• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.796-801
• /
• 2007

The optical performance of the mirror for satellite camera is highly dependent on the adhesive properties between the mirror and its support. In order to design a mirror with high optical performance, the mechanical properties of adhesives should be well defined. In this research, the mechanical properties of three kinds of space adhesives are studied. In case of the materials which show nearly incompressible behavior such as space adhesives, it is important to measure shear modulus which governs deviatoric stress components. Shear moduli of the adhesives are determined by using single lap adhesively bonded joint. For the shear tests, several points have been selected from $-20^{\circ}C$ to $50^{\circ}C$ which is operating temperature range of the adhesive. The shear modulus of each adhesive is expressed as a function of temperature. Characteristics of the adhesives are discussed regarding their temperature sensitivity. The analysis results of RMS wavefront error w.r.t shear modulus are presented.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권1호
• /
• pp.85-100
• /
• 2001

In this paper we propose a block-type parallel preconditioner for solving large sparse nonsymmetric linear systems, which we expect to be scalable. It is Multi-Color Block SOR preconditioner, combined with direct sparse matrix solver. For the Laplacian matrix the SOR method is known to have a nondeteriorating rate of convergence when used with Multi-Color ordering. Since most of the time is spent on the diagonal inversion, which is done on each processor, we expect it to be a good scalable preconditioner. Finally, due to the blocking effect, it will be effective for ill-conditioned problems. We compared it with four other preconditioners, which are ILU(0)-wavefront ordering, ILU(0)-Multi-Color ordering, SPAI(SParse Approximate Inverse), and SSOR preconditioner. Experiments were conducted for the Finite Difference discretizations of two problems with various meshsizes varying up to 1024 x 1024, and for an ill-conditioned matrix from the shell problem from the Harwell-Boeing collection. CRAY-T3E with 128 nodes was used. MPI library was used for interprocess communications. The results show that Multi-Color Block SOR and ILU(0) with Multi-Color ordering give the best performances for the finite difference matrices and for the shell problem only the Multi-Color Block SOR converges.

• Journal of Astronomy and Space Sciences
• /
• 제31권3호
• /
• pp.241-246
• /
• 2014

The Amon-Ra instrument is the main optical payload of the proposed EARTHSHINE satellite. It consists of a visible wavelength instrument and an IR energy channel instrument to measure a global Earth albedo. We report a new sensitivity technique for efficient alignment of the visible channel instrument. Whilst the sensitivity table method has been widely used in the alignment process, the straightforward application of the method tends to produce slow process convergence because of shop floor alignment practice uncertainties. We investigated the error sources commonly associated with alignment practices and used them when estimating the Zernike polynomial coefficients. Aided with single center field wavefront error (WFE) measurements and their corresponding Zernike polynomial coefficients, the method involves the construction and use of an experimental, instead of simulated, sensitivity table to be used for alignment state estimations. A trial alignment experiment for the Amon Ra optical system was performed and the results show that 71.28 nm in rms WFE was achieved only after two alignment iterations. This tends to demonstrate its superior performance to the conventional method.

• 한국광학회지
• /
• 제8권2호
• /
• pp.107-110
• /
• 1997

NBUR(Negative Branch Unstable Ring) 공진기를 갖는 Nd:YAG 레이저의 원고리형 출력광속을 이용하여 무회절 광속을 발진시켰다. Scraper 출력경을 통하여 나오는 원고리형 광속은 평면화된 위상파면을 갖고 있을 뿐 아니라 균일한 공간적 세기 분포를 가지므로 무회절 광속을 발진시키는데 직접 사용할 수 있으며 높은 출력세기 밀도를 갖게 할 수 있다는 장점이 있다. 구성된 NBUR 레이저의 출력광속의 단면은 내경 2.5 mm 외경 5 mm인 크기를 가졌다. 5 m 초점거리를 갖는 Fourier 변환 렌즈를 레이저 출력경으로부터 초점거리만큼 떨어진 지점에 설치하여 원고리형 출력광속의 먼거리 형태를 관측하였으며, 렌즈를 통하여 13 m 이상의 위치에서도 광속의 퍼짐이 없음을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 2001

