• Title/Summary/Keyword: weight loss rate

Search Result 1,016, Processing Time 0.115 seconds

Corrosion Damage Characteristics with Materials and Process Time in Ultrasonic-Chemical Decontamination of Immersion Type (침적식 초음파-화학 제염 시 재료 및 공정 시간에 따른 부식 손상 특성)

  • Lee, Seung-Jun;Hyun, Koangyong;Han, Min-Su;Kim, Seong-Jong
    • Journal of the Korean institute of surface engineering
    • /
    • v.51 no.5
    • /
    • pp.291-296
    • /
    • 2018
  • In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.

Effects of W Contents in Co Matrix of the Thermal Sprayed WC-Co on the Corrosion Behavior in Molten Zinc

  • Seong, Byeong-Geun;Hwang, Sun-Young;Kim, Kyoo-Young;Lee, Kee-Ahn
    • Corrosion Science and Technology
    • /
    • v.6 no.4
    • /
    • pp.147-153
    • /
    • 2007
  • This study sought to investigate the reaction of Co-binder containing tungsten with molten zinc. Four kinds of Co-W alloys (pure, 10%W, 20%W, 30%W) were prepared using the powder metallurgy method. The specimens were immersion-tested in molten pure zinc baths at $460^{\circ}C$. To evaluate the corrosion property in molten zinc, the weight loss of the specimen was measured after the immersion tests at different immersion times (10~300 min.). Co-10%W alloys, compared with pure cobalt, showed no effect of tungsten addition on the reaction rate in molten zinc. The relationship between the weight loss and the square root of immersion period represents a straight line in both pure cobalt and Co-10%W alloy. The Co-Zn reaction layer in Co- 1O%W alloy consists of $\gamma2$, $\gamma1$, $\gamma$ and ($\beta1$ phases. The rate of weight loss significantly increases and the weight loss behavior is not well accord with the linear relationship as the tungsten content in the Co-W alloy increases. The $\beta1$ layer was not formed on the Co-20%W alloy and neither was a stable Co-Zn intermetallic compound layer found on the Co-30%W alloy. The main cause of increase in reaction rate with increasing tungsten content is related with the instability of the Co-Zn reaction phases as seen on micro-structural analysis.

Study on the Status in Body Weight Loss Practice According to Age and Gender of Subjects with Experiences of Attempting to Lose Weight in Seoul (서울지역에 거주하는 체중 감량 시도자의 성별, 연령별 체중 조절 실태)

  • Doo, Mi-Ae;Kim, Yang-Ha
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.37 no.5
    • /
    • pp.571-577
    • /
    • 2008
  • Among current health-related problems, the issue of over-weight is considered one of the most important, fostering a national interest in body weight loss. In this study, an awareness of one's current body weight and previous experiences of body weight loss were analyzed according to age and gender. The subjects of the study were 720 people (male: 360 and female: 360) aged $10{\sim}60$ years with previous experiences of attempting to lose weight 1 year prior to this study. Anthropometrics, general characteristics, awareness of one’s current body weight, and the body weight loss practice were analyzed through a questionnaire. Approximately 73.2% of the subjects recognized themselves as obese, and 83.5% wished to lose weight. The older the subjects were, the frequency of attempting to lose weight was lower, and those who succeeded in losing weight maintained their reduced body weight for a longer period. Compared to male subjects, more female reported attempts of losing weight, but the period of maintaining their reduced weight was shorter. The older subjects reported a higher satisfaction rate of the weight loss methods they used, and few of them gained back the weight they lost. This phenomenon was especially more stronger among male than female subjects. From our studies, it may be concluded that attitudes concerning a person’s current body weight and body weight loss practice vary according to age and gender.

치석의 무기질 분석에 관한 연구

  • Kim, Hyun-Pung
    • The Journal of the Korean dental association
    • /
    • v.12 no.7
    • /
    • pp.521-526
    • /
    • 1974
  • This observation was carried out to investigate the inorganic constituents of dental calculus of varying locations and different ages. Supragingival calculus was obtained from 540 patients with the periodontal disease. The results were as follows : 1. The weight loss rate in ashing by aging was the highest in the 2nd decade (63.7%) and followed in order by 3rd decade (60.8%), seventh decade 959.8%), fourth decade (55.9%), sixth decade (52.6%) and fifth decade (43.2%). 2. The weight loss rate by ashing was more prominent in the buccal surfaces of the upper posterior teeth (62.0%) than in the lingual surface of the lower anterior teeth (59.7%). 3. The difference in contents of the inorganic constituents by sex was not remarkable. (male, Ca:373.0 P:333.9, female, Ca: 380.2, P: 339.6 ㎍/mg dry weight) 4. In the dry calulus, contents of the inorganic constituents were as follows: Ca:325.8 P:269.10 Mg:1.21 Na:8.44 K:1.32, Zn:0.67 ㎍/mg. 5. The Ca/P ratio was the lowest in the upper anterior region (1.11) and the highest in the lower posterior region (1.29) and the average was 1.20.

