• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.125-134
• /
• 1989

A wave overtopping rate from a sea dike of various toe depths is formulated based on a weir model in an unidirectional flow. To evaluate the wave overtopping rate from a seadike on an artificial reef by the weir model, a numerical procedure for predicting wave transformations including the effect of forced wave breaking on the reef is constructed. After confirming the applicability of the model by experiments with regular and irregular waves, the effect of artificial reef on wave overtopping is discussed. So-called individual wave analysis method is shown to be applicable to the wave overtopping caused by irregular waves.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1303-1309
• /
• 2015

The behavior and flow characteristics of the floating wave energy converter were analyzed by using CFD in this study. The average significant wave height was confirmed as 0.5~2.0m from the Korean coastal sea area. This study was carried out by selecting a range of 1.0~1.6m in the wave height to simulate the operations of realistic wave energy converter system. The principle of a piston wave maker was applied in order to produce periodic wave. The behavior of the wave energy converter and the state of the wave overtopping according to the generated periodic wave were confirmed through the unsteady three-dimensional flow analysis. It was found that the wave overtopping rate according to the generated periodic wave was in range of the 11.6~30.0 kg/s.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.154-158
• /
• 2000

Hydraultic experiments were performed in 2-D were flume to investigate the stability o the breakwaters, the destruction of armor blocks and overtopping under irregular wave attack on the structures armored by \`Core-Loc\`. Overtopping rate and stability were examined and compared when armored by Core-Loc and by T.T.P. Results shows both type of blocks are stable and overtopping rates are similar in the adopted experimental condition. Therefore Core-Loc can replace some portion of T.T.P. which is uniquely used in Korea. Further integrated experimental data with Core-loc are need for destruction mechanism or overtopping rate.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.6
• /
• pp.668-676
• /
• 2017

A two-dimensional numerical investigation is performed to study the influence of slot width of multi-stage stationary floating overtopping wave energy devices on overtopping flow rate and performance. The hydraulic efficiency based on captured crest energy of different device layouts is compared with that of single-stage device to determine the effect of the geometrical design. The results show optimal trends giving a huge increase in overtopping energy. Plots of efficiency versus the relative slot width show that, for multi-stage devices, the greatest hydraulic efficiency is achieved at an intermediate value of the variable within the parametric range considered, relative slot width of 0.15 and 0.2 depending on design layouts. Moreover, an application of adaptive slot width of multi-stage device is investigated. The numerical results show that the overall hydraulic efficiency of non-adaptive and adaptive slot devices are approximately on par. The effect of adaptive slot width on performance can be negligible.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.258-265
• /
• 2022

In Korea, the hydraulic model tests for measuring the wave overtopping have been almost conducted with no bottom slope or single slope condition in Korea. In this study, the bottom seabed for the coastal road area was fabricated at the wave flume and the wave overtopping was measured. The overtopping rate was also measured with the numerical modelling by OLAFoam. The measuring data were compared with EurOtop manual. It could be known the the influence of the foreslope in front of the vertical wall was significant and the these effects should be concerned when designing the coastal structures. And also it could be known that OLAFoam could be used to predict the wave overtopping rate for the complex bottom topography.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.1
• /
• pp.1-13
• /
• 2015

Post-Katrina investigations revealed that most earthen levee damage occurred on the levee crest and landward-side slope as a result of either wave overtopping, storm surge overflow, or a combination of both. In this paper, combined wave overtopping and storm surge overflow of a levee embankment strengthened with high performance turf reinforcement mat (HPTRM) system was studied in a purely Lagrangian and meshless approach, two-dimensional smoothed particle hydrodynamics (SPH) model. After the SPH model is calibrated with full-scale overtopping test results, the overtopping discharge, flow thickness, flow velocity, average overtopping velocity, shear stress, and soil erosion rate are calculated. New equations are developed for average overtopping discharge. The shear stresses on landward-side slope are calculated and the characteristics of soil loss are given. Equations are also provided to estimate soil loss rate. The range of the application of these equations is discussed.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.35-41
• /
• 2007

In general, coastal damage is mostly occurred by the action of complex factors, like severe water waves. If the maximum storm surge height combines with high tide, severe water waves will overflow coastal structures. Consequently, it can be the cause of lost lives and severe property damage. In this study, using the numerical model, the storm surge was simulated to examine its fluctuation characteristics at the coast in front of Noksan industrial complex, Korea. Moreover, the shallow water wave is estimated by applying wind field, design water level considering storm surge height for typhoon Maemi to SWAN model. Under the condition of shallow water wave, obtained by the SWAN model, the wave overtopping rate for the dike in front of Noksan industrial complex is calculated a hydraulic model test. Finally, based on the calculated wave-overtopping rate, the inundation regime for Noksan industrial complex was predicted. And, numerically predicted inundation regimes and depths are compared with results in a field survey, and the results agree fairly well. Therefore, the inundation modelthis study is a useful tool for predicting inundation regime, due to the coastal flood of severe water wave.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.157-167
• /
• 2008

The aeration of an overtopping wave on a vertical structure generated by a plunging wave was investigated through laboratory measurements of void fraction. The overtopping wave occurring after wave breaking becomes multi-phased and turbulent with significant aeration, so that the void fraction of the flow is of importance. In this study, fiber optic reflectometer and bubble image velocimetry were employed to measure the void fraction, velocity, and layer thickness of the overtopping flow. Mean properties were obtained by ensembleand time-averaging the repeated instantaneous void fractions and velocities. The mean void fractions show that the overtopping wave is very high-aerated near the overtopping wave front and relatively low-aerated near the deck surface and rear free surface of the wave. The flow rate and momentum of the overtopping flow estimated using the measured data show that the void ratio is an important parameter to consider in the multiphase flow. From the similarity profiles of the depth-averaged void fraction, velocity, and layer thickness, one-dimensional empirical equations were obtained and used to estimate the flow rate and momentum of the overtopping flow.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.163-169
• /
• 2012

In this paper, model test on the Tapdong's revetment at Jeju-si has been conducted to figure out the causes of frequent occurrence of wave overtopping and to suggest the action plan. In the model test, the reflection coefficients were measured according to the change of wave periods for with and without armor stones. Also, the wave overtopping rate and the wave pressures inside revetment structure for 4 types of upper block were estimated for various wave heights and wave periods, which are chosen based on the NE design wave with 50 year return period. It is found that the increase of the upper structure's height and the modification of the curved protruding shape are effective in reducing the overtopping rate.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.