• 제목/요약/키워드: wavelength

검색결과 6,199건 처리시간 0.031초

Design and Performance Analysis of a Multi Wavelength Terahertz Modulator Based on Triple-Lattice Photonic Crystals

  • Ji, Ke;Chen, Heming;Zhou, Wen
    • Journal of the Optical Society of Korea
    • /
    • 제18권5호
    • /
    • pp.589-593
    • /
    • 2014
  • Terahertz (THz) communication has important applications in high-speed and ultra broadband wireless access networks. The THz modulator is one of the key devices in a THz communications system. Wavelength division multiplexing (WDM) can expand the capacity of THz communications systems, so research on multi wavelength THz modulators has significant value. By combining photonic-crystal and THz technology, a novel type of multi wavelength THz modulator based on a triple-lattice photonic crystal is proposed in this paper. Compared to a compound-lattice photonic crystal, a triple-lattice photonic crystal has a larger gap width of 0.196. Simulation results show that six beams of THz waves can be modulated simultaneously with high performance. This modulator's extinction ratio is as large as 34.25 dB, its insertion loss is as low as 0.147 dB, and its modulation rate is 2.35 GHz.

CATV Overlay를 위한 EPON 망 구조에 대한 분석 (Analyzing the Architecture of EPON Network for CATV Overlay)

  • 이상연;김용태;이재정;이형섭
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
    • /
    • pp.117-120
    • /
    • 2003
  • PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

  • PDF

Turbidimetric Measurement for On-line Monitoring of SiO2 Particles

  • Kim, In-Sook;Kim, Yang-Sun;Lim, H.B.
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권6호
    • /
    • pp.801-805
    • /
    • 2004
  • In this work, the fundamental study of on-line monitoring of $SiO_2$ particles in the size range of 40 nm to 725 nm was carried out using turbidimetry. The size of particle was measured using a field emission scanning electron microscope (FE-SEM). The factors affecting on the turbidity were discussed, for example, wavelength, size, and concentration. In order to observe the dependence of turbidity on the wavelength, a turbidimetric system equipped with charged coupled detector (CCD) was built. The shape of the transmitted peak was changed and the peak maximum was shifted to the red when the concentration of particle was increased. This result indicates that the turbidity is related to the wavelength, which corresponds to the characteristic of the Mie extinction coefficient, Q, that is a function of not only particle diameter and refractive index but also wavelength. It is clear that a linear calibration curve for each particle in different size can be obtained at an optimized wavelength.

다파장 레이저빔을 이용한 알루미늄 합금의 응접특성 (Weldability of aluminum alloys by multi-wavelength laser beam)

  • 김종도;김정묵
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권5호
    • /
    • pp.567-574
    • /
    • 2007
  • Aluminum and aluminum alloys have high rate of lightness, recycling property and excellent specific strength. Fields using them have been widening because they ould satisfy both energy reduction and high efficiency in manufactures production. But they have many problems on welding due to high thermal conductivity and reflectivity, so the study to solve these problems ate proceeding actively around the world. This study was purposed to improve weldability and spread application range for aluminium alloys by using the unique property of aluminium which absorb high energy around $800{\mu}m$ wavelength and the higher temperature, the mote absorbtion of laser beam on preheating by multi-wavelength laser beam(pulsed Nd:YAG laser + diode laser with $808{\mu}m$ wavelength). The favorable mechanical properties were acquired by the test results of strength, hardness and leak of weld metal which had reduced its defect like crack and so on.

Wavelength-Swept Cascaded Raman Fiber Laser around 1300 nm for OCT Imaging

  • Lee, Hyung-Seok;Lee, Hwi Don;Jeong, Myung-Yung;Kim, Chang-Seok
    • Journal of the Optical Society of Korea
    • /
    • 제19권2호
    • /
    • pp.154-158
    • /
    • 2015
  • We experimentally demonstrated a novel wavelength-swept laser using a cascaded Raman gain around 1310 nm. A 1064/1310 wavelength division multiplexing (WDM) coupler and coupled fiber Bragg gratings mirrors at 1064, 1117, 1175, 1240 nm are effectively used to increase the power efficiency in a laser ring cavity with highly non-linear fiber (HNLF) of 2 km. Linear wavelength sweeping is demonstrated with the 100 Hz triangular driving signal to fiber Fabry-Perot tunable filter (FFP-TF) around the 1310 nm region. The measured sweeping range and output power were 27 nm and 2.1 mW, respectively, which are suitable for optical coherence tomography (OCT) imaging.

