• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.193-196
• /
• 1996

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.68-70
• /
• 1995

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.204-204
• /
• 2000

There are many weld defects such as surface crack, lack of fusion, and incomplete penetration(IP) in the butt joint weld of the existing steel bridges. The crack-like defects may significantly reduce the life of the structure. This paper presents the procedure and the results of the fatigue life assessment of the butt joints with weld defects in the existing steel girder bridge. The butt joint welds with incomplete penetration were instrumented with strain gages to determine the stress histogram under normal traffic. Based on the measured stress histogram the crack propagation analysis were performed for the fatigue life assessment. By using the suggested procedure and methodology, one can decide the time of periodic inspection and the necessity of repair of the butt joint welds with serious weld defects in the existing steel bridge. (Received October 1, 1999)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.77-85
• /
• 2000

There are many weld defects such as surface crack, lack of fusion, and incomplete penetration (IP) in the butt joint weld of existing steel bridges. The crack-like defects may significantly reduce the fatigue life of the structure. This paper presents the procedure and the results of the fatigue life assessment of the butt joints with weld defects in the existing steel girder bridge. The butt joint welds with incomplete penetration were instrumented with strain gages to determine the stress histogram under normal traffic. Based on the measured stress histogram the crack propagation analysis were performed for the fatigue life assessment. By using the suggested procedure and methodology, one can decide the time of periodic inspection and the necessity of repair of the butt joint welds with serious weld defects in the existing steel bridge.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.129-136
• /
• 2012

On this study, $CO_2$ gas, net of Ar gas, and mixed gas in solid wire(AWS ER 70S-6) and flux cored wire(AWS E71T-1) were used to weld on Mild steel(SS400). After the progress, the status changes of the welds in Mild steel(SS400) were investigated with compositional changes. For stable experiments, welding was conducted using the automatic feeder. Radiation testing, hardness testing, chemical composition analysis and penetrated cross-section were measured. Through these experiments, shapes of penetrated cross-section, chemical composition changes, and weld defects according to the variation of welding gas were known. Weld defects and weld cross-sectional shapes by the variation of the welding voltage were also detected.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.224-227
• /
• 2002

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.473-481
• /
• 2016

Thick plate is currently widely used in shipbuilding due to the increasing of size of ships. However, its use has increased welding groove angles and volume. The welder's technique must be good enough to improve productivity while preventing defects. Generally, the groove angle can be reduced to less than a flux-cored arc welding (FCAW) machine setting of $35{\pm}5^{\circ}$, requiring fewer welding passes while maintaining high productivity and reduced heat input. Therefore, welding technique can be prevented by improved mechanical properties and welding deformation. Welding defects such as lack of fusion (LF), lack of penetration (LP) and hot cracking should be considered when reducing the groove angle for related applications. In this study, a welding groove angle of $25{\pm}5^{\circ}$ is verified as suitable for FCAW design and fabrication. The experimental results confirm the effects on the strength characteristics of FCAW weldment when reducing groove angle to improve the productivity of shipbuilding industries.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.944-951
• /
• 2009

본 논문에서는 용접부에 존재하는 결함을 자동으로 검출하기 위해서 영상처리 알고리즘을 이용한다. 용접부는 조명에 민감하고 패턴이 불규칙해서 검출에 어려움이 있다. 그래서 두 가지 조명 조건으로 영상을 획득하고 2차에 걸쳐 알고리즘을 적용한다. 1차 알고리즘은 첫 번째 영상을 몇 개의 ROI로 분할 한 후, 분할된 영역들간의 명암도 분포의 유사도를 비교한다. 2차 알고리즘은 두 번째 영상에서 경계 정보를 검출하고 경계선 길이, 곡률, 기준선 범위를 계산한다. 제안한 알고리즘을 이용하여 실험한 결과 결함 검출과 분류에 뛰어난 성능을 보였다.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.60-68
• /
• 2007

It has been conducted by laser vision sensor for weldability estimation of front-bead after doing high speed butt laser welding of any condition. It has been developed a real time GUI(Graphic User Interface) system for weldability application in the basis of texts and field qualify levels. In the reference of bead imperfections, defects absolute position and defects intensity index of front-bead in the basis of formability reference, it has been produced a weldability estimation and defects intensity index of back-bead by back propagation neural network. In the result of by comparing measuring data by laser vision sensor of back-bead and data by back propagation neural network of one, it has been shown the similar results. Finally, under knowledge of welding condition in production line, it has been conducted a weldability estimation of back-bead only in knowledge of informations of front-bead data without using laser vision sensor or welding inspection experts and furthermore it can be used data for final inspection results of back-bead.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1270-1278
• /
• 2004

This paper describes the effectiveness of laser pulse shaping in eliminating weld defects such as porosity, cracks and undercuts in pulsed Nd:YAG laser welding. A large porosity was formed in a keyhole mode of deeply penetrated weld metal of any stainless steel. Solidification cracks were present in STS 310S with above 0.017%P and undercuts were formed in STS 303 with about 0.3%S. The conditions for the formation of porosity were determined in further detail in STS 316. With the objectives of obtaining a fundamental knowledge of formation and prevention of weld defects, the fusion and solidification behavior of a molten puddle was observed during laser spot welding of STS 310S through a high speed video photographing technique. It was deduced that cellular dendrite tips grew rapidly from the bottom to the surface, and consequently residual liquid remained at the grain boundaries in wide regions and enhanced the solidification cracking susceptibility. Several laser pulse shapes were investigated and optimum pulse shapes were proposed for the reduction and prevention of porosity and solidification cracking.