• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2015

In this paper, the transmission of an improper-complex second-order stationary data sequence is considered over a strictly band-limited frequency-selective channel. It is assumed that the transmitter employs linear modulation and that the channel output is corrupted by additive proper-complex cyclostationary noise. Under the average transmit power constraint, the problem of minimizing the mean-squared error at the output of a widely linear receiver is formulated in the time domain to find the optimal transmit and receive waveforms. The optimization problem is converted into a frequency-domain problem by using the vectorized Fourier transform technique and put into the form of a double minimization. First, the widely linear receiver is optimized that requires, unlike the linear receiver design with only one waveform, the design of two receive waveforms. Then, the optimal transmit waveform for the linear modulator is derived by introducing the notion of the impropriety frequency function of a discrete-time random process and by performing a line search combined with an iterative algorithm. The optimal solution shows that both the periodic spectral correlation due to the cyclostationarity and the symmetric spectral correlation about the origin due to the impropriety are well exploited.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.245-251
• /
• 1997

In designing defibrillator, several parameters such as patient's transthoracic impedance, output energy level, peak current, and time duration of current waveform must be considered to generate optimum electrical shocks on the heart. Patient's transthoracic impendence depends on the physical and health condition of patient. In this study, before the development of a defibrillator, the range of above parameters value as circuit elements was determined to derive optimal waveform by predicting and analyzing the performance of designed circuit by means of simulation with the software, P-Spice. The efficiency of parameter design was verified through the performance test with the developed defibrillator.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.415-419
• /
• 2004

As the medical environment field has been facilitated by the rapid development of the information technologies and ubiquitous healthcare service based on network, the exchange of medical information between hospitals become more and more important. However, although most electrocardiograph vendors have provided digital modalities and their ECG data management systems, these were proprietary and not compatible with each other due to multiplicity of vendor specific formats and lack of open ECG data standards. Therefore, we aim to design and develop the ECG management system for archiving, saving, searching, viewing and transferring ECG data and the diagnostic reports. And the system is based on Clinical Document Architecture (CDA) developed by HL7 and DICOM Waveform Standard for the exchange of the structured diagnostic reports and the transfer of ECG data.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.207-210
• /
• 2001

This Paper presents a design of the fuzzy decision maker analyzable of output result of ECG signals. The fuzzy decision maker proposed are divided into two groups whose functions are different each other. The one rules when decision of heart rates, The other decision values for an interval of each points of waveform using of which static state values and abnormal values. We have chosen several variable used for composing condition and action part by knowledge of an Expert The result of outputs with fuzzy rules suggested was a proved of satisfied with by classify ECG arrythmia signals

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1368-1370
• /
• 2003

In this paper, the design and performance characteristics of a 3 kW class transformerless photovoltaic inverter was introduced. The field test results of the photovoltaic power inverter showed that the excellence of power quality, the characteristic of starting waveform, the stability and reliability of operation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.108-116
• /
• 2002

This paper presents the measurements and evaluation of voltage waveforms due to human electrostatic discharge(ESD). The principle of operation and design rule of a new device for measuring the ESD fast transient voltages with very fast rise time were described. Peak values and rise time of ESD voltages derived from a charged human body under a variety of experimental conditions were examined. The frequency bandwidth of the proposed voltage measuring system ranges from DC to 400[㎒]. The ESD voltage waveform is nearly equal to the ESD current waveform and the peak amplitude of ESD current waveform is roughly proportional to the ESD voltage in each experimental conditions. A rapid approach results in a discharge voltage with a faster initial rise time than for a slow approach. The voltages caused by direct finger ESDs have an initial slope with a relatively long, 10∼30[ns] rise time, but the amplitude is small. On the other hand, the voltages caused by direct hand/metal ESDs have a steep initial s1ope with 1 ∼3[ns] rise time, but an initial spike is very big. As a consequence, it was found that the ESD voltage and current waveforms strongly depend on the approach speed and material of intruder. These measurement results would be useful to design the ESD protective devices.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.319-321
• /
• 1998

Some design technologies of AC traction motor for rolling stocks are presented. AC Traction motors for rolling stocks are operated in worst conditions such as frequent mechanical vibrations, compact design with limited mounting space, severe thermal stress at outside, driven with nonsinusoidal voltage waveform inverters, and so on. Therefore, design procedures must be carefully investigated in the viewpoint of theoritically and practical use. Design procedure contains, the motor size determination, electromagnetic circuit design, insulation system design, vibrations and thermal expansion of rotor bars, temperature rise, as well as output characteristics.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.91-98
• /
• 2003

Software Communication Architecture(SCA) has been made to reduce the development period of new waveform applications by reusing design modules. Software Defined Radio(SDR) forum adopted SCA specification and follows its design concept. However, SCA specification does not describe interfaces and deployments of resources in details, which are software components, and how to implement them as well as how to communicate each other are another missing points in specification. In this paper, we propose a resource design methodology and details of adapter implementation for Core Framework(CF) that is a core set of open interface and services providing an abstraction of the underlying software and hardware layer. We also present SDR prototype system which communicates with resources implemented in different programming languages and processors in legacy environment through our design methodology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1519-1525
• /
• 2014

This paper presents the shape design for reducing cogging torque and characteristic analysis in Brushless DC (BLDC) motor. In this BLDC motor, ${\Delta}$(delta)-winding is applied, and in order to obtain the $60^{\circ}$ trapezoidal phase back-EMF waveform, permanent magnet shape design is carried out. And then, a method on specifying design parameters to effectively reduce cogging torque is developed. back-EMF, input voltage and input current which are analyzed by the Finite Element Method (FEM) are validated by experimental results. Also, efficiency calculations based on analysis and experimental results are performed and analyzed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.219-225
• /
• 2014

This paper describes an IC for Power Factor Correction. It can use electrical appliances which convert power from AC to DC. The power factor can be influenced not only phase difference of voltage and current but also sudden change of current waveform. This circuit enables current wave supplied to load by close to sinusoidal and minimum phase difference of voltage and current waveform. A self oscillated 10[kHz]~100[kHz] pulse signal converted to PWM waveform and it chops rectified full wave AC power which flows to load device. The multiplier and zero current detector circuit, UVLO, OVP, BGR circuits were designed. This IC has been designed and whole chip simulation use 0.5[um] double poly, double metal 20[V] CMOS process.