• 제목/요약/키워드: wavelength converter

검색결과 62건 처리시간 0.02초

Re-timing 기능을 생략한 광/전/광 파장변환기의 cascadability 분석 및 측정 (Analysis and measurement of the cascadability for 2R O/E/O wavelength converter)

  • 장윤선;김광준
    • 한국광학회지
    • /
    • 제14권3호
    • /
    • pp.215-218
    • /
    • 2003
  • 2R 광/전/광 파장변환기는 이미 검증된 기술을 사용하여 간단히 구현할 수 있으며 데이터 전송율을 제한하지 않는다는 장점이 있다. 그러나, 이 방식은 각 파장변환기를 통과하면서 타이밍 지터 성분이 계속 누적되어 cascadability가 제한된다 본 논문에서는 통상적인 정현파 신호 모델 대신 보다 현실적인 비선형 신호 모델을 제안하여 시스템 성능에 미치는 타이밍 지터의 영향 및 2R 광/전/광 파장변환기의 cascadability를 이론적으로 분석하였으며, 40-km re-circulation loop 실험 장치에서 10 Gb/s 신호에 대한 cascadability를 측정하여 계산 결과와 비교하였다.

파장분할다중화 광통신망에서 산재-부분-제한영역 파장 변환기의 효율적인 배치 알고리듬 (An Efficient Converter Placement in Wavelength-Routed WDM Networks with Sparse-Partial-Limited Wavelength Conversion)

  • 정한유;서승우;최윤호
    • 한국통신학회논문지
    • /
    • 제35권11B호
    • /
    • pp.1596-1606
    • /
    • 2010
  • 본 논문에서는 산재-부분-제한영역 파장 변환 방식의 파장분할다중화 광통신망의 불통 확률을 정확하게 계산할 수 있는 수학적 성능분석 모형을 제안하고, 이를 기반으로 파장 변환기를 효율적으로 배치하는 파장 변환기 배치 알고리듬을 제시한다. 제안하는 성능분석 모형은 파장 변환기의 제한된 파장 변환 영역으로 발생하는 영역 불통(Range Blocking)과 파장 변환기의 개수 제약으로 발생하는 용량 불통(Capacity Blocking)을 이론적으로 도출하는 최초의 성능분석 모형이다. 유럽 광통신망에서 수행한 시뮬레이션 결과를 통해 제안하는 성능분석 모형이 광통신망의 불통확률을 정확히 예측함을 보인다. 또한, 기존에 알려진 산재 파장 변환 방식, 부분 파장 변환 방식, 또는 제한영역 파장 변환 방식들과 비교할 때, 이들을 효율적으로 결합한 산재-부분-제한영역 파장 변환 방식이 최소의 파장 변환 비용으로 주어진 광통신망의 불통 성능을 달성할 수 있음을 보인다.

All-Optical AND Gate Using XPM Wavelength Converter

  • Kim, Jae-Hun;Kang, Byoung-Kwon;Park, Yoon-Ho;Byun, Young-Tae;Lee, Seok;Woo, Deok-Ha;Kim, Sun-Ho
    • Journal of the Optical Society of Korea
    • /
    • 제5권1호
    • /
    • pp.25-28
    • /
    • 2001
  • By using an XPM (Cross Phase Modulation) wavelength converter, an all-optical AND gate, which is one of six fundamental logic gates, has been demonstrated. The wavelengths for probe and pump signals are 1553.8 and 1545 nm, respectively. First, characteristics of the XPM wavelength converter have been studied. When both probe and pump signals are driven by high power, the output power of the XPM wavelength is high. Based on this fact and the experiment, the all-optical AND gate has been porved. Probe and pump signals are transformed to pulse signals by using Mach-Zehnder modulator, which is induced by a pulse generator. Square pulse signals that are similar to the format of NRZ signals have been generated. By coupling two pulse signals into the XPM wavelength converter, AND characteristics in substantiated.

티타늄 확산 주기적 분극반전 채널 광도파로에서 연속적으로 일어나는 합주파수/차주파수 생성을 이용한 가변 파장 변환기 (Tunable All-Optical Wavelength Conversion in a Ti:PPLN Channel Waveguide Using Cascaded Sum and Difference Frequency Generation)

  • Lee Ji Hyeon;Sin Sang Yeong;Lee Yeong Rak;Min Yu Hong;Werner Grundkoetter;Victor Goring;Wolfgang Sohelr
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
    • /
    • pp.156-157
    • /
    • 2003
  • The wavelength converter is considered to be a key element of future dense WDM optical networks. It enables wavelength reuse and resolves contention problem. Moreover, the tunability of the wavelength converter enhance the flexibility of network systems by facilitating reconfigurable dynamic wavelength routing. In order to achieve optically tunable wavelength conversion, we recently proposed and experimentally demonstrated wavelength conversion and tuning based on cascaded sum and difference frequency generation in a Ti:PPLN channel waveguide. (omitted)

  • PDF

다중 파장 환경의 DWDM 망에서 파장 변환 기능에 대한 분석 (A Study on Analysis of Wavelength-Conversion Function in DWDM Network of Multiple Wavelength Environment)

  • 김용성;이재동;우종호
    • 컴퓨터교육학회논문지
    • /
    • 제9권1호
    • /
    • pp.97-106
    • /
    • 2006
  • 차세대 인터넷 백본망에서 DWDM 기술은 기존의 TDM 기반 인터넷이 가진 회선 부족 문제를 해결하기 위한 대안으로 등장하였다. DWDM 망에서는 자원의 효율적인 사용과 각기 다른 사용자 요구사항을 충족하기 위해 연결 설정시 RWA 문제와 더불어 파장 변환 기능에 대한 고려가 필수적이다. 본 논문에서는 제한된 범위의 파장 변환 기능 및 선택된 노드의 파장변환기 사용에 대한 효율적인 방안에 대해 기술하고, 성능 실험을 통해 최적의 파장변환기 사용을 검증한다.

