• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.121-125
• /
• 2013

In this work, we prepared the carbon paper from chopped carbon fibers using a gas diffusion matrix in polymer electrolyte membrane fuel cells by wet processing. The process of making carbon paper using wet processing is consisted of the three steps involving the dispersion of chopped carbon fibers, the preparation of the carbon fiber web, the impregnating of phenol resin. This work was focused on finding the optimal surfactant to make the carbon paper with 2D orientation of carbon fibers by investigating the dispersion state of carbon fibers in different dispersion solutions. Furthermore, the effect of phenol resin and carbon black contents on properties of electric conductivity was analyzed. As a result, it is confirmed that the carbon fiber was well dispersed when using sodium dodecyl sulfate as a surfactant, and the carbon paper with 8 wt% of phenol and 5 wt% of carbon black contents showed the most excellent electrical property.

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.118-123
• /
• 2018

The hexagonal tungsten bronze $Cs_xWO_3$ nanoparticle was synthesized by a chemical coprecipitation method of ammonium tungstate and $Cs_2CO_3$ in acidic condition. This synthetic method for cesium tungsten bronze is reported for the first time as far as we know. The synthesized $Cs_xWO_3$ as precipitated showed a weak crystallinity of hexagonal unit cell with a crystallite size of about 4 nm without annealing. When the synthesized $Cs_xWO_3$ was annealed in $N_2$ atmosphere, the crystallinity and crystallite size systematically increased maintaining the typical hexagonal tungsten bronze structure as the annealing temperature increased. The analyzed Cs content in the bronze was about 0.3 vs W, which is very close to the theoretical maximum value, 1/3 in cesium tungsten bronze. According to XPS analysis, the reduced tungsten ions existed as both the forms of $W^{5+}$ and $W^{4+}$ and the contents systematically increased as the annealing temperature increased up to $800^{\circ}C$. The $Cs_xWO_3$ thin films on PET substrate were also prepared by a wet-coating method using the ball-milled solution of the annealed $Cs_xWO_3$ nanoparticles at various temperatures. The near-infrared shielding property of these thin films increased systematically as the annealing temperature increased up to $800^{\circ}C$ as expected with the increased contents of reduced tungsten ions.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.232-243
• /
• 2009

The specialized and diversified synthetic and compounding technologies are used to meet the requirements for the advanced high performance tire tread materials with better balance of fuel economy(rolling resistance), safety(wet traction) and wear resistance. These techniques involve the methodology for the improvement of chemical and physical interaction between filler and the rubber matrix using coupling agents as well as a variety of chemically-modified solution SBRs. The research trends about the high performance functional SBRs and coupling agents which can interact with the surface of fillers and their working mechanism were investigated in the conventional carbon black-filled rubber and silica-filled SBR systems developed recently as "green tire".

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.359-361
• /
• 2003

Nano-porous alumina was investigated as a protecting layer in an AC Plasma Display Panel. A 2 ${\mu}m$ thick nano-porous $Al_2O_3$ layer inserted with MgO was formed on the dielectric layer instead of the conventional 500 nm-thick MgO thin film. Both nano-porous $Al_2O_3$layer and inserted MgO were prepared by wet process. The luminance and luminous efficiency of 3-inch test panel adopting nano-porous $Al_2O_3$ was higher than that of the conventional PDP.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.34-35
• /
• 1997

The phase inversion is a significant phenomena in the preparation of membranes and wet spinning. In both these processes, a viscous dope solution is precipitated in a nonsolvent bath and a porous structure is formed under certain conditions. Such structure could have been considered as a diffusion controlled process. The membrane formation of the polymer solution includes both phase separation and gelation. We have studied the influence of variables on the final structure and tried to control the porosity and ultrafiltration(UF) performance of the polyacrylonitrile(PAN) and its copolymer.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.4 s.29
• /
• pp.93-98
• /
• 2005

A aggregate size distribution of soils is an important in successful crop production in reclaimed tidelands. The aggregate size distribution for this study were determined of 0.1mm, 0.25mm, 0.5mm, 1.0mm, and 2.0mm by wet sieving method. Agricultural activity, period of reclamation showed significant effects on aggregate size distribution in reclaimed tidelands. Aggregate MWD was greater in SS and KH(above 1.0m) than in YSG, GHD, SMG, and DH(below 0.5mm) reclaimed tidelands and tidelands. The percentage of aggregates less than < 2mm for SMG, GHD, and SM reclaimed tidelands and tidelands were ranged 8.9%, 36.7%, and 38.0%, respectively. The percentage of > 0.1mm aggregates for SMG, GHD, and SM reclaimed tidelands were ranged 9.0%, 26.0%, and 48.9%, respectively. Results indicated that aggregate size distribution of reclaimed tidelands and tidelands under various agricultural systems vary with reclamation period and soil type.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.186-196
• /
• 2020

