• 펄프종이기술
• /
• 제35권2호
• /
• pp.12-17
• /
• 2003

The effects of wet pressing and drying conditions on the disintegration and physical properties of paper were investigated in order to get the basic information on the resistance of paper for aqueous solution during converting processes. Wet pressing of unbeaten bleached softwood kraft pulp increased WRV at the range of grammage investigated. The increase of WRV with grammage at low wet pressing pressure(50 psi) was obvious, while it was not significant at higher wet pressing pressure(110 psi). The changes of WRV by drying were affected by the grammage and wet pressing pressure. The poorer disintegration of sheet, the higher wet pressing pressure and drying temperature. Although the strength properties were increased with the grammage, wet pressing pressure and drying temperature, results showed different trend from those of beaten pulp.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.21-27
• /
• 2012

The effects of fines contents in OCC stock on the wet pressing process were evaluated in this study. The fines were collected from the beaten OCC stock by using 200 mesh. The dryness of handsheet samples after the couch and after the 1st wet press were greatly affected by the fine contents of the OCC stock. The higher contents of fines resulted in the lower value in dryness but the higher value of density followed by the higher strength properties. The addition of the retention aids and the drainage aids on the OCC stocks showed the wet pressing efficiency were greatly affected by the fine contents rather than the addition of polymer additives. The increase in the fine retention by the polymer additives offset the improvement in the wet pressing efficiency originated from the polymer additives.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.32-37
• /
• 2005

To Increase the productivity of a paper machine, the maximization of the machine speed is a kind of simple way As the machine speed increases, more intense wet pressing is required to persist the outlet consistency of press part and reduce the water removal of dryer part. With more intense pressing, there are concerns that the quality of paper will be affected. This study was carried out to evaluate the influence of wet-pressing on internal structure of paper, The nip pressure at the first and third nip in triple nip press was controlled. Paper structures, strength properties and pore properties were evaluated. As a result, first nip pressure more strongly influenced the paper structural properties than third nip pressure in triple nip pressing condition. Because of the high water content and low wet-web strength of paper web in first nip, increasing the first nip pressure induced the incipient crushing of wet-web and then caused a potential of web break during the following coating or printing processes.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.85-90
• /
• 2012

Wet pressing process has great influence not only on the paper properties but also on the efficiency of total manufacturing process including energy efficiency. The slow drainage propensity of old corrugated container(OCC) might require more complicated control of wet pressing process. In this study, the change in press efficiency and in structure of wet sheet by the various condition of laboratory roll press simulator were evaluated to provide background information about wet pressing of OCC. The higher pressure and the slower machine speed resulted in higher efficiency of wet pressing but the change trends of dryness depending on the wet press pressure and machine speed were shown differently according to OCC treatment. The effects of water contents of felt on the wet press efficiency and sheet structure were also investigated. The higher contents of water in felt resulted in less removal of water generally and the crushed structure of wet sheet were appeared especially at higher pressure.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.31-39
• /
• 2011

One of the main drawbacks of wood fibers based composite materials are their tendency to swell due to moisture uptake in wet and moist environments. The main contribution to the hygroexpansion usually comes from the hydrophilic wood fibers. Recent trend toward the high speed printing, copying, and precision converting precesses demands a high level of dimensional stability under various environmental conditions. The purpose of this study was to investigate the dimensional stability of softwood bleached kraft pulp handsheets depending on wet pressing conditions. By increasing the number of wet pressing, dimensional stability was decreased because of increased fiber-to-fiber bonding. Hygroexpansion of handsheets had a linear relationship with the relative bonded area and equilibrium moisture contents. Dip elongation was decreased when the number of wet pressing was increased because of increased fiber-to-fiber bonding to resist low load in water.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.9-15
• /
• 2004

