• 복식문화연구
• /
• 제14권6호
• /
• pp.1042-1055
• /
• 2006

The purpose of this study is to consider the formative characteristics of dance sports from such points of view as shapes, colors, material and decorations, and to examine artistic characteristics that are expressed through those elements. As a result, this study shows five artistic characteristics as follows; First, rhythmic characteristic is expressed with repeat of lines that is formed by pleats, shirring or gather, with duplication of ruffle's wave, with gradation of colors, with Moire-effect that is generated with overlap of see-through material, with glossy material that reflects lights to a great extent, with fringe. Second, bodily characteristic emphasizes the beauty of human bodies through direct or indirect body exposure by way of cut-and-open, see-throughness or close adhesion. Third, decorative characteristic is shown with beads, fringe, ruffle, embroidery, shirring, binding, or feather. Fourth, the beauty of female body is manifested to express eroticism, which is culminated by body exposure, body consciousness, use of illuminating or see-through material or colorful trimming. Finally, elegant characteristic is revealed through feminity, sophistication, and harmony that are expressed with black and white colors, see-through material, or bead trimmings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.426-426
• /
• 2009

Diagnostic X-ray system is general and basic medical equipment to be used in mostly medical organizations, but being bombed of radioactivity is a big weak point when irradiates a X-ray to the human body so that ICRP restricted the radiation exposure tolerance of the human body. In order to reduce being bombed, the many research and development is now advanced. A lots of diagnostic X-ray machines have currently used due to the increase of occurrence efficiency of X-ray and precisely the output control by using the inverter which is a high speed switching semiconductors. For getting the confidence of the X-ray machine, the same radiation occurrence, same evaluation, and same irradiation condition are necessary when evaluates X-ray irradiation. It is the most important part for the accuracy of the test result and the patient safety. This paper has produced the high voltage occurrence system of full-wave rectification method by using the LC resonance inverter, and evaluated the irradiation reproducibility in order to use it in diagnosis of the patient.

• ALGAE
• /
• 제26권1호
• /
• pp.61-71
• /
• 2011

Thirty populations of Chondrus crispus Stackhouse from Nova Scotia were collected during the years 1993 to 2011. Taken from estuaries, wave exposed open coasts, high intertidal rock pools and shallow subtidal habitats, the populations were evaluated for relative abundance of tetrasporophytic and gametophytic life history phases. Over 2,800 thalli were characterized using the resorcinol-acetal test to distinguish the kappa- and lambda-carrageenan containing fronds of gametophytes and tetrasporophytes, respectively. These populations had $77{\pm}5%$ gametophytes (mean ${\pm}95%$ confidence interval), with most populations having gametophyte : sporophyte ratios ranging from 2 : 1 to 9 : 1. No population had a dominance of tetrasporophytes, although two populations had 1 : 1 ratios. A meta-analysis of our data along with previously published accounts showed no significant changes in gametophyte dominance with respect to hypothesized gradients of wave exposure, salinity, or water depth. Significant changes occurred in ratios at five sites where replicate sampling occurred in different years. We conclude that C. crispus in Maritime Canada has a natural ratio of 3 : 1 or greater in stable conditions, and that lower ratios represent recovery from disturbance in which bare substratum is created that is subsequently colonized by carpospores from remaining gametophytic thalli.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.99-111
• /
• 2016

Seabed affected by scouring, sedimentation, and siltation occurrences often cause exposure, which induces risks to existing structures or crude oil or gas pipeline buried subsea. In order to prevent possible risks, more economical structure installation methodology is proposed in this study by predicting and managing the risk. Also, the seabed does not only consist of sandy material, but clayey soil is also widespread, and the effect of undrained shear strength should be considered, and by cyclic environmental load, pore water pressure will occur in the seabed, which reduces shear strength and allows particles to move easily. Based on previous research regarding sedimentation or erosion, the average value of external environmental loads should be applied; for scouring, a 100-year period of environmental conditions should be applied. Also, sedimentation and erosion are mainly categorized by the bed load and suspended load; also, they are calculated as the sum of bed load and suspended load, which can be obtained from the movement of particles caused by sedimentation or erosion.

• 한국전자파학회논문지
• /
• 제7권4호
• /
• pp.353-362
• /
• 1996

본 논문에서는 토끼를 대상으로 하여 그 두부에 전자파가 조사(照射)된 경우에 대해 토끼 두부를 3충 구모델로 근사해서 SAR분포를 계산하였다. 계산 결과를 확인하기 위해 주파수 2,450MHz인 마이크로파를 출력세기별로 5그룹으로 설정하여 각각에 대한 노출 전 후의 EEG를 전두부(前頭部)에서 측정하였다. 실험에서 전자파 조사 후에는 뇌전위의 전체평균값은 조금 감소히였고, 특히 $\theta$, $\delta$그리고 $\beta$파의 평균합성비율은 증가하였다. 이 결과는 마이크로파 조사후 전기적 생리활동의 감소와 뇌파의 속파화 경향을 나타낸다. 측정된 뇌전위로써 생체에 대한 전기 생리적 효과를 정량적으로 파악하여 최대허용노출(Maximum Permissible Exm posure)의 객관적인 추정을 하였다.