  • PDF

The Assessment of Hand for Enzyme Hydrolyzed Denim fabrics(Part II) -subjective evaluation of cotton fabric- (셀룰라아제 처리된 데님직물의 태에 관한 연구(제2보) -면직물의 주관적인 태 평가-)

  • 김경애;이미식;김정희
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.25 no.1
    • /
    • pp.115-123
    • /
    • 2001
  • This paper discussed the assessment of hand of cotton fabrics by enzymatic hydrolysis. The subjective hand and preference of denim fabrics finished by enzymatic hydrolysis were evaluated using the scale developed. The factors affecting consumers taste for denim fabrics were analyzed by the statistical technique. The effects of enzymatic hydrolysis on the properties of cotton fabrics were also evaluated by subjective hand measurements. The results are as follow; As the weight loss increased, evaluators thought that fabrics become finer, smoother, softer, warmer and more refined, and the sense of durability is sleeker and weaker, and the sense of weight is more flexible, flossier, lighter, softer, thinner. They didnt catch the change of moisture related properties according to the rate of weight loss. They also thought fabrics became more elastic, and less wrinklier as the weight loss increased. As the weight loss increased, the fabric was more preferred. The limited weight loss which changes the preference from \"dislike\" to \"like\" was 12.87%. The most preferred fabric was that with 12.87% of weight loss. It is supposed that the preference of fabric was related to the terms such as \"sum-se-ha-da\"(섬세하다), \"mai-ku-rup-da\"(매끄럽다), \"yoo-yon-ha-da\"(유연하다), \"too-bak-ji-an-da\"(투박하지 않다), \"chom-chom-ha-da\"(촘촘하다), \"gil-ki-da\"(질기다), \"kun-juk-goe-ri-ji-an-da\"(끈적거리지 않다), \"ku-kim-i-ka-ji-an-nun-da\"(구김이 가지 않는다).

  • PDF

Determinig the Optimum Defective Rate and the Weight Allowance (최적불량률(最適不良率)과 계량여유량(計量餘裕量)의 결정(決定)에 관한 연구(硏究))

  • Yun, Deok-Gyun;Lee, Nam-Sik
    • Journal of Korean Society for Quality Management
    • /
    • v.9 no.2
    • /
    • pp.10-14
    • /
    • 1981
  • Products are assumed to be spoiled and not recoverable when the raw material below the prescribed weight level is charged in the mold. The raw material is autoscaled and their weight is normally distributed with a given variance. This paper describes an appropriate stochastic model of determining the optimum weight allowance and the associated defective rate for auto scale system. The optimum weight allowance and the defective rate which minimizes the total loss of defective and the excess weight allowance is obtained. A numerical example for the existing rubber company is also presented and evaluated.

  • PDF

A Study of Dewatering Phenomena of Potato Slice Cytorrhysed by High Molecules (고분자 용액의 세포 압착 현상에 의한 감자 절편의 탈수 현상에 관한 연구)

  • Choi, Dong-Won;Shin, Hae-Hun;Kim, Jong-Geu
    • The Korean Journal of Food And Nutrition
    • /
    • v.19 no.4
    • /
    • pp.358-365
    • /
    • 2006
  • To study simultaneous water and solute transport kinetics during soaking in concentrated solution, the influence of the concentration and molecular weight of the solute(polyethylene glycol(PEG) and NaCl) in the soaking solution and the temperature on the water loss and solute gain rates were observed by using a model vegetable tissue(potato). When potato slices$(4cm{\times}4cm{\times}0.1cm)$ soaked in 60% PEG solutions, the water loss rate of the early phase decreased with increasing of the molecular weight of PEG from 200 to 6,000, while the final water loss increased with increasing the molecular weight of PEG and it reached to 80%. The cell wall of potato tissue was permeable to NaCl and PEGs of which average molecular weight is smaller than 400 but it was not permeable to PEG 600 and larger molecules. PEG which has average molecular weight below 600 induced plasmolysis and those above 600 induced cytorrhysis. The water loss rate of potato sample soaked in smaller molecular weight PEG solution was faster than those soaked in higher molecular weight PEG solution before cytorrhysis happened. The water loss rate was reversed after cytorrhysis happened. The volume change of potato within the first 60 minutes was larger in low molecular PEG solution but the final ratio of decreasing volume was larger in high molecular PEG solutions. In PEG 200 solution, the potato tissue was slightly shrinked without shape change. However, in PEG 4,000 solution, volume of potato was reduced significantly and potato tissue was twisted.