Recently, the study on the vibration analysis of machinery is greatly important and ESPI is widely used because of its many attractive features. Firstly, ESPI can be used to measure the vibration mode shape and the phase in real-time. Secondly, the conventional measuring methode, such as accelerometers, take much time to measure the whole field of object, but ESPI needs shorter time than other methods. Because ESPI is a field-inspection method. Thirdly, ESPI is a non-contact measuring system. ESPI does not have influence on the specimen. Beyond these features, there are several advantages in ESPI system. In this paper, the Stroboscopic ESPI system is described for measurement of a vibration mode shape. The Stroboscopic ESPI system had been used to visualize the vibration mode shape, in which EO(Electro-Optic)modulator was used to chop CW(Continuous Wavefront)laser. But it was not easy to control EO modulator and quantified the vibration amplitude and the phase of circular metal plate. At first, we found resonant frequency of the specimen by using time-averaged ESPI method. Nextly, the amplitudes of specimen were quantified by using Stroboscopic ESPI and we compare the results which were obtained in several chopping ratio.

• 한국광학회지
• /
• 제13권2호
• /
• pp.98-104
• /
• 2002

비구면 광학부품의 수차 측정 및 성능 평가를 위해 특별 설계된 층밀리기 간섭계를 소개하고, 이와 더불어 층밀리기 간섭계가 갖는 자체의 계통오차를 측정결과로부터 제거하기 위한 보정 방법을 제안한다. 층밀리기 간섭계의 계통오차는 크게 간섭광학계가 갖는 광학오차와 간섭계의 기구부의 불완전에 기인한 층밀리기 방향의 직교오차로 구분할 수 있다. 이들 두 계통 오차들은 모두 본 논문에서 제안하는 방법으로 모두 보정될 수 있다. 보정 방법은 측정 대상물을 간섭계의 광축을 중심으로 회전하여 측정결과로부터 계통오차를 분리하는 자가보정 원리에 근거한다.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.234-242
• /
• 1999

Flow phenomena such as the pressure transients Inside a high-speed railway tunnel and the Impulsive waves at the exit of the tunnel are closely associated with the characteristics of the entry compression wave, which is generated by a train entering the tunnel. Tunnel entrance hood may be an effective means for alleviating the Impulsive waves and pressure transients. The objective of the current work is to explore the effects of the train nose shape and the entrance hood on the characteristics of the entry compression wave. Numerical calculations using the method of characteristics were applied to one-dimensional, unsteady, compressible flow field with respect to high-speed railway/tunnel systems. Two types of the entrance hoods and various train nose shapes were employed to reveal their influences on the entry compression wave for a wide range of train speeds. The results showed that the entry compression wave length increases as the train nose becomes longer and the train speed becomes lower. The entry compression wave length in the tunnel with hood becomes longer than that of no hood. Maximum pressure gradient in the compression wavefront reduces by the entrance hood. The results of the current work provide useful data for the design of tunnel entrance hood.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.577-584
• /
• 2000

Seismic refraction survey was peformed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and SIRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270 360m/s and 1550 1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• 대한전자공학회논문지SD
• /
• 제40권3호
• /
• pp.10-18
• /
• 2003

본 논문에서는 마흐-젠더 간섭계에서 진행파의 위상정보와 직교 편광을 이용하여 광학적 암호화 시스템을 제안하였다. 두 개의 서로 직교편광의 가간섭성에 의해 간섭현상이 제거되기 때문에 복호 영상이 안정하다. 암호화 과정에서는 원 영상이 수직편광과 수평편광간의 상대적인 위상차에 의해 랜덤한 편광상태를 가지는 영상으로 암호화 된다. 따라서 랜덤한 편광분포로부터 원 영상의 정보를 알 수 없다. 영상을 복호화하기 위해서는 암호화된 영상의 랜덤한 편광분포를 서로 직교하는 두 성분으로 나누고 키영상을 간섭계에 수직 경로에 위치시킨다. 복호 영상은 검광기를 사용하여 세기형태로 재생하였다.