To increase paper strength, refining and wet pressing are performed. Many researches were carried out to identify the origin of paper strength. Since fracture toughness was governed by stress concentration, fracture toughness reflects microscopic paper strength. The aim of this paper is to analyze how paper strength was affected by changes of refining and wet-pressing. Fiber properties and structural, tensile and fracture properties of hand­sheets were evaluated. Especially, fracture toughness was evaluated by J-integral. As the refining proceeds, stock properties maybe divided into two stages such as fibers activation and fines activation according to freeness. In fibers activation stages, about 750-450 mL CSF, the fracture toughness increased with refining and wet pressing but in fines activation stages, about 450-250 mL CSF, the fracture toughness increased only with wet pressing. It is clear that fracture toughness was affected not only by fibers properties but also by fines properties in fines activation stages.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.24-33
• /
• 2015

Linerboards containing wood flours were developed to increase solid contents in wet pressing process. Presence of wood flours in recycled fibers allowed passage of pressurized water at high wet pressing pressure, and increased solid contents while keeping the bulk of the board. The amount of wood flour addition should be controlled based on the intensity of the wet pressing pressure and the properties of the wood flours. Addition of cationic starch to the wood flour containing OCC furnish showed synergic increase of solid content and strength properties. Shapes of the wood flours such as spherical and rod type added to OCC furnish affected largely their solid content, drainage, and board physical properties.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.77-82
• /
• 2011

The changes in the wet pressing response of old corrugated container(OCC) stock depending on the beating treatment and the addition of polymer aids were investigated with laboratory roll press instrument. Two types of polymer aids, such as high molecular weight polymer with low charge density and low molecular weight polymer with high charge density, were applied in this study. The more beaten OCC stock showed the lower dryness after wet pressing. The addition of polymer aids had great influences on the wet pressing efficiency and paper properties. The dryness after wet pressing was increased by the addition of polymer aids, but the pattern of changes in dryness were different depending on the type of polymer and the properties of stock. The higher molecular weight polymer aids showed the greater increase in the dryness. The properties of paper such as air permeability, bulk, formation, tensile strength were also greatly affected by the addition of polymer aids.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.8-15
• /
• 2014

The increase of wet web solid content in wet pressing will save drying energy greatly. We applied wood flours as spacers to increase the old corrugated container (OCC) solid contents in wet pressing. The mixed furnish of OCC and wood flours of 3-5% (wt/wt) increased bulk and drainage rate, and by increasing wet pressing pressure, its solid content started to be higher than 100% OCC furnish at more than 50% solid content level. Addition of cationic starch and drainage aid to the mixed furnish increased solid content further up to around 2%. Cationic starch addition compensated or exceeded the loss of tensile and compressive strength caused by the addition of wood flour, but drainage aid did not. Cationic starch also improved the stretch of the OCC, which could mitigate cracking at folding in boxboard.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.17-26
• /
• 2011

Drying behavior and physical properties of HwBKP, SwBKP, and OCC handsheets depending on kneading, refining and wet pressing were analyzed. The maximum drying shrinkage velocity was newly adopted to verify the effect of mechanical treatment of pulps by evaluating drying behavior according to varying the kneading, refining and wet pressing treatments. Those various treatments were changed to evaluate the relationship between the maximum drying shrinkage velocity and handsheets properties. When the drying shrinkage and the maximum drying velocity increased by refining and wet-pressing, handsheets strength was increased. The maximum drying shrinkage velocity showed higher correlation with physical properties of paper than WRV at different refining loads at SwBKP and mixed pulp. At high wet-web dryness, drying shrinkage, the maximum drying shrinkage velocity and strength properties of handsheet were increased. It meant that drying shrinkage behavior was highly affected by not only fibers' shrinkage but also fiber bonding. Kneading pre-treatment for KOCC and SwBKP effectively modified fiber properties and increasing paper strength and drying shrinkage. The effect of kneading pre-treatment was also confirmed by the maximum drying shrinkage velocity. Strength properties of mixed pulp handsheets were not increased by the kneading pre-treatment, although the maximum drying shrinkage velocity and WRV was increased. It meant that fibers network bonding of HwBKP was limited because of ves sels and ray cells' interference for bonding. Therefore in order to improve paper strengths containing HwBKP by mechanical treatments, interference of vessels and ray cells for fiber bondings should be carefully controlled.