펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

롤프레스를 적용한 골판지 고지지료의 압착탈수특성평가

Evaluation of Wet Pressing Response of Recycled OCC with Roll Press Simulator

  • 성용주 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 정웅기 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 김동섭 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 오민택 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 홍해은 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 서영범 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 임창국 (동일제지주식회사) ;
  • 권완오 (동일제지주식회사) ;
  • 김진두 (동일제지주식회사)
  • Sung, Yong-Joo (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Jeong, Wong-Ki (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Kim, Dong-Seop (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Oh, Min-Taek (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Hong, Hae-Un (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Seo, Yong-Bum (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Im, Chang-Kuk (Dongil Paper Company Inc.) ;
  • Gwon, Wan-Oh (Dongil Paper Company Inc.) ;
  • Kim, Jin-Doo (Dongil Paper Company Inc.)
  • 투고 : 2012.08.03
  • 심사 : 2012.08.20
  • 발행 : 2012.08.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Wet pressing process has great influence not only on the paper properties but also on the efficiency of total manufacturing process including energy efficiency. The slow drainage propensity of old corrugated container(OCC) might require more complicated control of wet pressing process. In this study, the change in press efficiency and in structure of wet sheet by the various condition of laboratory roll press simulator were evaluated to provide background information about wet pressing of OCC. The higher pressure and the slower machine speed resulted in higher efficiency of wet pressing but the change trends of dryness depending on the wet press pressure and machine speed were shown differently according to OCC treatment. The effects of water contents of felt on the wet press efficiency and sheet structure were also investigated. The higher contents of water in felt resulted in less removal of water generally and the crushed structure of wet sheet were appeared especially at higher pressure.

키워드

참고문헌

  1. Hur, Y. D., Lee, S. G., Lee, H. L., Youn, H. J., High Consistency Pulping Treatment of Fractionated OCC Pulp for Improving Strength, Journal of Korea TAPPI, 37(4): 18-25 (2005).
  2. 이학래, 윤혜정, 강태영, 서만석, 허용대, KOCC 지료의 분급 및 기계적 처리가 종이의 물성에 미치는 영향, 한국펄프.종이공학회 2002년 추계학술발표 논문집, pp.205-206 (2002).
  3. Phipps, J., The effects of recycling on the strength properties of paper, Paper technology, ECC int., pp. 34-40 (1994).
  4. 이광표, 류정용, 송봉근, 박종문, 점착성 이물질 제어를 통한 OCC 재활용 공정의 생산효율 개선, 한국펄프.종이공학회 2010년 춘계학술발표 논문집, pp.168-173 (2010).
  5. 서동준, 제지업체의 에너지 절감 추진 동향, 한국펄프종이공학회 2009년 콜로퀴엄 학술대회 논문집,, pp.47-67 (2009).
  6. Sung. Y. J., Kim. D. S., Um. K. J., Lee. J. W,. Kim. S. B., Park. K. S., Action Plans of Paper Industry Correspond to the Carbon Dioxide Emission Trading Market, Journal of Korea TAPPI, 44(1): 1-13 (2012). https://doi.org/10.7584/ktappi.2012.44.1.001
  7. 성용주, D. Steven Keller, 습지압착 조건에 따른 압착 탈수 공정 효율과 종이구조변화, 한국펄프.종이공학회 2010년 춘계학술발표논문집, pp. 8-15 (2010).
  8. Paulapuro, H., Wet pressing, In Papermaking Part 1, Stock Preparation and Wet End, Paulapuro, H(ed,). TAPPI PRESS, USA, pp.284-340 (2000).
  9. Lee, H. L., Youn, H. J., Kang, T. Y., and Choi, I.S., Effect of fines distribution on press dewatering and physical properties of multi-ply sheet, Journal of Korea TAPPI, 40(5):36-41 (2008).
  10. Springer, A., Nabors, L. A., and Bhatia, O., The influence of fiber, sheet structural properties, and chemical additives on wet pressing, TAPPI Journal, 74(4):221-228 (1991).
  11. Sung, Y. J., Lee, H. B-R., Jeong, W. K., Jung, J. G., Choi, S. G., Im, C. K., Gwon, W. O., Seo, Y. B., Changes in Wet Pressing Response of OCC stock by the Beating Time and the Addition of Polymer Aids, Journal of Korea TAPPI, 43(2): 77-82 (2012).
  12. Lee, J. H., Park, J. M., Changes of HwBKP, SwBKP, OCC Handsheets' Drying Behavior and Physical Properties by Refining, Kneading and Wet Pressing, Journal of Korea TAPPI, 43(5): 17-26 (2012).

피인용 문헌

  1. 미세분 함량에 따른 골판지원지의 압착탈수 특성 vol.44, pp.6, 2012, https://doi.org/10.7584/ktappi.2012.44.6.021
  2. 탄산칼슘 적용에 의한 KOCC 지필의 고형분 증대 vol.45, pp.6, 2012, https://doi.org/10.7584/ktappi.2013.45.6.001