• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.21-30
• /
• 1997

본 논문은 복합지지형 초고속선에 사용될 pod형 물분사 추진장치에 대한 예인수조 실험 및 성능해석 결과를 보여준다. 선체와 물분사 흡입구간의 상호작용이 매우 작은 것으로 가정하고 선체저항 및 추진성능 실험을 토대로 시험선 운항시 성능을 해석하였다. 축류식 펌프를 갖는 pod형물분사 추진장치를 설계하고 단독특성시험 시스템을 개발하여 실험을 수행하였다. 실험결과로부터 펌프 성능, 제트효율, 흡입구 및 노즐의 손실계수 등 물분사 추진장치 설계 및 특성파악에 유용한 자료를 확보하였다. 실험결과는 설계요구조건과 비교적 좋은 일치를 보여준다.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.11-18
• /
• 1998

본 논문은 복합지지형 초고속 화물 시험선인 "나래"호에 장착된 물분사 추진장치에 대한 해상성능시험에 대하여 기술하였다. 물분사 추진 장치에서 제트 속도, 임펠러에 걸리는 추력 및 토오크 계측 방법에 대해 설명하였다. 해상성능시험 결과로부터 물분사 추진장치의 성능을 분석하였고, 1996년에 수행된 유사 물분사 추진장치 모형시험 결과와 비교하였다. 해상성능시험로부터 추정된 유효마력은 모형선 결과와 좋은 일치를 보여준다. 시험선의 최적 부상 높이는 0.75m로 추정되고 물분사 추진장치의 준추진효율은 15노트에서 0.315으로 추정되었다. 본 시험을 통하여 펌프의 성능, 제트 효율, 유입부 덕트와 노즐에서의 손실 등에 관한 유용한 자료를 확보하였으며, 모형시험 결과와 유사한 경향을 보여주었다.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.30-37
• /
• 2010

In order to control the weight balance of the waterjet propulsion ship, the pump's weight needed to be decreased. We reduced length of pump hub, overall length of pump and chord length of impeller and stator. To keep pump efficiency and cavitation performance similar to the $1^{st}$design pump, optimum design and experiment were conducted. This paper describes experimental method and numerical analysis for pump design. At the blade design stage, performance analysis of the pump is conducted using commercial CFD codes ($BladeGen^+$,CFX-10). Required performance and cavitation characteristics of the design pumps were measured and observed using the stand-alone test apparatus. The weight of the pump was successfully decreased through a series of pump design processes composed of blade design, performance analysis and model test.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.290-298
• /
• 2005

A study of design and analysis for the POD type waterjet is conducted. The analysis and design of waterjet system are more difficult than that of conventional propulsor because waterjet is complicatedly composed of many parts which are impeller, stator, inlet, nozzle, etc. The streamline method is traditionally used in the design of pump whose characteristics are similar to those of waterjet. This streamline method, however, has some limitation in analysis of a viscous flow as well as the interaction of inlet part of hull. In the present study, the developed CFD program is applied to the analysis of POD type waterjet. The developed program is first validated by comparing the existed experimental results. The designed waterjet system is also analyzed by the developed CFD program and analyzed results show that the performance of the present POD type waterjet is above the requirement.

• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.21-27
• /
• 2004

A waterjet propulsion system has many advantages compared with a conventional screw propeller especially for amphibious military vehicles because of a good maneuverability at low speed, good operating ability at shallow water, high thrust at low speed to aid maneuverability and exit from water, etc. Especially, compact design is important for the tracked-vehicle because of buoyancy in water and available space inside the tracked vehicle. The experiment is parametrically performed for various impeller diameters for more compact design. The experimental results are analyzed according to the ITTC 1996 standard analysis method as well as the conventional propulsive factor analysis method. The full-scale effective and delivered power of the tracked-vehicle are evaluated according to the variation of impeller diameter. This paper emphasized the effect of impeller diameter on the performance of waterjet system.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.197-204
• /
• 2005

A waterjet propulsion system has many advantages compared with a conventional screw propeller especially for amphibious armored wheeled vehicles because of a good maneuverability at low speed, good operation ability at shallow water, high thrust at low speed to aid maneuverability and exit from water, etc. The POD type waterjet is adequate for the present wheeled vehicle because the weight is lighter and L/B is longer than the conventional armored amphibious vehicle. Resistance and self-propulsion tests with a 1/3.5-scale model are conducted at PNU towing tank. Based on these measurements, the performance is analyzed according to ITTC 96 standard analysis method and also according to the conventional propulsive factor analysis method. Based on these two methods, the full-scale effective and delivered powers of amphibious armored wheeled vehicle are estimated. This paper emphasizes the analysis method of model test of the waterjet propulsion system for a amphibious armored wheeled vehicle and the model test technique together with the comparison of the two analysis methods.

• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.14-20
• /
• 2004

The aim of this paper is to analyze the steady performance of POD-type waterjet system by panel method. A surface panel method is applied to the present analysis. To analyze the compound propulsor. analysis program has been developed based on a perturbation potential method. The developed code has been validated by comparing the experimental data of shrouded propeller. The validated code has been applied to the POD-type waterjet system which can be used for the propulsion of amphibious vehicle. The computed results have been compared with experimental results. which shows a good agreement between them.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.15-23
• /
• 2004

In order to investigate efficiency and flowfield charateristics of the intake-diffuser for the ship waterjet propulsion, new experimental verification technology was set up in the cavitation tunnel. 1-hole and 5-hole pilot tubes were designed and manufactured to measure the pressure and velocity distributions at intake-diffuser entrance and impeller inlet. The calibration of the 5-hole pilot tubes is conducted at the cavitation tunnel The cavitation inception occurs at the intake lip, and the occurrence position depends on IVR (Inlet Velocity Ratio) condition. The present experimental device will be applied sufficiently for the development of the design and performance improvement technologies.

• 대한조선학회논문집
• /
• 제36권2호
• /
• pp.9-21
• /
• 1999

물분사 추진장치(waterjet)는 현재 고속선의 추진기로 폭넓게 사용되고 있으나, 입구면(inlet) 형상에 따른 효율 문제와 제작상의 어려움으로 인해 제작사는 한정되어 있다. 입구면 형상 설계에 있어서 가장 중요한 문제는 효율에 크게 영향을 주는 공동(cavitation) 발생을 최소화하는 것이다. 본 논문에서는 포텐셜 유동해석에 의해 공동발생이 최소화되는 최적 형상을 찾기 위해, 평접형(flush type) 이차원 물분사 추진장치의 입추면 형상을 수치계산 모델로 택하여 이차원 단면으로 가정하고, 유동해석을 수행하였다. 형상 파라미터의 변화를 통해 얻어진 다양한 입구면 형상에 대해 수치계산을 수행하여, 공동 발생에 미치는 입구면 형상의 영향을 조사하였고, 이를 바탕으로 최적 형상을 얻을 수 있는 형상해석 기법을 확립하였다. 또한 주어진 입구면 주위의 압력분포를 입력자료로 하여 입구면 형상이 찾아지도록 하는 형상 설계법을 확립하였다. 입구면의 형상 해석 및 형상 설계시 이용한 포텐셜 유동해석은 최근 공동문제 해석에 적용되어 좋은 결과를 주고 있는 포텐셜을 기저로 한 패널법[1,2]을 적용하였다. 형상 해석을 수행하여 얻어진 결과와 Kashiwadani[3,4]의 결과를 비교하여 근사한 결과를 얻은 것으로 본 논문의 형상 해석 기법의 우수성을 알 수 있었다. 형상 해석 결과로 얻어진 압력분포를 입력자료로 하여 입구면의 lip과 ramp에 대한 형상 설계를 수행한 결과 모두 만족스러운 결과를 얻었다.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.127-135
• /
• 2009

The performance of the waterjet system of 180 ton class fishing guard ship has been experimentally studied. A waterjet propulsion system has many advantages in comparison with a conventional screw propeller especially for high speed craft because of its good cavitation performance. Recently waterjet system has been applied to fishing boats and fishing guard ship because of avoiding a net problem although their speeds are not so high. This paper describes experimental procedure and analysis method of resistance and self-propulsion tests with a 1/14.46-scale model. Experimental results were analyzed according to ITTC 96 standard method. The full-scale effective power and delivered power of the ship were also analyzed and the full-scale speed predicted from the model test results shows a good agreement with the full-scale result from the sea trial tests.