  • PDF

반도체 광증폭기의 상호 이득 변조를 이용한 2.5 Gbps 다채널 가변형 파장변환기 (Development of 2.5 Gbps Multi-Channel Tunable Wavelength Converter Based on Cross Gain Modulation in Semiconductor Optical Amplifier)

  • 손정민;이상선
    • 한국광학회지
    • /
    • 제16권4호
    • /
    • pp.392-396
    • /
    • 2005
  • 본 논문에서는 파장 분할 다중화 방식 광통신에의 적용을 목적으로 하는 다채널 가변형 파장 변환기(Wavelnength Convertor)를 구성하여 이의 성능을 분석하였다. 파장 변환기는 반도체 광증폭기(SOA : Semiconductor Optical Amplifier)의 상호 이득 변조(XGM : Cross Gain Modulation) 특성을 이용한 파장 변환 방식이 이용되었다. 2.5 Gbps 광통신 기반 100 CHz의 채널 간격을 갖는 다채널 신호들에 대한 파장 변환 성능을 측정, 분석하였다. 본 파장 변환기의 상호 이득 변조 성능을 측정한 결과, 소광비(Extinction Ratio)와 비트 오류율(BER : Bit Error Rate) 등의 검증에서 2.5 Gbps 기반의 파장 분할 다중화 방식 광통신에 사용하기에 충분한 성능을 보였으며, 이를 통해 최근 개발된 상호 위상 변조 방식(XPM Cross Phase Modulation)의 다채널 파장 변환기와 비교해 상대적으로 간단한 구조를 가지고 제작 및 변조 효율에 우위를 보이는 파장 변환기로서 대체될 수 있음을 밝힌다.

Loss-Coupled DEB LD집적 Mach-Zehnder 간섭계형 파장 변환기 (All-optical mach-zehnder interferometric wavelength converter monolithically integrated with loss-coupled DFB probe source)

  • 김현수;김종회;심은덕;백용순;김강호;권오기;오광룡
    • 한국광학회지
    • /
    • 제14권4호
    • /
    • pp.454-459
    • /
    • 2003
  • 단일 모드 광원이 집적된 Mach-Zehnder간섭계형 파장 변환기를 제작하여 세계 최초로 10 Gb/s에서 파장 변환 특성을 확인하였다. 제작된 파장 변환기는 수동 도파로 영역에서의 전파 손실을 줄이기 위해 undoped InP층이 수동 도파로 위에 형성된 새로운 BRS 구조를 사용하였다. 단일 모드 광원으로 손실 결합형 분포 궤환형 반도체 레이저(loss-coupled distributed feedback laser; LC-DFB LD)를 사용하여, 파장 변환기에 있는 반도체 광증폭기의 주입전류가 200 mA까지 측모드 억제율이 30 dB 이상의 값을 나타내었다. 제작된 LC-DFB LD 집적 파장 변환기는 10 Gb/s의 동적 파장 변환 특성 측정 결과, 7 dB 정도의 소광비를 갖는 eye 패턴을 얻을 수 있었으며, power penalty는 $10^{-9}$ bit error rate에서 2.8 dB의 값을 나타내었다.

4파 혼합 파장 변환기에서 CW 파워 조절을 통한 입력 신호 영역 확장 (Input Signal Power Range Extension by Optimal Control of CW Power in Four-Wave-Mixing Wavelength Converter)

  • 장원봉;박경현;박효훈
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
    • /
    • pp.158-159
    • /
    • 2003
  • In four-wave-mixing wavelength converter, we investigated the performance through simulation by using VPI tool, changing the input signal power and CW power at 2.SGb/s. Controlling optimal CW power to each input signal power, we extended the input signal power range to 20dB, which guarantees the minimum power penalty.

  • PDF

Chromatic Dispersion Compensation via Mid-span Spectral Inversion with Periodically Poled $LiNbO_3$ Wavelength Converter at Low Pump Power

  • Kim, Min-Su;Ahn, Joon-Tae;Kim, Jong-Bae;Ju, Jung-Jin;Lee, Myung-Hyun
    • ETRI Journal
    • /
    • 제27권3호
    • /
    • pp.312-318
    • /
    • 2005
  • Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

  • PDF

CW-HB를 이용하는 전치증폭기를 가진 SOA-MZI 파장변환기에서 IPDR 개선 (Enhancement of IPDR of SOA-MZI Wavelength Converter with Pre-amplifier Using a CW-HB)

  • 김주엽;한상국
    • 한국통신학회논문지
    • /
    • 제31권1A호
    • /
    • pp.11-15
    • /
    • 2006
  • CW-HB(continuous wave-holding beam)를 이용하여 전치 증폭되는 SOA-MZI(semiconductor optical amplifier-Mach-Zehnder interferometer) 파장변환기가 제안되고 10Gb/s에서 실험적으로 검증되었다. 바이어스 전류만으로 전치증폭기를 제어하던 기존의 방법과 비교할 때, 제안된 CW-HB 제어 방법은 IPDR(input power dynamic range)의 개선 측면에서는 20dB 정도로 유사하나 출력신호의 왜곡을 제거하여 Q 파라미터를 $2{\sim}3$ 정도 향상시키고 낮은 NF(noise figure)를 달성하여 $2{\sim}5dB$ 정도 더 높은 소광 비를 얻을 수 있어서 매우 우수하다.