Pillared clays with Zr and Fe/Cu/Zr polycations have been prepared from natural clays found in large deposits of Kazakhstan and assessed as catalysts for the catalytic wet peroxide oxidation (CWPO), using 4-nitrophenol (4-NP) as model compound. The performance of the catalysts was followed by measuring the concentration of 4-NP, H₂O₂ and the total organic carbon (TOC), considering C_4-NP = 5 g L^-1, $C_{H_2O_2}$ = 17.8 g L^-1, C_cat = 2.5 g L^-1, initial pH = 3.0 and T = 50℃. At those selected conditions, the pillared clays showed higher activity than natural clays in the CWPO of 4-NP. The conversion of the model pollutant was complete when Fe/Cu/Zr-PILCs were used, with the TOC removal reaching 78.4% after 24 h with the best Fe/Cu/Zr-PILC. The H₂O₂, 4-NP and TOC time-evolution was well described by a kinetic model based on TOC lumps in three blocks, considering the initial TOC (corresponding to 4-NP), the production of oxidizable intermediates and the formation of refractory products.

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1252-1260
• /
• 1999

The defect chemistry and electrical characteristics of the grain boundaries of semiconducting SrTiO3 ceramics synthesized with wet-chemically surface-coated powders were investigated. The starting powders were separated into groups of 1-10${\mu}{\textrm}{m}$ 10-20${\mu}{\textrm}{m}$ etc by sedimentation and sieving methods. Na+ ions were absorbed on the powder surfaces by wet chemical-treatment method. The width of the grain boundary ranged up to several nm and the intergranular materials was amorphous. The additives coated on the surface of the powders were observed to be present at the grain boundaries of the ceramics. The diffusion depth of the additives into grains was about 30nm for the SrTiO3 ceramics synthesized with 5w/o coated materials, The threshold voltage grain boundary resistance and boundary potential barrier of the ceramics increased from 0.67V/cm 2.27k$\Omega$ and 0.05eV to 80.9V/cm 13.0k$\Omega$ 1.44eV with increasing the amount of the additives from 0 to 5 w/o respectively .

• Journal of the Korean Chemical Society
• /
• v.63 no.2
• /
• pp.94-101
• /
• 2019

Nb, Mo-doped and Nb/Mo-codoped $VO_2(M)$ nanocrystallites with various doping levels were synthesized for the first time by a hydrothermal and post thermal transformation method. The reversible phase transition characteristics of those doped $VO_2(M)$ was comparatively investigated. Nb-doping of $VO_2(M)$ by this method resulted in a very efficient lowering of the transition temperature ($T_c$) with a rate of $-16.7^{\circ}C/at.%$ that is comparable to W-doping, while Mo-doping did not give a serious reduction of $T_c$ with only a rate of $-5.1^{\circ}C/at.%$. Nb/Mo-codoping gave a similar result to Nb-doping without a noticeable difference. The thin films of Nb-doped and Nb/Mo-codoped $VO_2(M)$ with a thickness of ca. 120 nm were prepared by a wet-coating of the nanoparticle-dispersed solutions. Those films showed a good thermochromic modulation of near infrared radiation with 30-35% for Nb-doped $VO_2(M)$ and 37-40% for Nb/Mo-codoped ones. Nb/Mo-codoped $VO_2(M)$ film showed slightly enhanced thermochromic performance compared with Nb-doped $VO_2(M)$ film.

• Prospectives of Industrial Chemistry
• /
• v.22 no.5
• /
• pp.14-24
• /
• 2019

전 세계적인 기후변화로 인하여 선박 내 이용되는 물과 관련된 배출 규제도 매년 강화되고 있는 추세이다. 심해지는 규제를 만족하기 위하여 다양한 선박용 수처리 기술이 개발되고 있으며, 고도화 연구가 활발히 진행되고 있다. 본 연구에서는 선박 내에서 이루어지는 수처리 공정인 선박 평형수(ballast water)처리, 조수기(fresh water generator)를 통한 선박 내 용수 공급, 대기오염 저감을 위한 스크러버(wet scrubber) 폐세정수 처리 공정과 관련된 국제해사기구(international maritime organication, IMO)와 같은 국제적인 규제 및 특정지역과 연안에 위치한 주정부 기관의 규제 현황에 대해 문헌조사를 통해 정리하였다. 이를 바탕으로 다양한 선박 내 수자원 활용과 규제에 부합하기 위해 적용되고 있는 관련 수처리 기술을 용도별로 정리하였으며, 현재 기존기술의 효율 개선 및 신기술 도입과 관련된 연구 현황을 정리하였다. 이러한 선박 내 수처리 현황 및 향후 적용될 기술개발연구를 바탕으로 지속가능한 해양환경 조성 및 기후변화 대응이 가능할 것으로 기대된다.