시간지연샘플링을 이용한 광섬유레이저의 파장변화검출 (Wavelength Readout of A Fiber Laser Using Time Delayed Quadrature Sampling)

  • 김종섭;송민호
    • 대한전자공학회논문지SD
    • /
    • 제41권3호
    • /
    • pp.31-38
    • /
    • 2004
  • 광섬유격자 센서어레이의 복조에 사용할 목적으로 광섬유레이저의 파장변화 검출방법을 제안하였다. 삼각파로 변조된 광섬유레이저의 출력 파장을 Mach-Zehnder 간섭계와 시간지연샘플링 기법으로 분석하였다. 피크간의 시간차를 측정하는 기존의 방법과 달리 파장변조 메카니즘의 비선형 특성에 무관하게 항상 선형적인 출력을 얻을 수 있었으며 6.5 ㎚의 스캔범위에서 약 20 pm의 파장분해능을 얻을 수 있었고, 이는 응답특성이 뛰어난 위상변조기를 사용할 경우 크게 개선될 수 있음을 보였다.

MULTI-WAVELENGTH FIBRIL DYNAMICS AND OSCILLATIONS ABOVE SUNSPOT WAVE PROPAGATION

  • MUMPUNI, EMANUEL S.;HERDIWIJAYA, DHANI;DJAMAL, MITRA;DJAMALUDDIN, THOMAS
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.59-60
    • /
    • 2015
  • High resolution, multi-wavelength images from the Dutch Open Telescope were used to study the detailed mechanisms that might be involved in the multiple layer solar atmosphere observed in high cadence multi-wavelength observations. With the exceptional data observed for active region NOAA 10789 on 2005 July 13th, we study the changing pattern of the fibril using multi-wavelength tomography of the $H{\alpha}$ line center and blue wing, Ca II H, and the G Band. It is believed that a long fibril that is rooted in the umbra, with longer apparent periodicity, may be due to morphological changes. To determine this, we conduct phase difference and coherency analysis between points along the fibril to understand how the wave propagates.

DWDM 송신을 위한 파장안정화 고출력 DFB LD Module (Wavelength stabilized high power cw DFB laser module for DWDM transmission)

  • 김종덕;이희태;박경현;송만규;강승구
    • 한국광학회지
    • /
    • 제11권3호
    • /
    • pp.206-209
    • /
    • 2000
  • DWDM 시스템에서 외부광변조기와 함께 중장거리 전송을 위한 광원으로 사용이 가능한 파장안정화 고출력 CW DFB 레리저 모듈을 셀계 및 제작하였다. 얇은 두께의 soild etalon과 PD array를 사용하여 단순하고 compact한 파장모니터 기능을 광원 모듈에 내장함으로써 DFB LD의 파장 변화를 감지 및 제어 할 수 있도록 하였다. 또한 높은 출력 특성을 가진 DFB LD와 43% 이상의 높은 광결합 효율을 가지는 모듈을 가지는 모듈의 광학적 설계 및 packaging 기술을 활용하여 mA의 CW 전류인가 조건에서 13nW의 고출력특성ㅇ르 가지는 모듈을 제작하여 그 특성을 분석하였다.

  • PDF

Compact, Wavelength-selectable, Energy-ratio Variable Nd:YAG Laser at Mid-ultraviolet for Chemical Warfare Agent Detection

  • Kim, Jae-Ihn;Cho, Ki Ho;Lee, Jae-Hwan;Ha, Yeon-Chul
    • Current Optics and Photonics
    • /
    • 제3권3호
    • /
    • pp.243-247
    • /
    • 2019
  • We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

파장 선형 스위핑 레이저를 이용한 광섬유 격자 센서의 스트레인 측정 (Measuring strain on fiber Bragg grating sensors with a linear wavelength sweeping laser)

  • 엄진섭
    • 센서학회지
    • /
    • 제30권6호
    • /
    • pp.420-428
    • /
    • 2021
  • In this study, linearized sweeping of a wavelength sweeping laser was realized. This technique was used to measure the strain on a fiber Bragg grating(FBG) sensor. For linear sweeping, PID control over the wavelength difference between linear and nonlinear sweeping was employed. The performance test showed that linear sweeping with a 46 nm range and a 1 kHz frequency held up well with a 99.5 % decrement in nonlinearity after the 120th feedback. When attached to a strain gage, the FBG sensor registered strain that matched the data sheet within a difference of 4.5[με]. Altogether, linear sweeping can play a leading role in monitoring a safety of large SOC structures as well as in other wavelength sweeping laser related fields.