• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.13-20
• /
• 2011

In this paper, we proposed a system to raise gas safety management by using the wireless communication module and intelligent gas safety appliances. Our designed systems configure a micom-gas meter, an automatic extinguisher, sensors, and a wallpad. A micom-gas-meter monitors gas flow, gas pressure, and earthquake. An automatic fire extinguisher checks gas(combustible) leaks and temperature of $100^{\circ}C$ and $130^{\circ}C$. Sensors measure smoke and CO gas. In our novel system, a micom-gas meter cut off inner valve with warnings, an automatic fire extinguisher cut off middle valve and spray extinguishing materials, and sensors generate signals for smoke and CO when occurring gas risk. Gas safety appliances and sensors takes safety measures, and transmit those signal to a wallpad. The wallpad again transmit signal like events to a control server. Users can connect web pages for gas safety through B-ISDN and control and manage them. We hereby devised scenarios for gas safety and risk management, and demonstrated their effectiveness through experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.176-182
• /
• 2012

Recently, a new theoretical and methodological approach for computational science is becoming more and more popular for analyzing and solving scientific problems in various scientific disciplines and applied research. Computational science is a field of study concerned with constructing mathematical models and quantitative analysis techniques and using large computing resources to solve the problems which are difficult to approach in a physical experimentally. In this paper, we present R&D of EDISON open integration platform that allows anyone like professors, researchers, industrial workers, students etc to upload their advanced research result such as simulation SW to use and share based on the cyber infrastructure of supercomputer and network. EDISON platform, which consists of 3 tiers (EDISON application framework, EDISON middleware, and EDISON infra resources) provides Web portal for education and research in 5 areas (CFD, Chemistry, Physics, Structural Dynamics, Computational Design) and user service.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.117-124
• /
• 2012

The importance of the digital architecture is increasing more ever. Currently, CAD and 3D programs are used as design fields, but the BIM (building information modeling) is gradually interested. BIM is mandatory on the project more than 50 billion won ordered by the government since 2012, it will be expanded to a total of government orders by 2016. University needs to evaluate teaching methods and computer-aided design environments such as CAD and BIM. In this paper, we surveyed computer-aided design environments and teaching methods for 73 students at the J University of Department of architectural engineering. Main results are as follows: 1. Hardlock is uncomfortable but necessary program for the computer management. 2. The desk placement considering the behavior of the design students results in higher satisfaction. 3. Because a CAD subject was a difficult course content and progress is fast, students thought it is difficult to follow. Especially, first-year students answered it is difficult to learn program and understand the structure of the building at the same time. 4. First-year students want to learn CAD more. Second-, third-, fourth-year students want to learn Photoshop more. Supplement for these classes is required. 5. Students answered that a teaching method of a CAD subject would be good to their own practice after the professor demonstrates for students. The senior's assistance is also a high effective way in the class. 6. During class, students' activities such surfing the web and Kakao Talk on a smartphone disrupt the class, there is a need to regulate by a rule such as disconnect computers from a network and against using smartphone. Although the Internet with the popularization of smartphones confers a benefit on modern life, it causes damage to us. This is a hard part for a salaried workers as well as students studying equally. The self management is required and a professor needs to control and restraint in a university classroom. The professor's continuing interest to students can increase the effectiveness of learning.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.466-469
• /
• 2011

Recently, a new theoretical and methodological approach for computational science is becoming more and more popular for analyzing and solving scientific problems in various scientific disciplines such as Computational fluid dynamics, Chemistry, Physics, Structural Dynamics, Computational Design and applied research. Computational science is a field of study concerned with constructing mathematical models and quantitative analysis techniques and using large computing resources to solve the problems which are difficult to approach in a physical experimentally. In this paper, we present R&D of EDISON open integration platform that allows anyone like professors, researchers, industrial workers, students etc to upload their advanced research result such as simulation SW to use and share based on the cyber infrastructure of supercomputer and network. EDISON platform, which consists of 3 tiers (EDISON application framework, EDISON middleware, and EDISON infra resources) provides Web portal for education and research in 5 areas (CFD, Chemistry, Physics, Structural Dynamics, Computational Design) and user service.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.378-396
• /
• 2022

