• 제목/요약/키워드: wet chemistry

검색결과 266건 처리시간 0.027초

펙틴/전분 블렌드 필름의 기계적 물성 및 형태학 (Mechanical Properties and Morphology of Pectin/Starch Blend Films)

  • 신부영
    • 공업화학
    • /
    • 제10권7호
    • /
    • pp.1008-1013
    • /
    • 1999
  • 펙틴/전분 블렌드의 열가소성과 펙틴/전분 비와 가소제 함량이 블렌드의 기계적 물성과 형태에 미치는 영향을 조사하였다. 블렌드는 이축 압출기로 제조하였으며 시험용 필름은 슬릿 다이가 부착된 일축 압출기로 제조하였다. 대부분의 블렌드는 열가소성 성질을 가지고 있었으나, 펙틴/전분비가 아주 높은 블렌드는 열가소성 성질이 매우 약하였다. 필름의 인장 물성은 가소제인 글리세롤의 함량에는 크게 변화였으나 펙틴/전분 비의 변화에 대하여는 상대적으로 적게 변화하였다. 습조성 블렌드의 DSC 곡선은 $125^{\circ}C$에서 유리전이온도와 유사한 전이온도를 포함하고 있었다. 파단면의 전자현미경사진은 펙틴과 전분의 계면에서는 접착 현상이 좋다는 것을 보여주었다.

  • PDF

Immobilized Small Sized Manganese Dioxide Sand in the Remediation of Arsenic Contaminated Water

  • Tiwari, Diwakar;Laldawngliana, C.;Lee, Seung-Mok
    • Environmental Engineering Research
    • /
    • 제19권1호
    • /
    • pp.107-113
    • /
    • 2014
  • Small sized manganese dioxide particles are immobilized onto the surface of sand by the wet impregnation process. The surface morphology of the solid, i.e., immobilized manganese dioxide natural sand (IMNS) is performed by taking scanning electron microscope images and characterized by the X-ray diffraction data. The specific surface area of the solid is obtained, which shows a significant increase in the specific surface area obtained by the immobilization of manganese dioxide. The $pH_{PZC}$ (point of zero charge) is found to be 6.28. Further, the IMNS is assessed in the removal of As(III) and As(V) pollutants from aqueous solutions under the batch and column operations. Batch reactor experiments are conducted for various physicochemical parametric studies, viz. the effect of sorptive pH (pH 2.0-10.0), concentration (1.0-25.0 mg/L), and background electrolyte concentrations (0.0001-0.1 mol/L $NaNO_3$). Further, column experiments are conducted to obtain the efficiency of IMNS under dynamic conditions. The breakthrough data obtained by the column experiments are employed in non-linear fitting to the Thomas equation, so as to estimate the loading capacity of the column for As(III) and As(V).

젖소 사료로서의 맥콜박 이용 가능성에 관한 연구 (Studies on the Possibility of the Utilization of Macol Meal as Feedstuffs for Cattle)

  • 성재기
    • 한국임상수의학회지
    • /
    • 제11권2호
    • /
    • pp.553-560
    • /
    • 1994
  • This experiment was conducted to evaluate the feed value of Macol meal, which is one of the byproducts from the extraction of liquid syrup from barley grain, on lactating dairy cows. All of the lactating dairy cows feeding in eight dairy farms were used in feeding experiment and fed concentrates plus Macol meal 5Kg as wet basis. The milk yields and milk fit during the periods of 10 months were investigated and blood picture, blood chemistry and diseases occuring frequency before and after feeding Macol meal were analyzed. The results obtained were as follows ; 1. In the proximate compositions, the contents of moisture, crude protein, crude fat, crude fiber, crude as and nitrogen free extracts was 68.8%, 7.43%, 1.04%, 7.08%, 1.56% and 14.09% respectively. On the other hand, the contents of NDF, ADF and cellulose was 36.68%, 35.71% and 10.85%, as dry matter basis, respectively. 2. The daily milk yield per head was 22.84kg during two months before feeding Macol meal and 23.89 kg during the periods of ten months after feeding Macol meal. 3. The blood picture and blood chemistry were not affected by feeding Macol meal. 4. The diseases occuring frequency were not significantly affected by feeding Macol meal. from the results of this experiment it could be concluded that Macol meal can be used in lactating dairy cows rations without any adverse effects.

