Browse > Article
http://dx.doi.org/10.12989/cac.2017.19.6.641

Modeling of the ITZ zone in concrete: Experiment and numerical simulation  

Setiawan, Yanuar (Department of Civil Engineering, Faculty of Civil Engineering and Planning, Islamic University of Indonesia)
Gan, Buntara S. (Department of Architecture, College of Engineering, Nihon University)
Han, Ay Lie (Department of Civil Engineering, Faculty of Engineering, Diponegoro University)
Publication Information
Computers and Concrete / v.19, no.6, 2017 , pp. 641-649 More about this Journal
Abstract
The discovery of the Interfacial Transition Zone (ITZ) by Farran in 1956 initiated a new era in the study of the behaviour of concrete. Acknowledged as the weak link, this ITZ was studied extensively, numerically as well as experimentally. While the complementary experimental tests illustrated the visual behaviour of this specimen under increasing monotonic compression loading, a perfect bond within the ITZ has also been studied by using finite element analysis for comparison purposes. Finite element analysis was used to evaluate the degree of correctness and precision of the proposed ITZ model. This paper discusses the use of the cutoff bar in finite element modeling, representing the ITZ of a single aggregate (inclusion) in a mortar matrix. Experiments were conducted to investigate the influence of the ITZ model on the single inclusion specimen's strength. The model was tested for some inclusions that varied in dimension and shape. The effect of inclusion shape on the stress concentrations of the specimens was examined. The aim of this research work is to propose a simple yet accurate ITZ model to be used in the commercially available finite element software packages.
Keywords
FEM; cutoff bar; ITZ; compressive strength; full bond;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Akcaoglu, T., Tokyay, M. and Celik, T. (2004), "Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression", Cement Concrete Compos., 26(6), 633-638.   DOI
2 Bentz, D. and Garboczi, E. (1999), "Computer modelling of interfacial transition zone: Microstructure and properties", Eng. Transp. Propert. Interf. Transit. Zone Cement. Compos., 5, 349-385.
3 Bourdette, B., Ringot, E. and Olivier, J.P. (1995), "Modelling of the transition zone porosity", Cement Concrete Res., 25(4), 741-751.   DOI
4 Bremner, T.W. and Holm, T.A. (1986), "Elastic compatibility and the behavior of concrete", ACI J. Proc., 83(2), 244-250.
5 Elsharief, A., Cohen, M. and Olek, J. (2003), "Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone", Cement Concrete Res., 33(11), 1837-1849.   DOI
6 Escadeillas, G. and Maso, J. (1991), "Approach of the initial state in cement paste, mortar and concrete", Adv. Cement Mater., 169-184.
7 Farran, J. (1956), "Contribution mineralogique a l'etude de l'adherence entre les constituants hydrates des ciments et les materiaux enrobes", Rev. Mater. Constr., 490-491, 155-172.
8 Garboczi, E. (1997), "Stress, displacement, and expansive cracking around a single spherical aggregate under different expansive conditions", Cement Concrete Res., 27(4), 495-500.   DOI
9 Garboczi, E. and Berryman, J. (2001), "New effective medium theory for the linear elastic moduli of a material containing composite inclusions", Mech. Mater., 33(8), 455-470.   DOI
10 Garboczi, E., Bentz, D., Shane, J., Mason, T. and Jennings, H. (2000), "Effect of the interfacial transition zone on the conductivity of Portland cement mortars", J. Am. Ceram. Soc., 83(5), 1137-1144.   DOI
11 Han, A.L, Gan, B.S., Yuniarto, R., Yesica, A. and Editia, R.N. (2015), "Inclusion-to-specimen volume ratio influence on the strength and stiffness behaviors of concrete: An experimental study", Appl. Mech. Mater., 845, 113-118.
12 Han, A.L. (2013), "Modeling the stiffness properties of the aggregate-to-mortar interfacial transition zone in concrete", Ph.D. Dissertation, Diponegoro University, Semarang, Indonesia.
13 Han, A.L. and Nuroji. (2010), "The normal and shear modulus properties of the interfacial transition zone in concrete: newly developed testing procedures", Proceedings of the 35th Coral Anniversary Conference on Our World in Concrete and Structures, Challenge of the Low Carbon Age, Singapore, August.
14 Han, A.L. and Sabdono, P. (2011), "Experimental study of the load-displacement response of the interfacial transition zone in concrete", Proceedings of the 3rd International Conference on European Asian Civil Engineering Forum (EACEF-2011), Designing and Constructing Sustainability, Yogyakarta, Indonesia, September.
15 Han, A.L., Gan, B.S. and Setiawan, Y. (2014a), "The influence of single inclusions to the crack initiation, propagation and compressive strength of mortar", Proc. Eng., 95, 376-385.   DOI
16 Han, A.L., Gan, B.S. and Setiawan, Y. (2015), "The aggregate multi-inclusion interaction and interface influence on the compression behavior of concrete", Implement. Innovat. Ideas Struct. Eng. Proj. Manage., 695-700.
