed 2-phase 6/5 switched reluctance motor (SRM) for an air-blower application. This type of motor is suitable for the applications that require high speed and only one directional rotation as air-blower. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor can be operated at any rotor position. The proposed 6/5 SRM uses short flux path technique that achieved by means of winding configuration and lamination geometry. The purpose of short flux path is to reduce the core loss and the absorption MMF in the stator. The proposed 2-phase 6/5 SRM is verified by finite element method (FEM) analysis and Matlab-Simulink. In order to verify the design, a prototype of the proposed motor was manufactured for practical system.

• Laser Solutions
• /
• v.18 no.4
• /
• pp.1-5
• /
• 2015

For continuous laser micro patterning on three-dimensional free form surface, innovative laser system is developed. The two axis galvanometer is combined with the dynamic focusing unit to increase optical distance. Also, it is synchronized with the 3 axis mechanical system. To determine laser machining sequence, laser CAM system is developed. It can make possible of 3D surface micro patterning under $25{\mu}m$ pattern width. The uniformity of pattern width is about 2.8% and it is validated that focal plane is well conserved by the dynamic focusing unit. Velocity and positional information of 1 axis is stage is fed to the scanner control board by the encoder signal and it makes possible real time synchronization. With this system, possible patterning volume is enlarged from $40{\times}40mm^2$ to $40{\times}120{\times}30mm^3$.

• Food Science and Industry
• /
• v.51 no.1
• /
• pp.26-36
• /
• 2018

Terahertz (THz) represents the portion of the electromagnetic radiation between the microwave and the infrared region and is within the frequency range of 0.1-10 THz. The ability of THz waves to pass through a wide variety of packaging materials, combined with their ability to characterize the molecular structure of many substances makes it an attractive tool for the application of food quality and safety management. This review provides current information on application of THz spectroscopy/imaging technology for food quality and safety management. The THz spectroscopy/imaging technology has been shown to be useful for detecting foreign bodies, vitamin/moisture, pesticides, antibiotics, melamine etc. However, major barriers to the adoption of THz spectroscopy/imaging for food quality and safety management include THz signal loss in heterogeneous food matrices, high costs of sources and detectors, and absence of a library for the wide group of food compounds. Further research is needed to overcome these barriers.

• The Plant Pathology Journal
• /
• v.27 no.2
• /
• pp.164-169
• /
• 2011

Previous studies have addressed the management of phyllosphere pathogens by leaf and root-associated microbes. The present study evaluated the effect of the foliar application of three strains of Bacillus spp. on plant growth and fruit quality. The application of a bacilli spore preparation significantly improved leaf growth parameters such as leaf thickness and photosynthesis capacity, indicating that bacilli treatment directly promoted leaf growth. In addition, foliar treatment resulted in an improvement in the key indicators of fruit quality including water, glucose, and sucrose contents. The present results suggest that foliar spraying of beneficial bacilli is a potential treatment of wide application for the improvement of apple quality. Foliar application of bacilli preparation as effective plant growth-promoting rhizobacteria broadens the spectrum of their availability for orchard application.

• Korea Journal of Hospital Management
• /
• v.5 no.2
• /
• pp.78-99
• /
• 2000

Objectives: The purpose of this study was to evaluate the opinions of hospital managers on DRG pilot study. Methods: Managers of 800 hospitals which had participated in DRG pilot study during the period 1997-1999, were requested to respond to structured self-administerd questionnaire. The questionnaire was composed with six categories: the motivation and satisfaction for the DRG pilot study, the opinions on the level of unit price, the appropriateness of DRG classification, the change of medical service quality during the pilot study, the patient's complains resulted from DRG system. and the opinions on the nation-wide application of DRG system. Results : Of the 800 subjects, 327(clinic, 210: 25 hospitals, 82 general hospitals, and 16 tertiary hospitals) completed the questionnaire, and the overall response rate was 41%, 121 hospitals(27%) answered that they participated in DRG pilot study because of convenience of claims and 118 hospitals(35%) dissatisfied with DRG system. 251 hospitals(85%) thought that the level of unit price under the DRG system was same as or lower than that of fee-for service. 297 hospitals(92%) responded that DRG classification should be modified and 137 hospitals(47%) experienced deterioration of medical service quality during the DRG pilot study. The 116 hospitals(35%) experienced the patient's complains resulted from DRG system. The 85 hospitals(88%) didn't want nation-wide application of DRG system. Conclusion: Most of the responded managers seemed to have negative opinions on DRG pilot study, even though they had been participated voluntarily. Further studies and extensive evaluations of DRG reimbursement system are needed before nation-wide application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1824-1831
• /
• 2009

This paper analyzes the propagation speed of the wide-area power system frequency. When a generator supplying the electric power to the grid is accidently tripped due to a disturbance on the systems, power system frequency suddenly drops during the transient period and this propagates from the location of the tripped generator to the other part of the systems like a wave. Since the propagation speed of the power system frequency depends on the own characteristics of power systems, its understanding from the perspective of the wide-area can help us in understanding power systems more correctly. In addition, the propagation speed of the power system frequency is used as a key parameter in the application study of IT based on the internet-based GPS synchronized frequency monitoring network (FENT) which has been recently implemented and operated in U.S. power systems. This paper simulates the generation trip on various locations in U.S. power systems deploying its latest dynamic model and calculates the propagation speed of the power system frequency for the application of FNET.

• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.39-46
• /
• 2019

Purpose: This study aimed to evaluate the effects of i) the extent of peri-implant bone defects and ii) the application of bone cement on implant stability with respect to the measurement direction. Methods: In 10 bovine rib bones, 4 implant osteotomies with peri-implant bone defects of various widths were prepared: i) no defect (D0), ii) a 2-mm-wide defect (D2), iii) a 4-mm-wide defect (D4), and iv) a 8-mm-wide defect (D8). The height of all defects was 10 mm. Implant stability quotient (ISQ) values and Periotest values (PTVs) were measured after implant placement and bone cement application. Results: With increasing defect width, decreased ISQs and increased PTVs were observed. Statistically significant differences were found between groups D0 and D8, D0 and D4, and D2 and D8. Prior to bone cement application, inconsistent PTVs were found in group D8 depending on the measurement direction. Bone cement increased the implant stability. Conclusion: Peri-implant bone deficits measuring around 50% of the implant surface compromised implant stability. Clinically, PTVs should be cautiously interpreted in implants with large peri-implant defects due to inconsistent recordings with respect to the measurement direction.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3113-3113
• /
• 2001

Some two years ago our company undertook a project on manufacturing network rationalization to maximize competitiveness through continuous improvement in manufacturing efficiency. One key outcome was the recognition of the benefits that could be derived from timely application of new technology or novel use of existing technologies and even more importantly the need to develop company wide strategies to maximize the impact of such applications. As a direct result an exercise was undertaken to identify the ten most promising technologies from a list of literally hundreds seen as having the capability of making a rapid impact on the manufacturing initiative. One of the outcomes of this exercise was the identification of Near Infrared Spectroscopy as a pivotal technology for improving process understanding, performance, and control to deliver consistent product quality cost effectively with broad applicability across our product range. While NIR had been in use in targeted areas on some of our sites for some years our new challenge was to develop a strategy to extend NIRs application, initially over 17 manufacturing sites, while concurrently expanding the NIR skill base company wide to ensure that the return on initial investment could be further maximized as shared applications across the remaining sites as required. This presentation will provide an overview of how life cycle based user requirement specifications were developed covering: ㆍSpectrophotometers ㆍSample interfaces ㆍSoftware ㆍEquipment and Software qualification ㆍCalibration transfer ㆍ Ease of developing effective user interfaces and control for applications transferred to a production area ㆍUser training ㆍWorld wide support The presentation will also describe the process adopted for vendor selection to ensure maximum utilization of the existing company wide NIR skill base and its future development to expedite applications of the technology in development, quality control and production areas.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.26-33
• /
• 2008

The analysis of wide-angle seismic reflection and refraction data plays an important role in lithospheric-scale crustal structure study. However, it is extremely difficult to develop an appropriate velocity structure model directly from the observed data, and we have to improve the structure model step by step, because the crustal structure analysis is an intrinsically non-linear problem. There are several subjective processes in wide-angle crustal structure modelling, such as phase identification and trial-and-error forward modelling. Because these subjective processes in wide-angle data analysis reduce the uniqueness and credibility of the resultant models, it is important to reduce subjectivity in the analysis procedure. From this point of view, we describe two software tools, PASTEUP and MODELING, to be used for developing crustal structure models. PASTEUP is an interactive application that facilitates the plotting of record sections, analysis of wide-angle seismic data, and picking of phases. PASTEUP is equipped with various filters and analysis functions to enhance signal-to-noise ratio and to help phase identification. MODELING is an interactive application for editing velocity models, and ray-tracing. Synthetic traveltimes computed by the MODELING application can be directly compared with the observed waveforms in the PASTEUP application. This reduces subjectivity in crustal structure modelling because traveltime picking, which is one of the most subjective process in the crustal structure analysis, is not required. MODELING can convert an editable layered structure model into two-way traveltimes which can be compared with time-sections of Multi Channel Seismic (MCS) reflection data. Direct comparison between the structure model of wide-angle data with the reflection data will give the model more credibility. In addition, both PASTEUP and MODELING are efficient tools for handling a large dataset. These software tools help us develop more plausible lithospheric-scale structure models using wide-angle seismic data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.605-608
• /
• 2006

The recent application of wide band gap oxide semiconductors to transparent thin film transistors (TTFTs) is making a fast and growing (r)evolution on the contemporary solid-state electronics. In this paper we present some of the recent results we have obtained using wide band gap oxide semiconductors, like indium zinc oxide, produced by rf sputtering at room temperature. The devices work in the enhancement mode and exhibit excellent saturation drain currents. On-off ratios above $10^6$ are achieved. The optical transmittance data in the visible range reveals average transmittance higher than 80 %, including the glass substrate. Channel mobilities are also quite respectable, with some devices presenting values around $25\;cm^2/Vs$, even without any annealing or other post deposition improvement processes. The high performances presented by these TTFTs associated to a high electron mobility, at least two orders of magnitude higher than that of conventional amorphous silicon TFTs and a low threshold voltage, opens new doors for applications in flexible, wearable, disposable portable electronics as well as battery-powered applications.