  • PDF

메타아크릴레이트 실란을 이용한 유리섬유 강화복합재료의 물성향상 (The Adhesion Promotion of Glass Fiber Reinforced Composite Using Methacrylate Functional Silanes)

  • 장정식
    • 공업화학
    • /
    • 제1권2호
    • /
    • pp.133-139
    • /
    • 1990
  • 서로 다른 스페이서기를 가지는 메타아크릴레이트 실란을 합성하여, 유리섬유 표면위에서 이들의 흡착거동 및 배향에 관한 FI-IR을 이용하여 연구하였다. 유리섬유/불포화 폴리에스테르 복합재료의 기계적 물성은 유리섬유 표면을 처리한 실란 카플링제의 스페이서기에 의해 크게 영향을 받았다. 실리카 표면에서의 실란 카플링제의 등온 흡착율은 메타아크릴레이트 실란의 메틸렌 스페이서기가 증가함에 따라 감소하였다. 긴 스페이서기를 가지는 실란 분자는 흡착 매체 표면에 활궁처럼 휜상태로 흡착하였다. 유리섬유/불포화 폴리에스테르 복합재료의 고온 습윤 강도를 증진시키기 위해 실란카플링제의 분자 구조와 기계적 물성과의 상관 관계에 대해서도 연구가 병행되었다.

  • PDF

[Hmim][PF6]를 사용한 벤질 알코올의 호기성 산화반응용 팔라듐-은 차콜 촉매 제조 (Synthesis of Pd-Ag on Charcoal Catalyst for Aerobic Benzyl Alcohol Oxidation Using [Hmim][PF6])

  • 추연준;유계상
    • 공업화학
    • /
    • 제25권4호
    • /
    • pp.425-429
    • /
    • 2014
  • 호기성 벤질 알코올 산화반응용 상용촉매 개발을 위하여 팔라듐이 담지된 차콜 입자를 제조하였다. 특히 촉매의 팔라듐 분산도를 높이기 위해서 상온 이온성액체 중 하나인 [Hmim][$PF_6$]을 기능성 용매로 사용하여 입자를 합성하였다. 다양한 농도의 팔라듐을 함침하여 제조된 입자의 반응성을 측정한 결과 7.5 wt%의 촉매가 가장 우수한 반응 활성과 안정성을 나타내었다. 또한 조촉매로서 다양한 농도의 은입자를 합침하여 촉매를 제조하였다. 동일한 반응조건에서 팔라듐과 은의 질량 비율이 9 : 1인 촉매가 높은 금속 분산도로 인하여 가장 반응성이 우수하였다.

Aerobic Benzyl Alcohol Oxidation 반응용 Ag/TiO2 제조 (Preparation of Ag/TiO2 Particle for Aerobic Benzyl Alcohol Oxidation)

  • 김창수;유계상
    • 공업화학
    • /
    • 제24권6호
    • /
    • pp.663-667
    • /
    • 2013
  • 다양한 이온성 액체를 사용하여 은이 담지된 이산화티타늄 입자를 제조하였다. 합성에 사용된 이온성 액체의 종류에 따라 입자의 물성이 변하는 것을 관찰하였다. 이는 이온성 액체의 특성이 은 입자들의 결합에 영향을 주기 때문이다. 제조된 입자의 촉매 성능을 측정하기 위하여 산소분위기에서 벤질알코올의 산화반응을 실시하였다. 그 결과 1-octyl-3-methylimidazolium tetrafluoroborate를 이용하여 합성한 $Ag/TiO_2$ 입자가 가장 우수한 촉매 활성을 나타내었다.

Fabrication and Characterization of Dodecyl-derivatized Silicon Nanowires for Preventing Aggregation

  • Shin, Donghee;Sohn, Honglae
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권11호
    • /
    • pp.3451-3455
    • /
    • 2013
  • Single-crystalline silicon nanowires (SiNWs) were fabricated by using an electroless metal-assisted etching of bulk silicon wafers with silver nanoparticles obtained by wet electroless deposition. The etching of SiNWs is based on sequential treatment in aqueous solutions of silver nitrate followed by hydrofluoric acid and hydrogen peroxide. SEM observation shows that well-aligned nanowire arrays perpendicular to the surface of the Si substrate were produced. Free-standing SiNWs were then obtained using ultrasono-method in toluene. Alkyl-derivatized SiNWs were prepared to prevent the aggregation of SiNWs and obtained from the reaction of SiNWs and dodecene via hydrosilylation. Optical characterizations of SiNWs were achieved by FT-IR spectroscopy and indicated that the surface of SiNWs is terminated with hydrogen for fresh SiNWs and with dodecyl group for dodecyl-derivatized SiNWs, respectively. The main structures of dodecyl-derivatized SiNWs are wires and rods and their thicknesses of rods and wire are typically 150-250 and 10-20 nm, respectively. The morphology and chemical state of dodecyl-derivatized SiNWs are characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