비만(肥滿) CLINIC 내원환자(來院患者) 453 CASES에 대(對)한 임상적(臨床的) 고찰(考察)

  • An, Gyeong-Sun;Seong, Nak-Gi
    • Journal of Haehwa Medicine
    • /
    • v.2 no.2
    • /
    • pp.219-246
    • /
    • 1993
  • In 1991, Obesity rate of South Korea has reached to 18.7%. Because of economical development, the pattern of diet is exchanged from carbohydrate to rich protein and fat. The more problem is not only obesity of adult but also one of little child. Obesity is induced to diabetes mellitus, hypertension, artherosclerosis, hyperlipoidemia. heart and C.V.A disease, etc. In Woman, special important ploblem is the complex of beauty about Woman's figure. In Oriental Medicine, the factor of obesity is mainly regarded as dampness. And there are many treatments and methods to body weight loss, but obesity patients dislike to use them because of their side effects and inconvenience, intolerance. Now ear acupuncture is applied on so many disease because of its easy handly, non-side effect and high efficiency in clinics. Here obesity acupuncture is used to ear and whole body acupuncture. Because they react eachother for lack point. Therefore, in order to investigate the effect of obesity acupuncture and develop non-drug, non-starvation etc, we analyzed 453 the cases of body weight loss patients treated with ear and whole body acupuncture in Oriental Medicine Hospital of Jeon-Ju Woo-Sug University from April.1.1992. to March.17. 1993. The results were summarized as follows. 1. Distribution of sex ; male (4.4%), Female(95.6%) 2. Distribution of age in descending order ; 30s, 20s, 40s, 10s, 50s, below 10s, abowe 60s. The 20s-30s are group made up 60.7% of the group. 3. Distribution of occupation in descending order; housewife, student, service, salaried, merchant, teacher, farmer, inoccupation. 4. Distribution of human coporal constitution in descending order : Tae-Eum-In, So-Eum-In, So-Yang-In. 5. Distribution of body height and weight, 155-164cm ; 71.1%, 60-70kg, 74.6% are majority. 6. Distribution of weight variation, 2-6kg(71.0%) is majority, also 13-14kg(0.4%). 7. Distribution of duration in descending order ; 1-3 years, 3-6 years, 1-12months, above 10 years but in success, 1-12 months, 1-3 years, 3-6 years, above 10 years. Therefore, we know that the shorter duration of obesity is, the more loss of body weight. 8. Past experiences to body weight loss; Yes(69.5%), No(30.5%). The success rate accordant with the past temporary experiences shows that the cases without experience is higher than the ones with experience. 9. In distribution of times(treatments), 10 times is top. The rate of body weight loss is the highest in 14 times. Therefore, I think that one would need at least 10 times. in order lose body weight 10. Distribution of body weight variation in treatments times is at 2 times(3-4kg loss), and surprisingly is 14kg loss at above 15 times. 11. Distribution of symptoms improvement, in descending order ; heavy sense in body, dec. of appetite, inc.of exercise, lumbago, edema, knee pain, inc.of urine, inc. of fullness sense, thirsty, disease of gynecology, white tung, chest burning, heart burning, dec.of tobacco, drink taste. motion sickness, allergy, water eczema, arthma, belching. 12. Distribution of snack; Yes(87.4%), No(78.6%) 13. Distribution of exercise; Yes(21.4%), No(78.6%) 14. Distribution of sleeping times, above 7 hours(79.0%) 15. Distribution of the reason to body loss, the complex of beauty(68.7%) is top. 16. Distribution of side effect in obesity acupuncture, constipation (17.4%) is top. 17. Distribution of method in body weight loss ; dietary treatment (31.1%), sauna(26.7%), exercise(19.7%), the center of body weight loss (15.0%) herb-med and starvation treatments (5.1%), hand-finger acupuncture (hand-foot acupuncture) is 1.6%, diet pill(0.3%), etc(0.6%).

  • PDF

Effect of Impact Angle on the Etching of Glass by Powder Blasting (Powder Blasting 을 이용한 유리의 표면부식시 분사각도의 영향)

  • 김광현;박경호;박동삼
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2001.10a
    • /
    • pp.349-354
    • /
    • 2001
  • In this study, we investigated the effect of the impacting ang1e of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozz1e up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA#600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2MPa

  • PDF