Several reconstructive methods have been reported to restore the continuity of the aerodigestive tract following resection of pharyngeal and hypopharyngeal cancers. However, high complication rates have been reported after voice prosthesis insertion. In this setting, the ileocolon free flap (ICFF) offers a tubularized flap for reconstruction of the hypopharynx while providing a natural phonation tube. Herein, we systematically reviewed the current evidence on the use of the ICFF for reconstruction of the aerodigestive tract. A systematic literature search was conducted across PubMed MEDLINE, Web of Science, ScienceDirect, Scopus, and Ovid MEDLINE(R). Data on the technical considerations and surgical and functional outcomes were extracted. Twenty-one studies were included. The mean age and follow-up were 54.65 years and 24.72 months, respectively. An isoperistaltic or antiperistaltic standard ICFF, patch flap, or chimeric seromuscular-ICFF can be used depending on the patients' needs. The seromuscular chimeric flap is useful to augment the closure of the distal anastomotic site. The maximum phonation time, frequency, and sound pressure level (dB) were higher with ileal segments of 7 to 15 cm. The incidence of postoperative leakage ranged from 0 to 13.3%, and the majority was occurring at the coloesophageal junction. The revision rate of the microanastomosis ranged from 0 to 16.6%. The ICFF provides a reliable and versatile alternative for reconstruction of middle-size defects of the aerodigestive tract. Its three-dimensional configuration and functional anatomy encourage early speech and deglutition without a prosthetic valve and minimal donor-site morbidity.

• The Journal of Society for e-Business Studies
• /
• v.25 no.4
• /
• pp.143-154
• /
• 2020

With the increasing trend of making manufacturing system intelligent and autonomous, the introduction of robot-assist automation, like machine tending system for automated operation of CNC machine tools, is being actively carried out at many industrial sites. Most important part of this intelligent system to install machine tending system, is interface programming between the CNC machine tools and the industrial robot. Despite this importance, however, the machine tending system has many setup problems. it is necessary for difficult re-program of both controllers whenever a new CNC machine tool or robot is introduced. And, the helps of external engineers is required even though trivial changes due to the complex structure of the machine tending system. Authors of this paper introduces the integrated system of the interface between heterogeneous CNC machine tools and industrial robots. In addition, the digital twin implemented inside the machine tool controller enable shop-floor operators to change the interface programming easily. To implement this system, an integrated development environment for 1) an intelligent HMI platform that provide standardized interfaces to heterogeneous CNC machine tools and 2) a robot platform developing application software of various robots, was established. For easy un-tact environment, this paper explain the development of 3) a game-engine based web program of controlling and monitoring machine tending system remotely.

• Korean Journal of Environmental Biology
• /
• v.18 no.4
• /
• pp.367-376
• /
• 2000

Euglenoids occurring in freshwaters are indicator organisms to be used for assessing water quality and applying to environmental education. One hundred sixty eight taxa of euglenoids belonging to three orders, four families and nine genera occur in various waters, especially in eutrophicated and polluted places in Korea. Members of Euglena and Strombomonas are abundant in urban drainages and old ponds, and those of Trachelomonas, Phacus, and Lepocinclis often occur in stagnant waters such as natural wetlands and old swamps. Population size of some euglenoids is significantly correlated to nitrogenous nutrients. Euglena caudata, E. doses, E. ehrenbergii, E. haemichromata, E. geniculata, E. viridis, Lepocinclis ovum, Strombomonas urceolata, Phacus trypanon, Trachelomonas hispida, and T volvocina cells in Korea bloomed in winter and spring, when other phytoplanktonic algae greatly decrease. Blooming of euglenoids indicates tolerance to pollutants and positive selection as a result of competition with other phytoplankton species. We developed a web site on green euglenoids (Yahoo. com: Science/ Biology/ Botany/ Phycology/ Biology of Green Euglenoids), which may be use d for cyber education of water environment. We also presented a method for assessing water quality using diversity and population size of euglenoids, which is considered to be suitable for environmental education of polluted waters.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.283-287
• /
• 2008

The imogolite synthesis wore performed by using tetraethoxysilane (TEOS) and aluminium-sec-butoxide (ASB) at < $100^{\circ}C$. A mixure of TEOS and ASB in a molar ratio of 1:2 was prepared under vigorous stirring and the experiments were performed under the hydrothemal refluxing condition. When the concentration of TEOS and ASB in solution was 0.5 M, a well-crystallized imogolite was synthesized, and the reflections wore shown at d = 22.4, $9.5\;\AA$ etc., after XRD analysis. DTA analysis shows 2 exothemal peaks at 68 and $249^{\circ}C$, suggesting the dehydration and the dehyroxylation reaction, respectively. The result of TG indicates 41% weight loss. And the weak and unsymmetrical peaks by the Si-O-Al stretching vibrations at 953 and $993cm^{-1}$ and by O-Si-O bending vibration at $562cm^{-1}$ were observed after IR analysis. The synthetic imogolite was fibrous and shows a spiders web like network structure.