${Y_2}{SiO_5}:Ce$ 청색 형광체의 졸-겔 합성 및 발광특성 (Sol- Gel Synthesis and Luminescent Properties of ${Y_2}{SiO_5}:Ce$ Blue Phosphors)

  • 이준;한정화;박희동;윤석승
    • 한국재료학회지
    • /
    • 제11권9호
    • /
    • pp.740-744
    • /
    • 2001
  • The $Y_2SiO_5:Ce$ phosphors were synthesized by sol-gel technique in order to improve the performance of blue emitting phosphors for field emission display(FED). The resulted$Y_2SiO_5:Ce$ phosphors enhanced the emission intensity. In addition, calcination temperature of sol-gel technique(1300~140$0^{\circ}C$) was lower than that of the solid state reaction(>1$600^{\circ}C$). Under 365 nm and low voltage electron excitations. $Ce^{3+}$ -activated $Y_2SiO_5$phosphors showed blue emission band with a range of 400~ 430nm. Especially, 2mol% $Ce^{3+}$ doped $Y_2SiO_5:Ce$phosphors showed the maximum emission intensity. We have also controlled drying temperature of wet gel, pH, and $H_2O$/TEOS molar ratio for the optimum condition of TEOS hydrolysis.

  • PDF

CMP (Chemical Mechanical Polishing) characteristics of langasite single crystals for SAW filter applications

  • Jang, Min-Chul;An, Jin-Ho;Kim, Jong-Cheol;Auh, Keun-Ho
    • 한국결정성장학회지
    • /
    • 제10권4호
    • /
    • pp.309-317
    • /
    • 2000
  • Langasite is a promising new piezoelectric material for SAW filter application. Little was known until recently about the methods needed to mechanically polish and chemically polish/etch this material. In this experiment, polishing, slurry chemistry and chemical wet etching for langasite is described. Conventional quartz and LN ($LiNbO_3$) polishing methods did not produce satisfactory polished surfaces, and polishing with a colloidal silica slurries has shown to be most effective. The optimum condition was investigated by changing the slurry chemistry. As the planarization effect is very important in SAW filter applications, the examination of the effective particle number effect and the particle size effect was carried out. Z-cut langasite surface which had been polished with the colloidal silica slurries was etched in a variety of etchants. Conventional quartz etchants destroyed the polished surface. Other etchants formed a thin film on the surfaces. In this experiment, the reaction between langasite and a few etching solution was analysed. And an appropriate selective etchant solution for analyzing the defects was synthesized.

  • PDF

자연계에 존재하는 다기능성 소재 : 멜라닌 (Melanin: A Naturally Existing Multifunctional Material)

  • 엄태식;우경배;심봉섭
    • 공업화학
    • /
    • 제27권2호
    • /
    • pp.115-122
    • /
    • 2016
  • 사람의 머리카락, 눈, 피부 등에서 발견되는 멜라닌은 자연의 생물체에 존재하는 어두운 색소를 가르치는 통칭이다. 멜라닌은 자유 라디컬을 흡수해서 제거하는 특성을 가지고 있어, 해로운 UV 광선이 생체로 침투할 때, 세포 및 조직을 보호하는 역할을 한다. 또한, 전기적 전도성 및 이온 전도성을 가지고 있으며, 항산화성, 젖은 상태에서의 접착성, 금속이온 킬레이팅 등 다기능성으로 인해, 다양한 분야에서의 응용이 주목받고 있다. 자연계에 존재하는 생체 멜라닌의 구조를 정확하게 정의할 수는 없지만, 멜라닌의 응용 분야는 센서, 의료기기 등으로 확대되고 있다. 본 미니총설에서는 멜라닌의 원천과 합성, 구조와 특성, 그리고 다양한 분야로의 응용 가능성에 대해서 구체적으로 논의한다.