17 Han, A.L., Gan, B.S., Suryanto, B. and Priastiwi, Y.A. (2017), "Influence of the stiffness modulus and volume fraction of inclusions on compressive strength of concrete", Proc. Eng., 171, 760-767.   DOI
18 Hashin, Z. and Monteiro, P. (2002), "An inverse method to determine the elastic properties of the interphase between the aggregate and the cement paste", Cement Concrete Res., 32(8), 1291-1300.   DOI
19 Han, A.L., Nurhuda, I. and Setiawan, Y. (2014b), "The effect of aggregate shape and configuration to the concrete behavior", Smart Sci., 2(2), 85-90.   DOI
20 Han, A.L., Sabdono, P. and Purnomo, J. (2012), "Finite element modeling of the transition zone between aggregate and mortar in concrete", Proceedings of the 1st International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM), Yogyakarta, Indonesia, September.
21 Jagota, A. and Bennison, S.J. (1994), "Spring-network and finite element models for elasticity and fracture, in: Non-linearity and breakdown in soft condensed matters", Proceedings of the Workshop in Calcutta, Delaware, U.S.A., July.
22 Ke, Y., Ortola, A.L., Beaucour, S. and Dumontet, H. (2010), "Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ)", Cement Concrete Res., 40(11), 1590-1600.   DOI
23 Lee, K.M. and Park, J.H. (2008), "A numerical model for elastic modulus of concrete considering interfacial transition zone", Cement Concrete Res., 38(3), 396-402.   DOI
24 Maher, A. and Darwin, D. (1977), "Microscopic finite element model of concrete", Proceedings of the 1st International Conference on Mathematical Modeling III, St. Louis, U.SA., August-September.
25 Nadeau, J. (2002), "Water-cement ratio gradients in mortar and corresponding effective elastic properties", Cement Concrete Res., 32(3), 481-490.   DOI
26 Nilson, A.H. (1968), "Nonlinear analysis of reinforced concrete by the finite element method", ACI J. Proc., 65(9), 757-766.
27 Nadeau, J. (2003), "A multiscale model for effective moduli of concrete incorporating ITZ water-cement ratio gradients, aggregate size distributions, and entrapped voids", Cement Concrete Res., 33(1), 103-113.   DOI
28 Neubauer, C., Jennings, H. and Garboczi, E. (1996), "A threephase model of the elastic and shrinkage properties of mortar", Adv. Cement-Bas. Mater., 4(1), 6-20.   DOI
29 Ngo, D. and Scordelis, A.C. (1967), "Finite element analysis of reinforced concrete beams", ACI J. Proc., 64(3), 152-163.
30 Prokopski, G. and Halbiniak, J. (2000), "Interfacial transition zone in cementitious materials", Cement Concrete Res., 30(4), 579-583.   DOI
31 RILEM Technical Committee 148-SSC (2000), "Strain softening of concrete-test method for compressive softening", Mater. Struct./Materiaux et Constr., 33, 347-351.   DOI
32 Scordelis, A.C., Ngo, D. and Franklin, H.A. (1974), "Finite element study of reinforced concrete beams with diagonal tension cracks", ACI Spec. Publ., 42, 79-102.
33 Sorelli, L., Constantinides, G., Ulm, F.J. and Toutlemonde, F. (2008), "The nano-mechanical signature of ultra high performance concrete by statistical nanoindentation techniques", Cement Concrete Res., 38(12), 1447-1456.   DOI
34 STRAND7, Rel 2.4 (2015), Reference Manual, Strand7 Pty Limited.
35 Suarjana, M., Besari, M.S. and Abipramono R. (1998), "Twodimensional concrete models using metal aggregates", Proceedings of the RILEM 2nd International Conference on Interfacial Transition Zone in Cementitious Composites, 31, 67-74.
36 Zheng, J., Zhou, Z. and Jin, X. (2012), "An n-layered spherical inclusion model for predicting the elastic moduli of concrete with inhomogeneous ITZ", Cement Concrete Compos., 34(5), 716-723.   DOI
37 Tasong, W.A., Lynsdale, C.J. and Cripps, J.C. (1999), "Aggregate-cement paste interface. Part I. Influence of aggregate geochemistry", Cement Concrete Res., 29(7), 1019-1025.   DOI
38 Vile, G.W.D. (1968), "The strength of concrete under short term static biaxial stress", Proceedings of the International Conference on Structure of Concrete, 275-287.
39 Wang, X.H., Jacobsen, S., He, J.Y., Zhang, Z.L., Lee, S.F. and Lein, H.L. (2009), "Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar", Cement Concrete Res., 38(8), 701-715.