• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.856-863
• /
• 2014

In the terrestrial optical wireless communication(OWC), the performance is affected by atmospheric turbulence and particles in the air. The received signal power loss mainly is caused by turbulence and scattering. To minimize the adverse atmospheric effects, the OWC used optical signal modulation, such as OOK, PPM and DPIM. In this paper, the packet error rate(PER) was analyzed above three modulation methods to ground optical link in atmospheric turbulence, scattering and link distance. The OWC system used three wavelengths which are 850nm, 1310nm and 1550nm. I assumed the atmospheric turbulence intensity is weak, so the refractive index is $Cn2{\approx}10-14m-2/3$ and the visibility is 2km. The numerical results shown that the L-DPIM scheme and the wavelength 1550nm are better than other modulation methods and wavelengths.

• Journal of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.247-255
• /
• 1973

The self supported film specimen of Wyoming montmorillonite as a layer silicate saturated by cations,$Li^{+},\;Na^{+},\;K^{+},\;Ca^{2+},\;Ni^{2+},\;Al^{3+}$and$F^{3+}$ were allowed to contact acetone, methyl-ethyl ketone and diethyl ketone within the heatable gas cell. The i.r. spectra between $4000{\sim}1200cm^{-1}$ at different pressures of adsorbates indicated bond formation through carbonyl oxygen. Two types of carbonyl bond shift with maxima at $1713cm^{-1}$ and $1690cm^{-1}$ are attributed as coordinate bond formation of carbonyl with either surface hydroxyl or cationic hydroxyl group. The intensity of the vOH was analyzed and resonance form of cationic hydroxyl was proposed as an adsorption site. The tendency to form coordinate bond was in good agreement with calculated formal charge of carbonyl oxygen in an increasing order, acetone < methyl-ethyl ketone < diethyl ketone. As an additional mechanism of adsorption, weak hydrogen bonding of methyl hydrogen with surface oxygen was observed.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.173-180
• /
• 2006

The seismic responses of a building are affected by the base soil conditions. In this study, linear time-history seismic analysis and nonlinear pushover static seismic analysis were performed to estimate the base shear forces of 3-, 5-, and 7-story steel buildings, considering the rigid and soft soil conditions. Foundation soil stiffness, based on the equivalent static stiffness formula, is used for the damper, one of the Link elements in SAP 2000. The base shear forces of the steel buildings, estimated through time-history analysis using the general-purpose structural-analysis program of SAP 2000, were compared with those calculated using the domestic seismic design code, the UBC-97 design response spectrum. and pushover static nonlinear analysis. The steel buildings designed for gravity and wind loads showed elastic responses with a moderate earthquake of 0.11 g, while the elastic soft-soil layer increased the displacement and the base shear force of the buildings due to soil-structure interaction and soil amplification. Therefore, considering the characteristics of the soft-soil layer, it is more reasonable to perform an elastic seismic analysis of a building's structure during weak or moderate earthquakes.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.167-177
• /
• 1997

In thtx design of ductile moment -1csist1ng frnmcls (DMRFs) f'ollow~ng the. stlong columnweakbeam design philosophy, it is desirable that the joint and column remain essentiallyelastic in order to insure proper energy dissipation and lateral stability of the structure.Thv joint has been identifid as the "weak link: in DMRFs because any stiffness orstrength deterioration in this region can lead to substantial drifts and the possibility ofcollapse due to t'-delta effects. h3oreove1.. the tngintw is faced with the difficult task ofdetailing an element whose size is determined by theframing members, but \vhich mustresist a set of loads very different from those used in the design of the beams and columns.Four 3 -scale beam-column-slab joint assemblies were designed according to existing cod\ulcornerrequirements of' ACI 318-89. representing perimeter joints of DMRFs with reinforced highstrength concrete. The influence on aseismic behavior of beam-column joints due tomonolithic slab, has been investigated.lab, has been investigated.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.641-649
• /
• 2017

The discovery of the Interfacial Transition Zone (ITZ) by Farran in 1956 initiated a new era in the study of the behaviour of concrete. Acknowledged as the weak link, this ITZ was studied extensively, numerically as well as experimentally. While the complementary experimental tests illustrated the visual behaviour of this specimen under increasing monotonic compression loading, a perfect bond within the ITZ has also been studied by using finite element analysis for comparison purposes. Finite element analysis was used to evaluate the degree of correctness and precision of the proposed ITZ model. This paper discusses the use of the cutoff bar in finite element modeling, representing the ITZ of a single aggregate (inclusion) in a mortar matrix. Experiments were conducted to investigate the influence of the ITZ model on the single inclusion specimen's strength. The model was tested for some inclusions that varied in dimension and shape. The effect of inclusion shape on the stress concentrations of the specimens was examined. The aim of this research work is to propose a simple yet accurate ITZ model to be used in the commercially available finite element software packages.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.187-192
• /
• 2011