• 방사성폐기물학회지
• /
• 제18권3호
• /
• pp.337-346
• /
• 2020

Two commonly used ceramics in molten salt research are alumina and mullite. The two ceramics were exposed to a combination of rare earth chlorides (YCl₃, SmCl₃, NdCl₃, PrCl₃, and CeCl₃; each rare earth chloride of 1.8 weight percent) in LiCl-KCl at 773 K for approximately 13 days. Scanning electron microscopy with wave dispersion spectra was utilized to investigate a formation layer or deposition of rare earths onto the ceramic. Only the major constituents of the ceramics (Al, Si, and O₂) were observed during the wave dispersion spectra. X-ray fluorescence was used as well to determine concentration changes in the molten salt as a function of ceramic exposure time. This study shows no evidence of ionic exchange or layer formation between the ceramics and molten chloride salt mixture. There are signs of surface tension effects of molten salt moving out of the tantalum crucible into secondary containment.

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.516-521
• /
• 2009

X-ray system which is usefully used in diagnosis of the patient, being bombed of radioactivity is a big weak point when irradiates a X-ray to the human body so that ICRP restricted the radiation exposure tolerance of the human body. In order to reduce being bombed, the many research and development is now advanced. A lots of diagnostic X-ray machines have currently used due to the increase of occurrence efficiency of X-ray and precisely the output control by using the inverter which is a high speed switching semiconductors. For getting the confidence of the X-ray machine, the same radiation occurrence, same evaluation, and same irradiation condition are necessary when evaluates X-ray irradiation. It is the most important part for the accuracy of the test result and the patient safety. This research has produced the high voltage occurrence system of full-wave rectification method by using the LC resonance inverter, and evaluated the irradiation reproducibility in order to use it in diagnosis of the patient.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• Current Photovoltaic Research
• /
• 제10권2호
• /
• pp.49-55
• /
• 2022

With rapid growth in light-harvesting efficiency from 3.8 to 25.8%, organic-inorganic hybrid perovskite solar cells (PSCs) have attracted great attention as promising photovoltaic devices. However, despite of their outstanding performance, the commercialization of PSCs has been suffered from severe stability issues, especially for UV and humidity: (i) UV irradiation towards PSCs is able to lead UV-induced decomposition of perovskite films or catalytic reactions of charge-transporting layers, and (ii) exposure to surrounding humidity causes irreversible hydration of perovskite layers by the penetration of water molecules, resulting considerable decrease in their power-conversion efficiency (PCE). This review investigates current status of strategies to enhance UV and humidity stability of PSCs in terms of UV-management and moisture protection, respectively. Furthermore, the multifunctional approach to increase long-term stability as well as performance is discussed as advanced research directions for the commercialization of PSCs.

• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.461-466
• /
• 2014

체외 충격파 쇄석술시 쇄석기종에 따라 각각 장단점이 있으며, 전 처치로 인한 여러 가지 부작용이 보고되고 있다. 이에 전자기식 ESWL시 하부결석환자에서 적합한 충격파의 강도를 찾아보고, C-arm의 총 가동시간을 측정해 보았다. 본 연구는 2014년 1월부터 6월까지 경북지역 일개시의 C대학병원에서 전 처치를 시행하지 않고 ESWL을 받은 65명의 환자를 대상으로 하였다. 성비는 남자가 48명, 여자가 17명으로 남자가 더 많았으며, 연령은 50대가 가장 많았다. 하부요로결석의 발생은 왼쪽이 더 많았으며, 결석의 크기는 5mm 이하가 39명으로 가장 많았다. 적합한 충격강도는 1의 강도이며 통증을 호소하는 경우 C의 강도로 전환하여 충격을 가할 수 있다. 또한 C-arm의 총 가동시간은 $241.73{\pm}30.37$초로 나타났으며, 이것은 하부요로결석의 크기와 유의한 차이를 보였다(p<0.05). 따라서, ESWL시 전처치를 시행하지 않고 시술을 할 경우 요관 결석의 부위에 따라 적합한 충격강도와 충격빈도의 기준이 필요로 하며, C-arm 총 가동시간도 요관 결석의 발생부위에 따라 방사선으로 인한 피폭을 최소화하기 위한 총 가동시간에 대한 기준이 필요할 것으로 사료된다.