The purpose of this study is to evaluate the supply plan of public rental housing under the Lee Myung-bak government. According to the supply plan, the government will supply public rental housings by 80,000 unit every year from 2009 to 2018, and achieve 12% as stock ratio in 2018. To evaluate the supply plan, this study analyzed housing needs of tenants in private rental housing by using the raw data of Korea Welfare Panel Survey(2008). The results are as follows: (1) It is difficult for the supply plan to meet the housing needs of tenants in private rental housing. (2) The link between supply plan and stock ratio target is weak. (3) To meet the housing needs, it is necessary to supply public rental housings by 107,000 unit every year for 10 years, and, in this case, the stock ratio will be 10% in 2018. In conclusion, this study proposed that the supply plan of public rental housing should be redesigned.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2429-2435
• /
• 2012

Methyl isocyanate may have a role in cancer etiology, although the link is unclear. There is evidence in the literature that it can induce cancer in animals but the carcinogenic potency is weak. Pheochromocytoma of adrenal medulla and acinar cell tumors of pancreas have been observed in methyl isocyanate exposed animals. Conversely, emerging data from population-based epidemiological studies are contradictory since there is no evidence of such cancers in methyl isocyanate exposed humans. Recently, we reported a high prevalence of breast and lung cancers in such a population in Bhopal. In vitro findings appearing in the latest scientific literature suggest that genomic instability is caused by methyl isocyanate analogs in lung, colon, kidney, ovary epithelial cells, and that hepatocytes may undergo oncogenic transformation, have obvious implications. The conflicting information prompted us to present this update over the last three decades on methyl isocyanate-induced cancers after an extensive literature search using PubMed. While the pertinent literature remains limited, with a scarcity of strong laboratory analyses and field-epidemiological investigations, our succinct review of animal and human epidemiological data including in vitro evidences, should hopefully provide more insight to researchers, toxicologists, and public health professionals concerned with validation of the carcinogenicity of methyl isocyanate in humans.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.110-113
• /
• 2016

In this paper of ka band satellite communication using geostationary satellite is very weak to rainfall. So the rain attenuation reflect the values calculated using the satellite communication links vulnerable when designing a more reliable rainfall area distribution of rain attenuation and accurate predictive models must analyze the link budget. In this paper, by utilizing domestic distribution analysis in the recent local rainfall Crane and regional rainfall in the model and compared with the country of the regional distribution of rainfall in your area to fit the rain attenuation in Ka band frequency characteristics Crane rain attenuation prediction models were analyzed to between geostationary satellites and ground station position, distance and year time percentage(%).

• Journal of Distribution Science
• /
• v.11 no.3
• /
• pp.49-62
• /
• 2013

Purpose - The purpose of this paper is has been to identify the information disclosed by Internet website companies listed in Tehran Stock Exchange. Research design, data, methodology - The list was prepared includes 84 attributes for financial information in two parts and 36 non-financial information attributes and with 48 attributes of listed companies in Tehran Stock Exchange. Results - The results show that Internet reporting in Iran has improved compared to previous research. However, the level of financial disclosure and accounting firms with the most important research in this area is weak and these companies are more willing to disclose non-financial information to disclose their financial information. In Iran has been little research on Internet financial reporting. Conclusions - Although this study has been to the best possible information is available on the website of each company covered and fully evaluated but May have some unwanted data hidden from view has been fulfilled and is missing. The attribute relating to support of other languages, in this study, only the presence or absence of links (other languages) and information disclosed is limited to languages have not been studied other than Persian.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.115-119
• /
• 1999

Ba$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were deposited by pulsed laser deposition using differently prepared targets: One was a conventionally solid-state sintered (SSS) target and the other was a modified melt-textured grown (MTC) target. Compared with SSS targets, MTG targets showed a well-connected microstructure consisting of much larger grains and the surface was Bess roughened with the cumulative laser incidence. YBCO films deposited from MTC targets showed a denser and smoother surface of the basal film than the case of SSS targets. The investigations of ${\alpha}$-axis outgrowths in the films indicated that the deposition using MTG targets would result in a more homogeneous and stable film growth as compared to the SSS targets. Also, TEM analysis revealed that the film deposited from MTG targets had a less granular microstructure that would reduce weak-link effects in the film.